Main Components of a PLC System: Complete Guide for Engineers
Master PLC system components: CPU, power supply, I/O modules, communication interfaces, and software with sizing formulas and selection tips. Shop at Stoklink.
- Part number
- 6EP1961-2BA11
- Model no
- PSE200U
Critical stock
Dispatch
Planned dispatch date. We aim to ship within 1 business day. Depending on warehouse workload it can take 2–3 business days.
· From Türkiye
0
Siemens 6EP1961-2BA11 SITOP PSE200U 4x0.5-3A 24V Selectivity Module
Siemens SITOP PSE200U selectivity module, 6EP1961-2BA11, 4x0.5-3A adjustable, 24V/12A input, marine approved.
Description
About the PSE200U
About the PSE200U
The Siemens SITOP PSE200U 6EP1961-2BA11 is a 4-channel selectivity module for 24 V DC systems, taking a 12 A input and splitting it across four outputs each adjustable from 0.5 to 3 A, with a common signaling contact for remote status. It isolates an overloaded branch circuit while the other three channels stay powered.
Certifications & Standards
- CE
- UKCA
- EAC
- CB
- Shipbuilding
- ABS
- DNV
- EPD
Selection Notes
The 0.5-3 A adjustable threshold per channel and 12 A input current size this module for lower-current 24 V branch circuits than the higher-current 4x10A selectivity modules in the same family; pick this variant when individual branch loads stay under 3 A. The non-isolated 24 V remote reset input lets a PLC clear a tripped channel without manual intervention at the cabinet, and the marine classification approvals (ABS, DNV) make it a fit for shipboard control panels where the plain diagnostics module is not certified.
Applications
Protects multiple independent 24 V DC branch circuits - sensors, small valve solenoids, remote I/O nodes - downstream of a single power supply, so a short on one output trips only that channel and the signaling contact reports which one.
Specification
Full specification
General information 4
| product brand name | SITOP |
|---|---|
| product type designation | PSE200U |
| product designation | SITOP Selectivity module |
| type of current supply | Selectivity module, 4 x 3 A Common signal contact |
Input 5
| type of the power supply network | Controlled DC voltage |
|---|---|
| supply voltage at DC rated value | 24 V |
| input voltage at DC | 22 ... 30 V |
| overvoltage overload capability | 35 V |
| input current at rated input voltage 24 V rated value | 12 A |
Output 10
| voltage curve at output | controlled DC voltage |
|---|---|
| formula for output voltage | Vin - approx. 0.2 V |
| relative overall tolerance of the voltage note | In accordance with the supplying input voltage |
| number of outputs | 4 |
| output current up to 60 °C per output rated value | 3 A |
| adjustable current response value current of the current-dependent overload release | 0.5 ... 3 A |
| type of response value setting | via potentiometer |
| response delay maximum | 5 s |
| product feature parallel switching of outputs | No |
| type of outputs connection | simultaneous switch-on of all outputs after power-up of the supply voltage > 20 V, delay time of 25 ms, 100 ms, or "load-optimized" via DIP switch configurable for sequential switch-on |
Show all 92 specifications ↓ Show less ↑73 more values in Identification, Efficiency, Switch-off characteristic, Protection and monitoring, Safety, Standards, specifications, approvals, Standards, specifications, approvals hazardous environments, Standards, specifications, approvals marine classification, Standards, specifications, approvals Environmental Product Declaration, Ambient conditions, Connection method, Mechanical data, Accessories, Further information internet links, Additional information, Logistics.
Identification 10
| Part number | 6EP1961-2BA11 |
|---|---|
| Type designation | PSE200U |
| Brand | Siemens |
| Condition | New, factory sealed |
| Source | Siemens and its authorised distributors |
| Warranty | Manufacturer warranty |
| Lifecycle status | Active, in production |
| EAN | 4025515152651 |
| ETIM class | EC001440 |
| eCl@ss | 27371802 |
Efficiency 2
| efficiency in percent | 97 % |
|---|---|
| power loss [W] at rated output voltage for rated value of the output current typical | 9 W |
Switch-off characteristic 6
| switching characteristic: of the excess current | Iout = 1.0 ...1.5 x set value, switch-off after approx. 5 s |
|---|---|
| switching characteristic: of the current limitation | Iout = 1.5 x set value, switch-off after typ. 100 ms |
| switching characteristic: of the immediate switch-off | Iout > set value and Vin < 20 V, switch-off after approx. 0.5 ms |
| residual current at switch-off typical | 1 mA |
| design of the reset device/resetting mechanism | via sensor per output |
| remote reset function | non-isolated 24 V input (signal level "high" at > 15 V) |
Protection and monitoring 3
| fuse protection type at input | 5 A per output (not accessible) |
|---|---|
| display version for normal operation | Three-color LED per output: green LED for "Output switched through"; yellow LED for "Output switched off manually"; red LED for "Output switched off due to overcurrent" |
| design of the switching contact for signaling function | Common signal contact (changeover contact, rating 0.1 A/24 V DC) |
Safety 6
| galvanic isolation between input and output at switch-off | No |
|---|---|
| standard for safety | according to EN 62368-1 |
| operating resource protection class | Class III |
| protection class IP | IP20 |
| standard: for emitted interference | EN 55022 Class B |
| standard: for interference immunity | EN 61000-6-2 |
Standards, specifications, approvals 6
| certificate of suitability: CE marking | Yes |
|---|---|
| certificate of suitability: UL approval | Yes; UL-Recognized (UL 2367) File E328600; cULus-Listed (UL 508, CSA C22.2 No. 107.1) File E197259 |
| certificate of suitability: UKCA marking | Yes |
| certificate of suitability: EAC approval | Yes |
| type of certification: CB-certificate | Yes |
| MTBF at 40 °C | 755 915 h |
Standards, specifications, approvals hazardous environments 2
| certificate of suitability: IECEx | No |
|---|---|
| certificate of suitability: ATEX | No |
Standards, specifications, approvals marine classification 3
| shipbuilding approval | Yes |
|---|---|
| Marine classification association: American Bureau of Shipping Europe Ltd. (ABS) | Yes |
| Marine classification association: Det Norske Veritas (DNV) | Yes |
Standards, specifications, approvals Environmental Product Declaration 6
| Environmental Product Declaration | Yes |
|---|---|
| global warming potential [CO2 eq]: total | 255.6 kg |
| global warming potential [CO2 eq]: during manufacturing | 8.7 kg |
| global warming potential [CO2 eq]: during operation | 246.6 kg |
| global warming potential [CO2 eq]: after end of life | 0.2 kg |
| Siemens eco profile (SEP) | Siemens EcoTech |
Ambient conditions 4
| ambient temperature: during operation | -25 ... +60 °C; with natural convection |
|---|---|
| ambient temperature: during transport | -40 ... +85 °C |
| ambient temperature: during storage | -40 ... +85 °C |
| environmental category according to IEC 60721 | Climate class 3K3, 5 ... 95% no condensation |
Connection method 5
| type of electrical connection | screw terminal |
|---|---|
| at input | +24 V: 2 screw terminals for 0.5 ... 16 mm2; 0 V: 2 screw terminals for 0.5 ... 4 mm2 |
| at output | Output 1 ... 4: 1 screw terminal each for 0.5 ... 4 mm2 |
| for auxiliary contacts | Remote reset: 1 screw terminal for 0.5 ... 4 mm2 |
| for signaling contact | 3 screw terminals for 0.5 ... 4 mm2 |
Mechanical data 11
| width × height × depth of the enclosure | 72 × 80 × 72 mm |
|---|---|
| installation width × mounting height | 72 mm × 180 mm |
| required spacing: top | 50 mm |
| required spacing: bottom | 50 mm |
| required spacing: left | 0 mm |
| required spacing: right | 0 mm |
| fastening method | Snaps onto DIN rail EN 60715 35x7.5/15 |
| DIN-rail mounting | Yes |
| S7 rail mounting | No |
| wall mounting | No |
| housing can be lined up | Yes |
Accessories 1
| mechanical accessories | Device identification label 20 mm × 7 mm, TI-grey 3RT2900-1SB20 |
|---|
Further information internet links 1
| identification link | Yes; acc. to IEC 61406-1:2022 |
|---|
Additional information 1
| other information | Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified) |
|---|
Logistics 6
| Net weight | 0.17 kg |
|---|---|
| Country of origin | Romania |
| Shipping weight | 0.67 kg |
| Ships from | Türkiye |
| Dispatch | 13 Nov |
| Stock | Critical stock |
Source: manufacturer data · Last verified: 01 Nov 2026
Documents
Documents for 6EP1961-2BA11
No documents are on file for this part yet.
Ask us for the datasheet
Certifications
Certifications and standards
- CE marking
- UKCA marking
- EAC approval
- CB-certificate
- shipbuilding approval
- American Bureau of Shipping Europe Ltd. (ABS)
- Det Norske Veritas (DNV)
- Environmental Product Declaration
Quick answers
Questions about the PSE200U
What is the rated current of PSE200U?
The rated current of PSE200U is 12 A.
Which supply voltage is PSE200U rated for?
The rated operational voltage of PSE200U is 24 V AC.
What motor power is PSE200U rated for?
The rated motor power of PSE200U is 9 W kW.
What is the HS code of PSE200U for customs?
The tariff (HS) code on file for PSE200U is 85363010.
What is the EAN of PSE200U?
The EAN (GTIN) of PSE200U is 4025515152651.
Where does PSE200U ship from, and how fast?
PSE200U ships from Türkiye. Shipping calculated at checkout · import duties and taxes paid on arrival. Stock items are dispatched within 1–2 business days.
Guides
Guides for power supplies
Reviews
Customer reviews
Series
Siemens SITOP PSE200U
- Brand
- Siemens
- Series
- SITOP PSE200U
