VFD vs Servo Drive: Key Differences
A side-by-side comparison of VFD and servo drive motor type, feedback, dynamic response, overload rating, cost, and applications for industrial engineers.
- Part number
- 6SL3130-7TE23-6AA3
Low stock
Dispatch
Planned dispatch date. We aim to ship within 1 business day. Depending on warehouse workload it can take 2–3 business days.
· From Türkiye
0
SINAMICS S120Siemens 6SL3130-7TE23-6AA3 SINAMICS S120 Active Line Module 60A 36kW Drive Module
SINAMICS S120 Active Line Module, 3AC 380-480V in, DC 600V/60A/36kW regulated out, 65kA, IP20
Description
About the 6SL3130-7TE23-6AA3
About the 6SL3130-7TE23-6AA3
The Siemens 6SL3130-7TE23-6AA3 is a SINAMICS S120 Active Line Module rated 60A, 36kW, converting 3AC 380-480V line input into a regulated DC 600V link at 1.35 x line voltage in Smart Mode. It carries a 65kA short-circuit strength rating and includes the DRIVE-CLiQ cable, with internal air cooling in the Bookize frame.
Selection Notes
The Active Line Module regulates the DC link through a closed-loop controlled rectifier, rated continuously at 36kW / 60A with a 117A maximum output, marginally below a companion Smart Line Module's 118A maximum at the same frame size - pick it when line-friendly sinusoidal current draw and a controlled DC-link voltage are required rather than the simpler uncontrolled rectifier a Smart Line Module provides. The 65kA short-circuit strength and 342-528V line voltage range match the Smart Line Module class, so the choice comes down to controlled versus uncontrolled infeed, not current rating. Conductor cross-section runs 2.5 to 50mm2 with up to 630m of shielded cable to the line reactor or filter.
Applications
Used as the mains-side infeed module in a SINAMICS S120 Bookize drive line where regenerative braking energy needs to be fed back into the grid, alongside Motor Modules sharing the same DC link. Degree of protection is IP20 / UL open type for panel-mounted installation.
Specification
Full specification
Electrical data 11
| Input: Number of phases | 3 AC |
|---|---|
| Input: Line voltage | 342 ... 528 V |
| Input: Line frequency | 47 ... 63 Hz |
| Input: Short-circuit strength 1) | 65 kA |
| Fundamental power factor cos phi | 1 2) |
| Total | 1.00 1.00 0.96 |
| Overvoltage category | Class III |
| DC link voltage 3): at 380 V ... 400 V AC, factory setting | 600 V |
| DC link voltage 3): at 400 V ... 415 V AC, factory setting | 625 V |
| DC link voltage 3): DC-link voltage | 1.35 x line voltage (Smart Mode) |
| Electronics power supply with DC | 24 V (-15 % / 20 %) |
Connections 5
| Line side: Design | M6 bolt (X1) |
|---|---|
| Line side: Conductor cross-section | 2.50 ... 50.00 mm² (AWG 14 ... AWG 1) |
| PE conductor | M6 screw |
| Line length, max.: Shielded | 630 m (2,066.93 ft) |
| Line length, max.: Unshielded | 850 m (2,788.71 ft) |
Mechanical data 5
| Degree of protection | IP20 / UL open type |
|---|---|
| Type of construction | Booksize |
| Dimensions: Width | 150 mm (5.91 in) |
| Dimensions: Height | 380 mm (14.96 in) |
| Dimensions: Depth | 270 mm (10.63 in) |
Show all 59 specifications ↓ Show less ↑38 more values in Identification, Rated data, General technical specifications, Ambient conditions, Standards, Logistics.
Identification 6
| Part number | 6SL3130-7TE23-6AA3 |
|---|---|
| Brand | Siemens |
| Condition | New, factory sealed |
| Source | Siemens and its authorised distributors |
| Warranty | Manufacturer warranty |
| EAN | 4025515005445 |
Rated data 18
| Infeed power: Rated value | 36 kW (40 hp) |
|---|---|
| Infeed power: for S6 duty | 47 kW |
| Infeed power: Maximum | 70 kW |
| Regenerative feedback power: Rated value | 36 kW (40 hp) |
| Regenerative feedback power: for S6 duty | 47 kW |
| Regenerative feedback power: Maximum | 70 kW |
| DC-link current: at 600 V DC | 60 A |
| DC-link current: for S6 duty | 79 A |
| DC-link current: Maximum | 117 A |
| Input current: at 380 V AC 3-phase | 58 A |
| Input current: at 400 V AC 3-phase | 55 A |
| Input current: at 480 V AC 3-phase | 46 A |
| Input current: at 400 V S6 duty | 71 A |
| Input current: at 400 V, maximum | 107 A 1.5 A |
| for electronics power supply at | 24 V DC |
| for DC-link connection | 20 A 200 A |
| DC link capacitance: of the Active Line Module | 1,410 µF |
| DC link capacitance: of the drive system, maximum | 20,000 µF |
General technical specifications 2
| Sound pressure level | 65 dB |
|---|---|
| Losses 10) | 0.67 kW |
Ambient conditions 5
| Ambient temperature in operation | 0 ... 40 °C (32 ... 104 °F) |
|---|---|
| Cooling air throughput | 0.031 m³/s (1.095 ft³/s) |
| Installation altitude | 1,000 m (3,280.84 ft) |
| Type of cooling 11) | Internal air cooling |
| RI suppression | Active Line Module + Active Interface Module: Category C3 according to EN 61800-3 up to 350 m (1148 ft) total cable length. With line filter: Category C2 according to EN 61800-3 up to 350 |
Standards 2
| Compliance with standards | CE, cULus |
|---|---|
| Page 1 of 2 | Generated Sun Nov 1 04:07:16 CET 2026 |
Logistics 5
| Net weight | 10 kg |
|---|---|
| Shipping weight | 11.7 kg |
| Ships from | Türkiye |
| Dispatch | 13 Nov |
| Stock | Low stock |
Source: manufacturer data · Last verified: 01 Nov 2026
Documents
Documents for 6SL3130-7TE23-6AA3
No documents are on file for this part yet.
Ask us for the datasheet
Quick answers
Questions about the 6SL3130-7TE23-6AA3
What is the rated current of 6SL3130-7TE23-6AA3?
The rated current of 6SL3130-7TE23-6AA3 is 60 A.
Which supply voltage is 6SL3130-7TE23-6AA3 rated for?
The rated operational voltage of 6SL3130-7TE23-6AA3 is 380–480 V AC.
What motor power is 6SL3130-7TE23-6AA3 rated for?
The rated motor power of 6SL3130-7TE23-6AA3 is 36 kW.
What is the HS code of 6SL3130-7TE23-6AA3 for customs?
The tariff (HS) code on file for 6SL3130-7TE23-6AA3 is 85044083.
What is the EAN of 6SL3130-7TE23-6AA3?
The EAN (GTIN) of 6SL3130-7TE23-6AA3 is 4025515005445.
Where does 6SL3130-7TE23-6AA3 ship from, and how fast?
6SL3130-7TE23-6AA3 ships from Türkiye. Shipping calculated at checkout · import duties and taxes paid on arrival. Stock items are dispatched within 1–2 business days.
Guides
Guides for servo drives
What Benefits Do Schneider Soft Starters Offer?
Discover how Schneider soft starters reduce mechanical stress, cut energy peaks, and extend motor life across demanding industrial uses. Shop at Stoklink.
How Do Schneider Soft Starters Reduce Energy Costs?
Schneider soft starters reduce energy costs by limiting inrush current, lowering demand charges, and minimizing mechanical wear on motors. Shop at Stoklink.
Reviews
Customer reviews
Series
Siemens SINAMICS S120
- Brand
- Siemens
- Series
- SINAMICS S120
