Main Components of a PLC System: Complete Guide for Engineers
Master PLC system components: CPU, power supply, I/O modules, communication interfaces, and software with sizing formulas and selection tips. Shop at Stoklink.
- Part number
- 6EP1332-5BA10
- Model no
- PSU100C
Low stock
Dispatch
Planned dispatch date. We aim to ship within 1 business day. Depending on warehouse workload it can take 2–3 business days.
· From Türkiye
0
- CE
- EAC
SITOP PSU100CSiemens 6EP1332-5BA10 SITOP PSU100C 24V/4A DIN-Rail Power Supply
SITOP PSU100C power supply, 100-230V AC/110-300V DC in, 24V DC/4A out, IP20, DIN-rail.
Description
About the PSU100C
About the PSU100C
The Siemens SITOP PSU100C (6EP1332-5BA10) is a stabilized DIN-rail power supply converting 100-230 V AC (or 110-300 V DC) input to a regulated 24 V DC / 4 A output, adjustable 22.2-26.4 V via potentiometer. It reaches 88% efficiency, tolerates a 34 A inrush current, and carries a CE mark plus cULus and EAC approvals in an IP20 enclosure.
Certifications & Standards
- CE
- EAC
- CB
- shipbuilding
Selection Notes
The 100-230 V AC / 110-300 V DC dual-rated input means this unit runs unchanged on either an AC mains feed or a DC control-voltage bus, which matters on panels where a common DC backbone feeds multiple loads. A 4 A / 96 W rating sits at the lower end of the PSU100C range; loads approaching or exceeding that figure need the next current step rather than paralleling units casually, though up to 2 units can be paralleled per the datasheet for redundancy or added capacity. The output remains adjustable 22.2-26.4 V through a potentiometer, useful for compensating voltage drop on long DC field-wiring runs. Marine classification (ABS, DNV) extends its use onto ship and offshore panels beyond standard industrial installations.
Applications
24 V DC control-cabinet power for PLCs, I/O, sensors, and contactor coils on general industrial panels, including marine and offshore installations where ABS/DNV classification is required.
Specification
Full specification
General information 4
| product brand name | SITOP |
|---|---|
| product type designation | PSU100C |
| product designation | Power supply SITOP PSU100C |
| type of current supply | 24 V/4 A |
Input 21
| type of the power supply network | 1-phase AC or DC |
|---|---|
| phase number | 1 |
| voltage curve at input | AC/DC |
| supply voltage at AC: minimum rated value | 100 V |
| supply voltage at AC: maximum rated value | 230 V |
| supply voltage at AC: initial value | 85 V |
| supply voltage at AC: full-scale value | 264 V |
| input voltage at DC | 110 ... 300 V |
| supply voltage: at 50 Hz | 230 V |
| supply voltage: at 60 Hz | 100 V |
| line frequency | 50/60 Hz |
| wide range input | Yes |
| overvoltage overload capability | 2.3 × Vin rated, 1.3 ms |
| buffering time for rated value of the output current in the event of power failure minimum | 20 ms |
| operating condition of the mains buffering | at Vin = 230 V |
| input current: at rated input voltage 100 V | 2.25 A |
| input current: at rated input voltage 230 V | 1.15 A |
| current limitation of inrush current at 25 °C maximum | 34 A |
| I2t value maximum | 3 A2·s |
| fuse protection type | internal |
| fuse protection type in the feeder | Recommended miniature circuit breaker: from 16 A characteristic B or from 10 A characteristic C |
Output 23
| voltage curve at output | Controlled, isolated DC voltage |
|---|---|
| product function output voltage controlled | Yes |
| product function output voltage stabilized | Yes |
| output voltage at DC rated value | 24 V |
| output voltage: at output 1 at DC rated value | 24 V |
| output voltage: at output 1 at DC | 24 V |
| output voltage adjustable | Yes; via potentiometer |
| adjustable output voltage | 22.2 ... 26.4 V |
| relative overall tolerance of the voltage | 3% |
| relative control precision of the output voltage: on slow fluctuation of input voltage | 0.1 % |
| residual ripple: maximum | 200 mV |
| residual ripple: typical | 80 mV |
| voltage peak: maximum | 300 mV |
| voltage peak: typical | 80 mV |
| display version for normal operation | Green LED for output voltage OK |
| behavior of the output voltage when switching on | Overshoot of Vout approx. 1 % |
| response delay maximum | 1.5 s |
| voltage increase time of the output voltage: typical | 400 ms |
| output current: rated value | 4 A |
| output current: rated range | 0 ... 4 A; +55 ... +70 °C: Derating 3%/K; at +70 °C Iout rated 2.2 A |
| supplied active power typical | 96 W |
| bridging of equipment | Yes; Start-up with single nominal load only |
| number of parallel-switched equipment resources for increasing the power | 2 |
Show all 126 specifications ↓ Show less ↑78 more values in Identification, Efficiency, Closed-loop control, Protection and monitoring, Safety, EMC, Standards, specifications, approvals, Standards, specifications, approvals hazardous environments, Standards, specifications, approvals marine classification, Standards, specifications, approvals Environmental Product Declaration, Ambient conditions, Connection method, Mechanical data, Accessories, Additional information, Approvals Certificates, Logistics.
Identification 10
| Part number | 6EP1332-5BA10 |
|---|---|
| Type designation | PSU100C |
| Brand | Siemens |
| Condition | New, factory sealed |
| Source | Siemens and its authorised distributors |
| Warranty | Manufacturer warranty |
| Lifecycle status | Active, in production |
| EAN | 4025515152620 |
| ETIM class | EC002540 |
| eCl@ss | 27040701 |
Efficiency 3
| efficiency in percent | 88 % |
|---|---|
| power loss [W]: at rated output voltage for rated value of the output current typical | 13 W |
| power loss [W]: during no-load operation maximum | 0.75 W |
Closed-loop control 4
| relative control precision of the output voltage with rapid fluctuation of the input voltage by +/- 15% typical | 0.1 % |
|---|---|
| relative control precision of the output voltage at load step of resistive load 10/90/10 % typical | 3% |
| setting time: load step 10 to 90% typical | 4 ms |
| setting time: load step 90 to 10% typical | 4 ms |
Protection and monitoring 4
| design of the overvoltage protection | < 60 V |
|---|---|
| property of the output short-circuit proof | Yes |
| design of short-circuit protection | Electronic shutdown, automatic restart |
| typical | 4.8 A |
Safety 6
| galvanic isolation between input and output | Yes |
|---|---|
| galvanic isolation | Output voltage: SELV, ES1 (IEC 62368-1), DVC As (IEC 61204-7) |
| operating resource protection class | Class I |
| leakage current: maximum | 3.5 mA |
| leakage current: typical | 0.4 mA |
| protection class IP | IP20 |
EMC 3
| standard: for emitted interference | EN 55022 Class B |
|---|---|
| standard: for mains harmonics limitation | EN 61000-3-2 |
| standard: for interference immunity | EN 61000-6-2 |
Standards, specifications, approvals 6
| certificate of suitability: CE marking | Yes |
|---|---|
| certificate of suitability: UL approval | Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259 |
| certificate of suitability: EAC approval | Yes |
| certificate of suitability: NEC Class 2 | No |
| type of certification: CB-certificate | Yes |
| MTBF at 40 °C | 2 726 727 h |
Standards, specifications, approvals hazardous environments 4
| certificate of suitability: IECEx | No |
|---|---|
| certificate of suitability: ATEX | No |
| certificate of suitability: ULhazloc approval | No |
| certificate of suitability: FM registration | No |
Standards, specifications, approvals marine classification 5
| shipbuilding approval | Yes |
|---|---|
| Marine classification association: American Bureau of Shipping Europe Ltd. (ABS) | Yes |
| Marine classification association: French marine classification society (BV) | No |
| Marine classification association: Det Norske Veritas (DNV) | Yes |
| Marine classification association: Lloyds Register of Shipping (LRS) | No |
Standards, specifications, approvals Environmental Product Declaration 5
| Environmental Product Declaration | Yes |
|---|---|
| global warming potential [CO2 eq]: total | 389.3 kg |
| global warming potential [CO2 eq]: during manufacturing | 6 kg |
| global warming potential [CO2 eq]: during operation | 382.9 kg |
| global warming potential [CO2 eq]: after end of life | 0.22 kg |
Ambient conditions 4
| ambient temperature: during operation | -20 ... +70 °C; with natural convection |
|---|---|
| ambient temperature: during transport | -40 ... +85 °C |
| ambient temperature: during storage | -40 ... +85 °C |
| environmental category according to IEC 60721 | Climate class 3K3, 5 ... 95% no condensation |
Connection method 4
| type of electrical connection | screw terminal |
|---|---|
| at input | L, N, PE: Removable screw terminal, each for 1 x 0.5 ... 2.5 mm2 |
| at output | +: 1 screw terminal for 0.5 ... 2.5 mm2; -: 2 screw terminals for 0.5 ... 2.5 mm2 |
| for auxiliary contacts | - |
Mechanical data 11
| width × height × depth of the enclosure | 52.5 × 80 × 100 mm |
|---|---|
| installation width × mounting height | 52.5 mm × 180 mm |
| required spacing: top | 50 mm |
| required spacing: bottom | 50 mm |
| required spacing: left | 0 mm |
| required spacing: right | 0 mm |
| fastening method | Snaps onto DIN rail EN 60715 35x7.5/15 |
| DIN-rail mounting | Yes |
| S7 rail mounting | No |
| wall mounting | No |
| housing can be lined up | Yes |
Accessories 1
| electrical accessories | Removable spring-type terminal 6EP1971-5BA00 |
|---|
Additional information 1
| other information | Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified) |
|---|
Approvals Certificates 1
| Environmental Product Declaration: global warming potential [CO2 eq] / during manufacturing | 6 kg |
|---|
Logistics 6
| Net weight | 0.32 kg |
|---|---|
| Country of origin | Romania |
| Shipping weight | 0.82 kg |
| Ships from | Türkiye |
| Dispatch | 16 Nov |
| Stock | Low stock |
Source: manufacturer data · Last verified: 01 Nov 2026
Documents
Documents for 6EP1332-5BA10
No documents are on file for this part yet.
Ask us for the datasheet
Certifications
Certifications and standards
- CE
- EAC
- CE marking
- EAC approval
- CB-certificate
- shipbuilding approval
- American Bureau of Shipping Europe Ltd. (ABS)
- Det Norske Veritas (DNV)
- Environmental Product Declaration
Quick answers
Questions about the PSU100C
What is the rated current of PSU100C?
The rated current of PSU100C is 4 A.
Which supply voltage is PSU100C rated for?
The rated operational voltage of PSU100C is 100–230 V AC.
What motor power is PSU100C rated for?
The rated motor power of PSU100C is 13 W kW.
What is the HS code of PSU100C for customs?
The tariff (HS) code on file for PSU100C is 85044083.
What is the EAN of PSU100C?
The EAN (GTIN) of PSU100C is 4025515152620.
Where does PSU100C ship from, and how fast?
PSU100C ships from Türkiye. Shipping calculated at checkout · import duties and taxes paid on arrival. Stock items are dispatched within 1–2 business days.
Guides
Guides for power supplies
Reviews
Customer reviews
Series
Siemens SITOP PSU100C
- Brand
- Siemens
- Series
- SITOP PSU100C
