- Home
- All Products
- Schneider Electric ZB5RTA331 Harmony XB5R Wireless Push Button Green 22 mm Marked I Push Button Schneider Electric ZB5RTA331 Harmony XB5R Wireless Push Button Green 22 mm Marked I Push Button
Schneider Electric ZB5RTA331 Harmony XB5R Wireless Push Button Green 22 mm Marked I Push Button
Schneider Electric ZB5RTA331 Harmony XB5R Wireless Push Button Green 22 mm Marked I Push Button
Get Quote
- Description
The Schneider Electric ZB5RTA331 is a Harmony XB5R wireless and batteryless push button: a green 22 mm spring-return head with a built-in Zigbee Green Power transmitter, needing no wiring and no battery. Pressing it sends a radio frame up to 100 m to a Harmony receiver such as ZBRRA or ZBRRC.
Technical Specifications
| Reference | ZB5RTA331 |
| Brand | Schneider Electric |
| Range of Product | Harmony XB5 |
| GTIN | 3606480334603 |
| Product or Component Type | Wireless and batteryless transmitter |
| Device short name | XB5R |
| Bezel material | Dark grey plastic |
| Mounting diameter | 22 mm |
| Type of operator | Spring return push-button with transmitter |
| Operator profile | Green flush, I white |
| Communication port protocol | Zigbee Green Power 2.4 GHz (IEEE 802.15.4) |
| Transmission frequency | 2405 MHz |
| Number of channels | 16 |
| Emission power | 3 mW |
| Maximum sensing distance | 100 m free field; up to 300 m with relay antenna ZBRA1 |
| Response time | < 2 ms |
| Overall dimensions (W x H x D) | 30 x 41.5 x 43 mm |
| Net weight | 0.045 kg |
| IP degree of protection | IP66 / IP67 / IP69 / IP69K (front face) |
| Ambient air temperature, operation | -40...70 °C |
| Mechanical durability | Free fall resistance 1000 mm (IEC 60068-2-32) |
Certifications & Standards
- IEC 60947-1
- IEC 60947-5-1
- UL 508
- CSA C22.2 No 14
- GOST
- C-tick
- BT 2006/95/EC
Selection Notes
Because it is energy-harvesting (the button press itself powers the radio frame), this device needs no cable run and no battery replacement — useful for mobile equipment, rotating machinery or retrofits where pulling wire is impractical. The I marking identifies it for the corresponding function in a two-button station. Pair it with a ZBRRA or ZBRRC receiver (and a ZBRA1 relay antenna if the run exceeds 100 m) to complete the control loop.