Schneider Electric RSL1PVJU Harmony RSL 6A 1CO 12V AC/DC Slim Interface Relay

The Schneider Electric RSL1PVJU is a Harmony RSL series slim interface relay pre-assembled with its socket, switching a single C/O contact rated 6 A from a 12 V AC/DC control coil. At just 6.2 mm wide, it is built to save DIN-rail space, and a status LED shows the relay state at a glance.

Technical Specifications

Certifications & Standards

• CE
• UL
• GOST
• CSA
• CSA C22.2 No 14
• UL 508
• IEC 61810-1

Selection Notes

The 12 V AC/DC coil on the RSL1PVJU accepts either supply without a separate DC-only or AC-only variant, which matters in cabinets driven from 12 V control transformers or low-voltage DC control buses rather than 110 V. Because it ships pre-assembled with its socket, there is no separate relay-plus-socket part number to specify, and the 6.2 mm width lets several sit side by side on a terminal strip. Operating range tops out at 55°C rather than the wider range some coil-voltage options in the RSL family support, so check ambient headroom in warm enclosures. At 6 A/250 V AC, size it for signal and small-contactor-coil switching, not motor-duty loads.