Part number
ATS22D62S6
$886.74 On request Dispatch — · From TürkiyeGet a Quote
Manufacturer phase-out

Schneider Electric has announced the end of ATS22D62S6

Last orders until 31 Mar 2027. After that date, supply depends on remaining stock. Date announced by Schneider Electric for Türkiye, where we source this part.

No replacement announced yet. Tell us the application and we will propose an alternative.

ATS22D62S6, Altistart 22 Series Soft Starter, 30 kW, 62 A, 230 to 600V AC

Rated current
62 A
Rated operational voltage
230–600 V AC
Motor power
30 kW
Control voltage
110–250 V
Poles
3P
Communication
Modbus RTU
EAN
3606480167300
Description

About the ATS22D62S6

Schneider Electric ATS22 Soft Starter Series – Overview

Schneider Electric ATS22 soft starters are compact and reliable motor starting solutions designed for smooth acceleration and deceleration of asynchronous motors in standard industrial applications. The ATS22 series focuses on reducing mechanical stress, limiting starting current, and simplifying motor starting without advanced digital control requirements. With a proven design and straightforward configuration, ATS22 soft starters are commonly used for pumps, fans, compressors, conveyors, and general-purpose machinery where controlled motor starting is required.


Product Description: ATS22D62S6

The Schneider ATS22D62S6 is an Altistart 22 motor soft starter rated for a nominal operational current of 62 A (at 40 °C) and designed to control three-phase asynchronous motors. Its motor power ratings are specified as 15 kW at 230 V and 30 kW at 400 V, making it suitable for small to medium industrial motors in the indicated voltage classes. The ATS22D62S6 supports supply voltages across the 230–600 V range and offers torque-control (current-limited) starting to reduce mechanical stress and limit inrush current during motor acceleration. Typical applications include pumps, fans, compressors and conveyors where a controlled start/stop and reduced mechanical wear are required. Standout, verified features for this SKU include an internal bypass switch to reduce heat and losses after start, integrated motor overload protection with PTC input support, and compatibility with configuration tools and communications (Modbus / serial interface) for faster setup and diagnostics.

Specification

Full specification

73 values · Last verified 30 Oct 2026

Main 14

Range of Product Altistart 22
Product or Component Type Soft starter
Product destination Asynchronous motors
Product Specific Application Pumps and fans
Component name ATS22
Phase 3 phase
[Us] rated supply voltage 230...600 V - 15...10 %
Motor power kW 15 kW 230 V, 30 kW 400 V, 30 kW 440 V, 37 kW 500 V
Factory setting current 52 A
Power dissipation in W 59 W for standard applications
Utilisation category AC-53A
Type of start Start with torque control (current limited to 3.5 In)
IcL starter rating 62 A connection in the motor supply line for standard applications
IP Degree of Protection IP20

Complementary 34

Assembly style With heat sink
Function Available Internal bypass
Supply voltage limits 195…660 V
Supply frequency 50...60 Hz - 10...10 %
Network Frequency 45...66 Hz
Device connection In the motor supply line
[Uc] control circuit voltage 230 V - 15...10 % 50/60 Hz
Control circuit consumption 20 W
Discrete output number 2
Discrete output type Relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O, Relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
Minimum switching current 100 mA 12 V DC relay outputs)
Maximum switching current 5 A 250 V AC resistive 1 relay outputs, 5 A 30 V DC resistive 1 relay outputs, 2 A 250 V AC inductive 0.4 20 ms relay outputs, 2 A 30 V DC inductive 7 ms relay outputs
Discrete input number 3
Discrete input type LI1, LI2, LI3) logic, 5 mA 4.3 kOhm
Discrete input voltage 24 V <= 30 V
Discrete input logic Positive logic LI1, LI2, LI3 11 V, >= 5 mA
Output current 0.4...1 Icl adjustable
PTC probe input 750 Ohm
Communication Port Protocol Modbus
Connector Type 1 RJ45
Communication data link Serial
Physical interface RS485 multidrop
Transmission Rate 4800, 9600 or 19200 bps
Installed device 31
Protection type Phase failure line, Thermal protection motor, Thermal protection starter
Marking CE
Type of cooling Forced convection
Operating position Vertical +/- 10 degree
Height 11.6 in (295 mm)
Width 5.7 in (145 mm)
Depth 8.1 in (207 mm)
Net Weight 26.5 lb(US) (12 kg)
Motor power range AC-3 30…50 kW 480…500 V 3 phase, 15…25 kW 200…240 V 3 phase, 30…50 kW 380…440 V 3 phase
Motor starter type Soft starter

Environment 11

Electromagnetic compatibility Conducted and radiated emissions level A conforming to IEC 60947-4-2, Damped oscillating waves level 3 conforming to IEC 61000-4-12, Electrostatic discharge level 3 conforming to IEC 61000-4-2, Immunity to electrical transients level 4 conforming to IEC 61000-4-4, Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3, Voltage/current impulse level 3 conforming to IEC 61000-4-5
Standards IEC 60947-4-2
Product Certifications CCC, UL, CSA, GOST, C-tick
Vibration resistance 1 gn (f= 13…200 Hz) conforming to IEC 60068-2-6, 1.5 mm (f= 2…13 Hz) conforming to IEC 60068-2-6
Shock resistance 15 gn 11 ms IEC 60068-2-27
Noise level 45 dB
Pollution degree Level 2 IEC 60664-1
Relative humidity 0…95 % without condensation or dripping water IEC 60068-2-3
Ambient air temperature for operation 14…104 °F (-10…40 °C) (without derating), 104…140 °F (40…60 °C) (with current derating 2.2 % per °C)
Ambient Air Temperature for Storage -13…158 °F (-25…70 °C)
Operating altitude <= 3280.84 ft (1000 m) without derating, > 3280.84... 1000...< 2000 m) with current derating of 2.2 % per additional 100 m
Show all 73 specifications ↓ Show less ↑14 more values in Identification, Contractual warranty, Logistics.

Identification 8

Part number ATS22D62S6
Brand Schneider Electric
Condition New, factory sealed
Source Schneider Electric and its authorised distributors
Warranty Manufacturer warranty
Lifecycle status Phase-out announced by the manufacturer
Last order date 31 Mar 2027 · as announced for Türkiye, our sourcing market
EAN 3606480167300

Contractual warranty 1

Warranty (in months) 18

Logistics 5

Country of origin FR
Shipping weight 12.0 kg
Ships from Türkiye
Dispatch —
Stock On request

Source: manufacturer data · Last verified: 30 Oct 2026

Documents

Documents for ATS22D62S6

No documents are on file for this part yet.

Ask us for the datasheet
Certifications

Certifications and standards

  • UL
  • CSA
  • CCC
  • IEC 60947-4-2
Quick answers

Questions about the ATS22D62S6

What is the rated current of ATS22D62S6?

The rated current of ATS22D62S6 is 62 A.

Which supply voltage is ATS22D62S6 rated for?

The rated operational voltage of ATS22D62S6 is 230–600 V AC.

What motor power is ATS22D62S6 rated for?

The rated motor power of ATS22D62S6 is 30 kW.

Which control voltage does ATS22D62S6 need?

The control voltage range of ATS22D62S6 is 110–250 V.

What is the HS code of ATS22D62S6 for customs?

The tariff (HS) code on file for ATS22D62S6 is 853710.

What is the EAN of ATS22D62S6?

The EAN (GTIN) of ATS22D62S6 is 3606480167300.

Where does ATS22D62S6 ship from, and how fast?

ATS22D62S6 ships from Türkiye. Shipping calculated at checkout · import duties and taxes paid on arrival.

Guides

Guides for soft starters

All guides for soft starters
Reviews

Customer reviews

Series

Schneider Electric ATS22

Brand
Schneider Electric
Series
ATS22
Series page →
Series

Other series in Schneider Altistart Soft Starters

$886.74 On request
Get a Quote
Quote

Get a Quote

Genuine parts

Genuine, factory-sealed parts

Schneider Electric · ATS22D62S6

Every part on Stoklink is new, unused and made by the manufacturer named on the page.

Condition
New and unused, in the manufacturer's factory-sealed packaging.
Sourced from
Schneider Electric and its authorised distributors.
Warranty
The manufacturer's warranty applies.
If a part is not genuine
We refund the full amount.

Added to cart Could not add to cart

View cart