Main Components of a PLC System: Complete Guide for Engineers
Master PLC system components: CPU, power supply, I/O modules, communication interfaces, and software with sizing formulas and selection tips. Shop at Stoklink.
- Part number
- 6EP1336-3BA10
- Model no
- PSU8200
In stock · 25
Dispatch
Planned dispatch date. We aim to ship within 1 business day. Depending on warehouse workload it can take 2–3 business days.
· From Türkiye
0
- CE
SITOP PSU8200Siemens 6EP1336-3BA10 SITOP PSU8200 24V DC 20A Stabilized Power Supply
SITOP PSU8200 stabilized supply - 120-230V AC/110-220V DC in, 24V DC/20A out, 94% efficiency, DIN rail.
Description
About the PSU8200
About the PSU8200
The Siemens 6EP1336-3BA10 is a SITOP PSU8200 stabilized power supply that converts 120-230 V AC or 110-220 V DC input into a regulated 24 V DC output rated at 20 A. Efficiency is 94 percent, output voltage is adjustable from 24 to 28 V via potentiometer, and the unit snaps onto a 35 mm DIN rail for cabinet mounting.
Certifications & Standards
- CE
- UKCA
- EAC
- RCM
- SEMI F47
- CB
- Shipbuilding
- ABS
- DNV
- EPD
Selection Notes
The 20 A rating and 480 W typical output place this variant above the smaller PSU8200 models in the same family, sized for a fuller PLC rack plus I/O and sensor loads rather than a single controller. The 150 percent overload capability for up to 5 seconds per minute covers inrush from contactors or solenoids without oversizing the base rating. Wide-range AC/DC input (120-230 V AC or 110-220 V DC) lets one unit serve either a single-phase AC feed or a DC-fed cabinet without a separate input variant. The adjustable 24-28 V output compensates for cable voltage drop on long field runs to remote I/O.
Applications
Powering SIMATIC PLC racks, distributed I/O, and sensor/actuator loops in control cabinets fed from single-phase or two-phase AC or DC. The ABS and DNV marine classifications make it suitable for shipboard automation panels alongside standard industrial installations.
Specification
Full specification
General information 4
| product brand name | SITOP |
|---|---|
| product type designation | PSU8200 |
| product designation | Power supply SITOP modular |
| type of current supply | 24 V/20 A |
Input 22
| type of the power supply network | 1-phase and 2-phase AC or DC |
|---|---|
| phase number | 1 |
| voltage curve at input | AC/DC |
| supply voltage at AC: minimum rated value | 120 V |
| supply voltage at AC: maximum rated value | 230 V |
| supply voltage at AC: initial value | 85 V |
| supply voltage at AC: full-scale value | 275 V |
| supply voltage at AC | temperature derating necessary at Uin<100 V AC or DC at 50 °C; additional derating at Uin<100 V: Uin=95 V Pa max=460 W, Uin=90 V Pa max=440 W, Uin=85 V Pa max=420 W |
| supply voltage at DC | 110 ... 220 V |
| input voltage at DC | 88 ... 350 V |
| supply voltage: at 50 Hz | 230 V |
| supply voltage: at 60 Hz | 120 V |
| line frequency | 50/60 Hz |
| wide range input | Yes |
| buffering time for rated value of the output current in the event of power failure minimum | 20 ms |
| operating condition of the mains buffering | at Vin = 230 V |
| input current: at rated input voltage 120 V | 4.6 A |
| input current: at rated input voltage 230 V | 2.5 A |
| current limitation of inrush current at 25 °C maximum | 20 A |
| I2t value maximum | 5 A2·s |
| fuse protection type | Yes |
| fuse protection type in the feeder | Recommended miniature circuit breaker at 1-phase operation: 10 A characteristic C; required at 2-phase operation: circuit breaker 2-pole connected or circuit breaker 3RV2711-1HD10 (UL 489) at 120 V or 3RV2711- 1ED10 (UL 489) at 230 V |
Output 27
| voltage curve at output | Controlled, isolated DC voltage |
|---|---|
| product function output voltage controlled | Yes |
| product function output voltage stabilized | Yes |
| output voltage at DC rated value | 24 V |
| output voltage: at output 1 at DC rated value | 24 V |
| output voltage: at output 1 at DC | 24 V |
| output voltage adjustable | Yes; via potentiometer |
| adjustable output voltage | 24 ... 28 V |
| relative overall tolerance of the voltage | 3% |
| relative control precision of the output voltage: on slow fluctuation of input voltage | 0.1 % |
| residual ripple: maximum | 100 mV |
| residual ripple: typical | 80 mV |
| voltage peak: maximum | 200 mV |
| voltage peak: typical | 100 mV |
| display version for normal operation | Green LED for 24 V OK |
| type of signal at output | Relay contact (NO contact, rating 60 V DC/ 0.3 A) for "24 V OK" |
| behavior of the output voltage when switching on | No overshoot of Vout (soft start) |
| response delay maximum | 1.5 s |
| voltage increase time of the output voltage: typical | 250 ms |
| output current: rated value | 20 A |
| output current: rated range | 0 ... 20 A; +60 ... +70 °C: Derating 3%/K |
| supplied active power typical | 480 W |
| short-term overload current: at short-circuit during operation typical | 60 A |
| duration of overloading capability for excess current: at short-circuit during operation | 25 ms |
| constant overload current: on short-circuiting during the start-up typical | 30 A |
| bridging of equipment | Yes; switchable characteristic |
| number of parallel-switched equipment resources for increasing the power | 2 |
Show all 141 specifications ↓ Show less ↑88 more values in Identification, Efficiency, Closed-loop control, Protection and monitoring, Safety, EMC, Standards, specifications, approvals, Standards, specifications, approvals hazardous environments, Standards, specifications, approvals marine classification, Standards, specifications, approvals Environmental Product Declaration, Ambient conditions, Connection method, Mechanical data, Accessories, Additional information, ETIM 10 EC002540, Logistics.
Identification 10
| Part number | 6EP1336-3BA10 |
|---|---|
| Type designation | PSU8200 |
| Brand | Siemens |
| Condition | New, factory sealed |
| Source | Siemens and its authorised distributors |
| Warranty | Manufacturer warranty |
| Lifecycle status | Active, in production |
| EAN | 4025515152583 |
| ETIM class | EC002540 |
| eCl@ss | 27040701 |
Efficiency 2
| efficiency in percent | 94 % |
|---|---|
| power loss [W]: at rated output voltage for rated value of the output current typical | 31 W |
Closed-loop control 5
| relative control precision of the output voltage with rapid fluctuation of the input voltage by +/- 15% typical | 0.5 % |
|---|---|
| relative control precision of the output voltage load step of resistive load 50/100/50 % typical | 1% |
| setting time: load step 50 to 100% typical | 1 ms |
| setting time: load step 100 to 50% typical | 1 ms |
| setting time: maximum | 5 ms |
Protection and monitoring 7
| design of the overvoltage protection | < 31.8 V |
|---|---|
| property of the output short-circuit proof | Yes |
| design of short-circuit protection | Alternatively, constant current characteristic approx. 21.5 A or latching shutdown |
| typical | 21.5 A |
| overcurrent overload capability: in normal operation | overload capability 150 % Iout rated up to 5 s/min |
| enduring short circuit current RMS value: typical | 21.5 A |
| display version for overload and short circuit | LED yellow for "overload", LED red for "latching shutdown" |
Safety 6
| galvanic isolation between input and output | Yes |
|---|---|
| galvanic isolation | Output voltage: SELV, ES1 (IEC 62368-1), DVC As (IEC 61204-7) |
| operating resource protection class | Class I |
| leakage current: maximum | 3.5 mA |
| leakage current: typical | 1 mA |
| protection class IP | IP20 |
EMC 3
| standard: for emitted interference | EN 55022 Class B |
|---|---|
| standard: for mains harmonics limitation | EN 61000-3-2 |
| standard: for interference immunity | EN 61000-6-2 |
Standards, specifications, approvals 10
| certificate of suitability: CE marking | Yes |
|---|---|
| certificate of suitability: UL approval | Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259 |
| certificate of suitability: UKCA marking | Yes |
| certificate of suitability: EAC approval | Yes |
| certificate of suitability: Regulatory Compliance Mark (RCM) | Yes |
| certificate of suitability: NEC Class 2 | No |
| certificate of suitability: SEMI F47 | Yes |
| type of certification: BIS | Yes; R-41183539 |
| type of certification: CB-certificate | Yes |
| MTBF at 40 °C | 583 500 h |
Standards, specifications, approvals hazardous environments 4
| certificate of suitability: IECEx | No |
|---|---|
| certificate of suitability: ATEX | No |
| certificate of suitability: ULhazloc approval | No |
| certificate of suitability: FM registration | No |
Standards, specifications, approvals marine classification 5
| shipbuilding approval | Yes |
|---|---|
| Marine classification association: American Bureau of Shipping Europe Ltd. (ABS) | Yes |
| Marine classification association: French marine classification society (BV) | No |
| Marine classification association: Det Norske Veritas (DNV) | Yes |
| Marine classification association: Lloyds Register of Shipping (LRS) | No |
Standards, specifications, approvals Environmental Product Declaration 5
| Environmental Product Declaration | Yes |
|---|---|
| global warming potential [CO2 eq]: total | 814.3 kg |
| global warming potential [CO2 eq]: during manufacturing | 28.7 kg |
| global warming potential [CO2 eq]: during operation | 785 kg |
| global warming potential [CO2 eq]: after end of life | 0.24 kg |
Ambient conditions 4
| ambient temperature: during operation | -25 ... +70 °C; With natural convection; startup tested starting from -40 °C nominal voltage |
|---|---|
| ambient temperature: during transport | -40 ... +85 °C |
| ambient temperature: during storage | -40 ... +85 °C |
| environmental category according to IEC 60721 | Climate class 3K3, 5 ... 95% no condensation |
Connection method 4
| type of electrical connection | screw terminal |
|---|---|
| at input | L, N, PE: 1 screw terminal each for 0.2 ... 4 mm2 single-core/finely stranded |
| at output | +, -: 2 screw terminals each for 0.2 ... 4 mm2 |
| for auxiliary contacts | 13, 14 (alarm signal), 15, 16 (Remote ON OFF): 1 screw terminal each for 0.14 ... 1.5 mm2 |
Mechanical data 11
| width × height × depth of the enclosure | 90 × 125 × 125 mm |
|---|---|
| installation width × mounting height | 90 mm × 225 mm |
| required spacing: top | 50 mm |
| required spacing: bottom | 50 mm |
| required spacing: left | 0 mm |
| required spacing: right | 0 mm |
| fastening method | Snaps onto DIN rail EN 60715 35x7.5/15 |
| DIN-rail mounting | Yes |
| S7 rail mounting | No |
| wall mounting | No |
| housing can be lined up | Yes |
Accessories 2
| electrical accessories | Buffer module |
|---|---|
| mechanical accessories | Device identification label 20 mm × 7 mm, TI-grey 3RT2900-1SB20 |
Additional information 1
| other information | Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified) |
|---|
ETIM 10 EC002540 3
| ETIM | 9 EC002540 |
|---|---|
| IDEA | 4 4130 |
| UNSPSC | 15 39-12-10-04 |
Logistics 6
| Net weight | 1.06 kg |
|---|---|
| Country of origin | Romania |
| Shipping weight | 1.56 kg |
| Ships from | Türkiye |
| Dispatch | 13 Nov |
| Stock | In stock |
Source: manufacturer data · Last verified: 01 Nov 2026
Documents
Documents for 6EP1336-3BA10
No documents are on file for this part yet.
Ask us for the datasheet
Certifications
Certifications and standards
- CE
- CE marking
- UKCA marking
- EAC approval
- Regulatory Compliance Mark (RCM)
- SEMI F47
- CB-certificate
- shipbuilding approval
- American Bureau of Shipping Europe Ltd. (ABS)
- Det Norske Veritas (DNV)
- Environmental Product Declaration
Quick answers
Questions about the PSU8200
What is the rated current of PSU8200?
The rated current of PSU8200 is 20 A.
Which supply voltage is PSU8200 rated for?
The rated operational voltage of PSU8200 is 120–230 V AC.
What motor power is PSU8200 rated for?
The rated motor power of PSU8200 is 0.48 kW.
What is the HS code of PSU8200 for customs?
The tariff (HS) code on file for PSU8200 is 85044083.
What is the EAN of PSU8200?
The EAN (GTIN) of PSU8200 is 4025515152583.
Where does PSU8200 ship from, and how fast?
PSU8200 ships from Türkiye. Shipping calculated at checkout · import duties and taxes paid on arrival. Stock items are dispatched within 1–2 business days.
Guides
Guides for power supplies
Reviews
Customer reviews
Series
Siemens SITOP PSU8200
- Brand
- Siemens
- Series
- SITOP PSU8200
