Part number
A9MEM1593
$470.58 On request Dispatch — · From TürkiyeGet a Quote
PowerLogic

Schneider Electric A9MEM1593 PowerTag Energy R2000 3P/3P+N 2000 A Busbar Cable Mounted Wireless Energy Sensor

PowerTag Energy R2000 wireless sensor, 3P or 3P+N, 2000 A, on bare or insulated busbars, or cables, via a flexible sensor loop.

Rated current
2000 A
Rated operational voltage
100–277 V AC
Communication
2.4 GHz wireless, IEEE 802.15.4
Description

About the A9MEM1593

The Schneider Electric A9MEM1593 PowerTag Energy R2000 is a 3P or 3P+N wireless energy sensor rated 2000 A maximum current (300 A base current), on bare or insulated busbars, or cables, via a flexible sensor loop. Its Rope sensor clips around a closed 100 mm busbar or cable loop instead of a breaker body, reading up to 2000 A. It reports active energy, active power, current, voltage and power factor to IEC 61557-12 Class 1 accuracy over a 2.4 GHz IEEE 802.15.4 radio link to a PowerTag-compatible concentrator.

Certifications & Standards

  • UL listed
  • CE
  • DNV Marine
  • IEC 61557-12
  • IEC 61010-1
  • IEC 61010-2-030
  • IEC 61326-1
  • ETSI EN 300 328
  • ETSI EN 301 489-1

Selection Notes

Reserve the A9MEM1593 for the largest main-switchboard busbars and Masterpact NW incomers up to 2000 A -- the top of the Rope family, with the same mounting method and gateway options as the R200/R600/R1000 variants, so one concentrator can mix sensor sizes across a switchboard without changing communication hardware.

Specification

Full specification

75 values · Last verified 30 Oct 2026

Main 20

Range of product PowerLogic
Product name PowerTag R2000
Product or component type Energy sensor
Poles 3P, 3P + N
Maximum current [Imax] 2000 A
[Ib] Basic current 300 A
Starting current 1200 mA
Saturation current 4000 A
Product specific application Energy management, Overload alarm, Power factor, Load monitoring, Circuit monitoring
Concentrator compatibility EcoStruxure Panel Server Entry, EcoStruxure Panel Server Universal, EcoStruxure Panel Server Advanced, PowerLogic T300, Harmony Hub, Acti9 PowerTag Link, Acti9 PowerTag Link HD
Range compatibility Masterpact MasterPact MTZ for switch disconnector, Masterpact MasterPact NW, Masterpact MasterPact NT, Compact NS Compact NS100, Compact NS Compact NS250, Compact NS Compact NS400, Compact NS Compact NS630, Acti9, TeSys
Type of measurement Active and reactive energy, Apparent energy, Active and reactive power, Apparent power, Current, Voltage, Power factor, Internal temperature, Frequency
Accuracy class Class 1 active energy conforming to IEC 61557-12, Class 2 reactive energy conforming to IEC 61557-12, Class 2 apparent energy conforming to IEC 61557-12, Class 1 active power conforming to IEC 61557-12, Class 2 reactive power conforming to IEC 61557-12, Class 2 apparent power conforming to IEC 61557-12, Class 1 current conforming to IEC 61557-12, Class 0.5 voltage conforming to IEC 61557-12, Class 1 power factor conforming to IEC 61557-12, Class 0.5 frequency conforming to IEC 61557-12
Metering type Active energy E -a- IN/OUT 0...281 x 10exp(9) kWh at total per phase, Active energy E -a- IN/OUT 0...281 x 10exp(9) kWh at partial per phase, Active energy E -a- IN/OUT 0...281 x 10exp(9) kWh at 3-phase total, Active energy E -a- IN/OUT 0...281 x 10exp(9) kWh at 3-phase partial, Reactive energy E -rA- IN/OUT 0...281 x 10exp(9) kVARh at total per phase, Reactive energy E -rA- IN/OUT 0...281 x 10exp(9) kVARh at partial per phase, Reactive energy E -rA- IN/OUT 0...281 x 10exp(9) kVARh at 3-phase total, Reactive energy E -rA- IN/OUT 0...281 x 10exp(9) kVARh at 3-phase partial, Apparent energy E -apA- 0...281 x 10exp(9) kVAh at total per phase, Apparent energy E -apA- 0...281 x 10exp(9) kVAh at partial per phase, Apparent energy E -apA- 0...281 x 10exp(9) kVAh at 3-phase total, Apparent energy E -apA- 0...281 x 10exp(9) kVAh at 3-phase partial, Active power P, P1, P2, P3, Reactive power Q, Q1, Q2, Q3, Apparent power S, S1, S2, S3, Current I1, I2, I3, Calculated neutral current, Voltage U12, U23, U31, Voltage V1N, V2N, V3N, Frequency 45...65 Hz, Power factor at per phase, Power factor at total
Mounting location Top or bottom
Mounting support Busbar, Cables
Product destination Switchboard
Event management Voltage loss with measured current at voltage loss
Transmission support medium Radio frequency 2.4…2.4835 GHz conforming to IEEE 802.15.4
Emission power 10 mW

Complementary 17

Form factor Rope
Mounting mode Clip-on (DIN rail)
Electrical connection (voltage sensing & power supply) Removable spring terminal block
Cable cross section 1 rigid cable 0.2…1.5 mm² without cable end, 1 stranded cable 0.2…2.5 mm² without cable end, 1 stranded cable 0.25…1.5 mm² with cable end
Wire stripping length 11 mm
Cable length 1 m for sensor
current sensor diameter Closed: 100 mm
supply voltage 100...277 V AC, +/- 20 %, phase to neutral, 173...480 V AC, +/- 20 %, phase to phase
Network frequency 50 Hz, 60 Hz
Maximum power consumption 3 VA
Standards IEC 61557-12, IEC 61010-1, ETSI EN 301 489-1, IEC 61010-2-030, IEC 61326-1, ETSI EN 300 328
Product certifications UL listed, IEC, DNV Marine
Number of 9mm pitches on Din rail 2
Height Base unit: 105 mm
Width Base unit: 18 mm
Depth Base unit: 67.5 mm
Colour White (RAL 9003)

Environment 15

Maximum conductor temperature 105 °C
Quality labels CE
Directives 2014/53/EU - radio equipment directive
Operating altitude 0...2000 m
Ambient air temperature for operation -25…70 °C
Ambient air temperature for storage -40…85 °C
Overvoltage category IV conforming to IEC 61010-1
Measurement category Category IV conforming to IEC 61010-2-030
IP degree of protection IP20 conforming to IEC 60529
IK degree of protection IK05
Pollution degree 3
Relative humidity 0…95 % at 55 °C conforming to IEC 60721-3-3
Vibration resistance 3M4 conforming to IEC 60721-3-3
Electromagnetic compatibility Industrial electromagnetic environment conforming to IEC 61326-1, Radiated EMC conforming to ETSI EN 301 489-17, Electromagnetic emission conforming to IEC 62311
environmental characteristics Indoor use
Show all 75 specifications ↓ Show less ↑23 more values in Identification, Contractual warranty, Logistics.

Identification 6

Part number A9MEM1593
Brand Schneider Electric
Condition New, factory sealed
Source Schneider Electric and its authorised distributors
Warranty Manufacturer warranty
Lifecycle status Active, in production

Contractual warranty 1

Warranty (in months) 18

Logistics 16

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 8.300 cm
Package 1 Width 17.500 cm
Package 1 Length 20.000 cm
Package 1 Weight 562.000 g
Unit Type of Package 2 S03
Number of Units in Package 2 7
Package 2 Height 30.000 cm
Package 2 Width 30.000 cm
Package 2 Length 40.000 cm
Package 2 Weight 4.434 kg
Shipping weight 0.562 kg
Ships from Türkiye
Dispatch —
Stock On request

Source: manufacturer data · Last verified: 30 Oct 2026

Documents

Documents for A9MEM1593

No documents are on file for this part yet.

Ask us for the datasheet
Certifications

Certifications and standards

  • UL
  • Marine
  • IEC 61557-12
  • IEC 61010-1
  • ETSI EN 301 489-1
  • IEC 61010-2-030
  • IEC 61326-1
  • ETSI EN 300 328
Quick answers

Questions about the A9MEM1593

What is the rated current of A9MEM1593?

The rated current of A9MEM1593 is 2000 A.

Which supply voltage is A9MEM1593 rated for?

The rated operational voltage of A9MEM1593 is 100–277 V AC.

What is the HS code of A9MEM1593 for customs?

The tariff (HS) code on file for A9MEM1593 is 902830.

Where does A9MEM1593 ship from, and how fast?

A9MEM1593 ships from Türkiye. Shipping calculated at checkout · import duties and taxes paid on arrival.

Reviews

Customer reviews

Series

Schneider Electric PowerLogic

Brand
Schneider Electric
Series
PowerLogic
$470.58 On request
Get a Quote
Quote

Get a Quote

Genuine parts

Genuine, factory-sealed parts

Schneider Electric · A9MEM1593

Every part on Stoklink is new, unused and made by the manufacturer named on the page.

Condition
New and unused, in the manufacturer's factory-sealed packaging.
Sourced from
Schneider Electric and its authorised distributors.
Warranty
The manufacturer's warranty applies.
If a part is not genuine
We refund the full amount.

Added to cart Could not add to cart

View cart