Fuse switch disconnectors from Mersen, Schneider Electric and ABB cover ratings from 20 A to 1600 A in 1-pole to 4-pole versions. The range holds over 320 products, including Mersen MULTIBLOC, MULTIVERT and ProGrid, and Schneider Electric FuPacT. Stoklink ships worldwide from Turkey on EXW terms, and quotes for project volumes are available on request.
What's in this range
- MULTIBLOC NH Size 00 devices, 160 A, 690 VAC, for bottom fitting.
- MULTIVERT and i-Xtensio devices for NH Size 3, 630 A, 690 VAC.
- ProGrid Size 1, 2 and 3 for busbar systems, up to 630 A at 690 V.
- LINOCUR D02 switch disconnectors for 63 A.
- FuPacT ISFT and ISFL fuse switch disconnectors, 160 A to 1250 A.
-
Fuse Switch Disconnector Accessories - busbar supports, labels and fitting sets.
How to choose
- NH size: Size 00 to Size 4 sets the maximum fuse current.
- Rated current and voltage: choose the device at or above the fuse rating, for example 690 VAC or 800 VAC.
- Poles: 3-pole, 4-pole, or 3 x 1-pole for busbar-mounted designs.
- Mounting: bottom fitting, DIN rail, or busbar system with 60, 100 or 185 mm spacing.
- Standard: IEC 60947-3 for switch disconnectors with fuses.
FAQ
What does a fuse switch disconnector do?
It combines a load-break switch and fuse holder in one device. You isolate the circuit and protect it against short circuit.
What is the difference between 1-pole and 3-pole switching?
A 3-pole device switches all phases together. A 3 x 1-pole device switches each phase separately and is often mounted on a busbar system.
Can you quote project quantities?
Yes. Stoklink ships worldwide from Turkey on EXW terms, with quotes for project volumes.
