Part number
6EP1935-6MF01
Model no
Battery module
$252.54 On request Dispatch — · From TürkiyeGet a Quote
Manufacturer phase-out

Siemens has announced the end of 6EP1935-6MF01

Once production ends, supply depends on remaining stock.

No replacement announced yet. Tell us the application and we will propose an alternative.

Siemens 6EP1935-6MF01 SITOP Battery Module 24V 12Ah Maintenance-Free DC UPS Module

SITOP battery module, 24V/12Ah maintenance-free lead-acid, for SITOP DC UPS modules 6A/15A/40A.

Rated current
30 A
EAN
4025515150503
Description

About the Battery module

The Siemens 6EP1935-6MF01 is a SITOP battery module with 24 V/12 Ah maintenance-free sealed lead-acid batteries, built to extend runtime on the SITOP DC UPS modules rated 6 A, 15 A and 40 A. It delivers up to 30 A in buffering mode and up to 30 A peak current, with a 20 A/32 V battery fuse for short-circuit protection and a maximum 3 A charging current.

Certifications & Standards

  • CE
  • EAC
  • Shipbuilding
  • ABS
  • DNV
  • EPD

Selection Notes

This 12 Ah battery pairs with SITOP DC UPS modules across the 6 A, 15 A and 40 A range - verify buffering runtime against the connected UPS module's load rather than this module's 30 A output-current ceiling, which is a maximum, not a guaranteed runtime figure. The 20 A/32 V battery fuse and Class III protection rating fix the safety boundary for the pack itself, and wall or flat-surface keyhole mounting keeps the 9 kg pack out of the UPS module's own footprint. Service life drops from 4 years at 20 degC to 2 years at 30 degC, so ambient temperature at the installation site is the main variable to check before setting replacement intervals.

Applications

Used as the battery back-up stage in SITOP DC UPS installations protecting PLCs, drives and control panels through mains interruptions, where the 6 A, 15 A or 40 A UPS module handles power management and this module supplies the stored 24 V DC energy.

Specification

Full specification

74 values · Last verified 01 Nov 2026

General information 5

product brand name SITOP
product type designation Battery module
product designation Battery module 12 Ah
type of battery maintenance-free lead-acid batteries
product version Extension module/battery module

Electrical data 6

end-of-charge voltage at DC: at -10 °C recommended 29 V
end-of-charge voltage at DC: at 0 °C recommended 28.4 V
end-of-charge voltage at DC: at 20 °C recommended 27.3 V
end-of-charge voltage at DC: at 30 °C recommended 26.8 V
end-of-charge voltage at DC: at 40 °C recommended 26.6 V
end-of-charge voltage at DC: at 50 °C recommended 26.3 V

Output 5

battery capacity 12 A·h
output current in buffering mode maximum 30 A
peak current 30 A
charging current maximum 3 A
output voltage at DC rated value 24 V
Show all 74 specifications ↓ Show less ↑58 more values in Identification, Interfaces, Protection and monitoring, Safety, Standards, specifications, approvals, Standards, specifications, approvals hazardous environments, Standards, specifications, approvals marine classification, Standards, specifications, approvals Environmental Product Declaration, Ambient conditions, Service life, Connection method, Mechanical data, Accessories, Additional information, Version Classification, Logistics.

Identification 10

Part number 6EP1935-6MF01
Type designation Battery module
Brand Siemens
Condition New, factory sealed
Source Siemens and its authorised distributors
Warranty Manufacturer warranty
Lifecycle status Phase-out announced by the manufacturer
EAN 4025515150503
ETIM class EC000357
eCl@ss 27050403

Interfaces 1

communication function No

Protection and monitoring 2

design of short-circuit protection Battery fuse 20 A/32 V (solid-state circuitry blade-type fuse + support)
design of the overload protection Valve control

Safety 2

operating resource protection class Class III
protection class IP IP00

Standards, specifications, approvals 3

certificate of suitability: CE marking Yes
certificate of suitability: UL approval Yes; cURus-Recognized (UL 1778, CSA C22.2 No. 107.1), File E219627
certificate of suitability: EAC approval Yes

Standards, specifications, approvals hazardous environments 1

certificate of suitability: ATEX No

Standards, specifications, approvals marine classification 3

shipbuilding approval Yes
Marine classification association: American Bureau of Shipping Europe Ltd. (ABS) Yes
Marine classification association: Det Norske Veritas (DNV) Yes

Standards, specifications, approvals Environmental Product Declaration 5

Environmental Product Declaration Yes
global warming potential [CO2 eq]: total 33.785 kg
global warming potential [CO2 eq]: during manufacturing 20.671 kg
global warming potential [CO2 eq]: during operation 9.7 kg
global warming potential [CO2 eq]: after end of life 0.812 kg

Ambient conditions 5

ambient condition For storage, mounting and operation of lead-acid batteries, the relevant DIN/VDE regulations or country-specific regulations (e.g. VDE 0510 Part 2/EN 50272-2) must be observed. You must ensure that the battery site is sufficiently ventilated. Possible sources of ignition must be at least 50 cm away.
ambient temperature: during operation -15 ... +50 °C
ambient temperature: during transport -20 ... +50 °C
ambient temperature: during storage -20 ... +50 °C
relative temporary capacity loss at 20 °C in a month typical 3%

Service life 6

service life of energy storage: typical capacity falls to 80 % of original capacity (according to EUROBAT)
service life of energy storage: at 20 °C typical 4 a
service life of energy storage: at 30 °C typical 2 a
service life of energy storage: at 40 °C typical 1 a
service life of energy storage: at 50 °C typical 0.5 a
note Along with the storage and operating temperature, other factors such as the duration of the storage period and the charge status during storage have a decisive influence on the possible useful life. Batteries should therefore be stored as briefly as possible, always fully charged, and within the temperature range 0 to +20 °C.

Connection method 2

type of electrical connection spring-loaded terminals
for UPS module 1 screw terminal each for 0.08 ... 4 mm2 for + BAT and - BAT

Mechanical data 7

width × height × depth of the enclosure 253 × 168 × 121 mm
installation width × mounting height 273 mm × 188 mm
fastening method can be screwed onto flat surface (keyhole mounting for hooking in to M4 screws)
DIN-rail mounting No
S7 rail mounting No
wall mounting Yes
number of cells 12

Accessories 1

product component included Accessories pack with solid-state circuitry fuse 20 A and 30 A

Additional information 1

other information Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)

Version Classification 3

eClass 16 27-05-04-03
ETIM 10 EC000357
UNSPSC 15 26-11-17-01

Logistics 6

Net weight 8.2 kg
Country of origin Austria
Shipping weight 9.2 kg
Ships from Türkiye
Dispatch —
Stock On request

Source: manufacturer data · Last verified: 01 Nov 2026

Documents

Documents for 6EP1935-6MF01

No documents are on file for this part yet.

Ask us for the datasheet
Certifications

Certifications and standards

  • CE
  • DNV
  • EAC
  • CE marking
  • EAC approval
  • shipbuilding approval
  • American Bureau of Shipping Europe Ltd. (ABS)
  • Det Norske Veritas (DNV)
  • Environmental Product Declaration
Quick answers

Questions about the Battery module

What is the rated current of Battery module?

The rated current of Battery module is 30 A.

What is the HS code of Battery module for customs?

The tariff (HS) code on file for Battery module is 85072080.

What is the EAN of Battery module?

The EAN (GTIN) of Battery module is 4025515150503.

Where does Battery module ship from, and how fast?

Battery module ships from Türkiye. Shipping calculated at checkout · import duties and taxes paid on arrival.

Guides

Guides for power supplies

All guides for power supplies
Reviews

Customer reviews

Series

Siemens SITOP battery

Brand
Siemens
Series
SITOP battery
Series page →
$252.54 On request
Get a Quote
Quote

Get a Quote

Battery module

Genuine parts

Genuine, factory-sealed parts

Siemens · 6EP1935-6MF01

Every part on Stoklink is new, unused and made by the manufacturer named on the page.

Condition
New and unused, in the manufacturer's factory-sealed packaging.
Sourced from
Siemens and its authorised distributors.
Warranty
The manufacturer's warranty applies.
If a part is not genuine
We refund the full amount.

Added to cart Could not add to cart

View cart