ABB 1SDA067092R1 XT2N 160 Ekip Dip LS/I In=63A 4p F F 4-Pole 63A Fixed Molded Case Circuit Breaker

The ABB 1SDA067092R1 (XT2N 160 Ekip Dip LS/I In=63A 4p F F) is a 63 A, 4-pole, fixed-mounted molded case circuit breaker (MCCB) from the Tmax XT2 range, ABB's current-generation MCCB series (160 A frame). It is fitted with an Ekip Dip LS/I electronic trip unit and is rated 36 kA Icu at 400 V AC. Dimensions (W × H × D) are 120 mm × 130 mm × 82.5 mm and weight is 1.6 kg.

Technical Specifications

Certifications & Standards

• CE: Conformité Européenne, meets EU safety, health, and environmental requirements
• IEC 60947-2: International standard for low-voltage circuit breakers
• RoHS: Restriction of Hazardous Substances, compliant with EU Directive 2011/65/EU
• EU Directive 2011/65/EU: RoHS 2, restriction of hazardous substances in electrical equipment
• EU Directive 2015/863: RoHS 3 amendment, updated restricted substance list
• REACH: Registration, Evaluation, Authorisation and Restriction of Chemicals compliance
• ATEX: Certified for use in explosive atmospheres per EU ATEX directive
• VDE: Verband der Elektrotechnik, German electrotechnical quality and safety certification
• UL 2799: UL standard compliance for electrical equipment
• WEEE: Waste Electrical and Electronic Equipment Directive, registered for proper disposal

Selection Notes

• Rated current is 63 A; check it against the continuous load current of the circuit being protected.
• Icu is 36 kA at 400 V AC; confirm it is equal to or higher than the prospective fault current at the installation point.
• This is a 4-pole version; use it where the neutral conductor must be switched, and confirm the pole count matches the system. Mounting is fixed (not plug-in or withdrawable).
• The Ekip Dip LS/I is an electronic trip unit with long-time (L), short-time (S) and instantaneous (I) protection, so thresholds can be coordinated with other devices.