Schneider Electric RSL1PVFU Harmony RSL 6A 1CO 110V AC/DC Slim Interface Relay

The Schneider Electric RSL1PVFU is a Harmony RSL series slim interface relay pre-assembled with its socket, switching a single C/O contact rated 6 A from a 110 V AC/DC control coil. At just 6.2 mm wide, it is built to save DIN-rail space, and a status LED shows the relay state at a glance.

Technical Specifications

Certifications & Standards

• CE
• CSA
• UL
• GOST
• IEC 61810-1
• UL 508
• CSA C22.2 No 14

Selection Notes

Because the RSL1PVFU ships pre-assembled with its socket, there is no separate relay-plus-socket part number to specify or stock, and the 6.2 mm width is what lets several sit side by side on a terminal strip without eating the DIN-rail run a standard-width interface relay would need. The 110 V AC/DC coil accepts either supply without a separate DC-only or AC-only variant, which matters where a cabinet mixes 110 V control transformers with DC I/O racks. The status LED gives a visual state check without opening the terminal cover, useful on cabinets with limited test-point access. At 6 A/250 V AC, size it for signal and small-contactor-coil switching, not motor-duty loads.