- Part number
- RXM4LB1BD
Description
About the RXM4LB1BD
About the RXM4LB1BD
The Schneider Electric RXM4LB1BD is a Harmony RXM series miniature plug-in relay with 4 C/O contacts and a 24 V DC coil, rated 3 A (NO contacts) at up to 250 V AC or 28 V DC. It has no status LED and no lockable test button, giving a compact faston-pin relay for socket-mounted control-panel switching applications.
Certifications & Standards
- CE
- IEC 61810-1
- UL 508
Selection Notes
The 24 V DC coil suits panels standardized on low-voltage DC control power rather than mains-referenced AC coils. With 4 C/O contacts, one relay switches four independent circuits from a single input signal, useful for interposing a low-power PLC output to several higher-current loads. The 3 A / 250 V AC rated operational current on the NO contacts covers typical pilot-lamp and small-coil switching duties; the NC contacts carry less, at 1.5 A. This variant has no status LED and no lockable test button - pick an LED-equipped version when a visual coil-energized indication is needed at the panel.
Specification
Full specification
Main 7
| Range of product | Harmony Electromechanical Relays |
|---|---|
| Series name | RXM series |
| Product or component type | Plug-in relay |
| Relay type | Miniature relay |
| Contacts type and composition | 4 C/O |
| [Uc] control circuit voltage | 24 V DC |
| [Ithe] conventional enclosed thermal current | 3 A at -40…55 °C |
Complementary 28
| status LED | Without |
|---|---|
| Control type | Without lockable test button |
| [Ie] rated operational current | 1.5 A at 28 V (DC) NC conforming to IEC, 1.5 A at 250 V (AC) NC conforming to IEC, 3 A at 28 V (DC) NO conforming to IEC, 3 A at 250 V (AC) NO conforming to IEC, 3 A at 24 V (DC) NO conforming to IEC, 3 A at 220 V (AC) NO conforming to IEC, 3 A at 28 V (DC) conforming to UL, 3 A at 250 V (AC) conforming to UL |
| Minimum switching capacity | 25 mW subject to switching frequency, environment or expected reliability level etc |
| Rated operational voltage limits | 19.2...26.4 V DC |
| [Ui] rated insulation voltage | 250 V conforming to IEC |
| Maximum switching voltage | 250 V AC, 28 V DC |
| Drop-out voltage threshold | >= 0.1 Uc DC |
| Load current | 3 A at 250 V AC, 3 A at 28 V DC |
| Maximum switching capacity | 750 VA AC, 84 W DC |
| Minimum switching current | 5 mA subject to switching frequency, environment or expected reliability level etc |
| Minimum switching voltage | 5 V subject to switching frequency, environment or expected reliability level etc |
| Average resistance | 640 Ohm at 23 °C +/- 10 % |
| Average coil consumption | 0.9 W, DC |
| Mechanical durability | 20000000 cycles |
| Electrical durability | 200000 cycles resistive load 23 °C, 100000 cycles resistive load at 55 °C |
| Safety reliability data | B10d = 100000 |
| Operating rate | <= 1200 cycles/hour under load, <= 18000 cycles/hour no-load |
| Utilisation coefficient | 20 % |
| Dielectric strength | 2000 V AC between coil and contact with basic insulation, 2000 V AC between poles with basic insulation, 1000 V AC between contacts with micro disconnection |
| Protection category | RT I |
| Pollution degree | 2 |
| Operating position | Any position |
| Test levels | Level A group mounting |
| Sale per indivisible quantity | 10 |
| Contacts material | Silver alloy (Ag/Ni) |
| Shape of pin | Flat (faston type) |
| Net weight | 0.033 kg |
Environment 4
| Standards | CE, IEC 61810-1 (iss. 2), UL 508 |
|---|---|
| Ambient air temperature for storage | -40…85 °C |
| Vibration resistance | 3 gn, amplitude = +/- 1 mm (f = 10…50 Hz)operating conforming to IEC 60068-2-6, 6 gn, amplitude = +/- 1 mm (f = 10…50 Hz)not operating conforming to IEC 60068-2-6 |
| Shock resistance | 30 gn for not operating conforming to IEC 60068-2-27, 10 gn for in operation conforming to IEC 60068-2-27 |
Show all 68 specifications ↓ Show less ↑29 more values in Identification, Contractual warranty, Logistics.
Identification 6
| Part number | RXM4LB1BD |
|---|---|
| Brand | Schneider Electric |
| Condition | New, factory sealed |
| Source | Schneider Electric and its authorised distributors |
| Warranty | Manufacturer warranty |
| Lifecycle status | Active, in production |
Contractual warranty 1
| Warranty (in months) | 18 |
|---|
Logistics 22
| Unit Type of Package 1 | PCE |
|---|---|
| Number of Units in Package 1 | 1 |
| Package 1 Height | 2.2 cm |
| Package 1 Width | 2.9 cm |
| Package 1 Length | 4.8 cm |
| Package 1 Weight | 34.0 g |
| Unit Type of Package 2 | BB1 |
| Number of Units in Package 2 | 10 |
| Package 2 Height | 3.1 cm |
| Package 2 Width | 11.2 cm |
| Package 2 Length | 13.6 cm |
| Package 2 Weight | 361.0 g |
| Unit Type of Package 3 | S02 |
| Number of Units in Package 3 | 270 |
| Package 3 Height | 15.0 cm |
| Package 3 Width | 30.0 cm |
| Package 3 Length | 40.0 cm |
| Package 3 Weight | 10.65 kg |
| Shipping weight | 0.033 kg |
| Ships from | Türkiye |
| Dispatch | — |
| Stock | On request |
Source: manufacturer data · Last verified: 30 Oct 2026
Documents
Documents for RXM4LB1BD
No documents are on file for this part yet.
Ask us for the datasheet
Certifications
Certifications and standards
- CE
- IEC 61810-1 (iss. 2)
- UL 508
Quick answers
Questions about the RXM4LB1BD
What is the rated current of RXM4LB1BD?
The rated current of RXM4LB1BD is 3 A.
What is the HS code of RXM4LB1BD for customs?
The tariff (HS) code on file for RXM4LB1BD is 85364900.
Where does RXM4LB1BD ship from, and how fast?
RXM4LB1BD ships from Türkiye. Shipping calculated at checkout · import duties and taxes paid on arrival.
Reviews
Customer reviews
Series
Schneider Electric Harmony Electromechanical Relays
- Brand
- Schneider Electric
- Series
- Harmony Electromechanical Relays