ABB 1SDA067095R1 XT2N 160 Ekip Dip LS/I In=160A 4pFF InN=100% 4-Pole 160A Fixed Molded Case Circuit Breaker

The ABB 1SDA067095R1 (XT2N 160 Ekip Dip LS/I In=160A 4pFF InN=100%) is a 160 A, 4-pole, fixed-mounted molded case circuit breaker (MCCB) from the Tmax XT2 range, ABB's current-generation MCCB series (160 A frame). It is fitted with an Ekip Dip LS/I electronic trip unit and is rated 36 kA Icu at 400 V AC. Dimensions (W × H × D) are 120 mm × 130 mm × 82.5 mm and weight is 1.6 kg.

Technical Specifications

Certifications & Standards

• IEC 60947-2: International standard for low-voltage switchgear and controlgear, circuit breakers
• CE: Conformité Européenne, meets EU safety, health, and environmental requirements
• ATEX: Certified for use in potentially explosive atmospheres per EU Directive 2014/34/EU
• VDE: Verified by Verband der Elektrotechnik to German and European electrical safety standards
• RoHS: Compliant with EU Directive 2011/65/EU on restriction of hazardous substances
• REACH: Compliant with EU Regulation (EC) No 1907/2006 on chemical safety
• EU Directive 2011/65/EU: RoHS Directive, restriction of hazardous substances in electrical equipment
• Amendment 2015/863: EU RoHS amendment extending restricted substance list
• EN 45555: General methods for assessing the energy efficiency and other resource aspects of energy-related products
• UL 2799: Zero waste to landfill environmental claim validation
• WEEE: Compliant with EU Waste Electrical and Electronic Equipment Directive 2012/19/EU

Selection Notes

• Rated current is 160 A; check it against the continuous load current of the circuit being protected.
• Icu is 36 kA at 400 V AC; confirm it is equal to or higher than the prospective fault current at the installation point.
• This is a 4-pole version with the neutral pole rated 100%; use it where the neutral conductor must be switched, and confirm the pole count matches the system. Mounting is fixed (not plug-in or withdrawable).
• The Ekip Dip LS/I is an electronic trip unit with long-time (L), short-time (S) and instantaneous (I) protection, so thresholds can be coordinated with other devices.