Siemens 1FL2203-2AG00-0HC0 SIMOTICS S-1FL2 Servomotor 200W 3000rpm 200V Servo Motor

The Siemens 1FL2203-2AG00-0HC0 is a SIMOTICS S-1FL2 servo motor rated 200 W at 3,000 rpm, delivering 0.64 Nm rated torque from a 200 V 3AC supply. It pairs with the SINAMICS S200 drive and carries a 17-bit absolute singleturn encoder on a hybrid connector. The plain shaft ships without a holding brake, in IP54 protection without an oil seal.

Selection Notes

Stepping up from the 20 mm frame, this 30 mm shaft height variant doubles rated power to 200 W while keeping the same 3,000 rpm rated speed and 17-bit encoder resolution. Static and rated torque match at 0.64 Nm, so continuous holding load equals running load, with a 2.24 Nm peak for short accelerations. Rated current of 1.33 A against a 4.80 A peak sizes the SINAMICS S200 axis current loop with clear headroom. The 60.2 mm flange and 14 mm shaft diameter mark this as the mid-size 1FL2 frame. Within this shaft-height family, lower rated-power siblings suit lighter axes; the next frame up trades this footprint for more torque at the same base speed.

Applications

Natural cooling and IP54 protection without an oil seal fit panel-mounted or lightly enclosed installations rather than washdown areas. The 0.64 Nm rated torque and 6,500 rpm maximum speed suit small conveyor drives, rotary indexers, and short-stroke linear axes on a SINAMICS S200 single-axis system.