VFD vs Servo Drive: Key Differences
A side-by-side comparison of VFD and servo drive motor type, feedback, dynamic response, overload rating, cost, and applications for industrial engineers.
- Part number
- 1FK7083-2AF71-1QA0
SIMOTICS SSiemens 1FK7083-2AF71-1QA0 SIMOTICS S 1FK7-CT 3.3 kW 16 Nm 3000 rpm Servo Motor
Siemens 1FK7-CT servo motor, 3.3 kW, 16 Nm, 3,000 rpm, IP64, no holding brake.
Description
About the 1FK7083-2AF71-1QA0
About the 1FK7083-2AF71-1QA0
The Siemens 1FK7083-2AF71-1QA0 is a SIMOTICS S 1FK7-CT synchronous servo motor rated 3.3 kW with 16 Nm standstill torque at 100K and a 3,000 rpm rated speed. It runs on a 600 V DC link, uses natural cooling, and carries an IP64 enclosure with an absolute 20-bit single-turn DRIVE-CLiQ encoder (AS20DQI). This variant ships without a holding brake.
Selection Notes
Against the 2,000 rpm/16 Nm winding in the same frame, this 3,000 rpm version trades torque constant (1.58 Nm/A versus 2.13 Nm/A) for rated speed, raising rated power to 3.3 kW at the same 16 Nm standstill torque. Pick it when the application needs faster rapid-traverse moves at that torque level; pick the 2,000 rpm winding instead when the drive's current limit is the constraint rather than speed.
Applications
Typical use: higher-speed indexing and pick-and-place axes on SINAMICS S120/S210 lines where 16 Nm standstill torque and 3,000 rpm rated speed match the load profile.
Specification
Full specification
Engineering data 10
| Rated speed (100 K) | 3,000 rpm |
|---|---|
| Number of poles | 8 |
| Rated torque (100 K) | 10.5 Nm |
| Rated current | 7.2 A |
| Static torque (60 K) | 13.30 Nm |
| Static torque (100 K) | 16.00 Nm |
| Stall current (60 K) | 8.20 A |
| Stall current (100 K) | 10.10 A |
| Moment of inertia | 26.000 kgcm² |
| Efficiency | 93.0 % |
Physical constants 9
| Torque constant | 1.58 Nm/A |
|---|---|
| Voltage constant at 20º C | 102.5 V/1000*min¯¹ |
| Winding resistance at 20º C | 0.38 Ω |
| Rotating field inductance | 7.0 mH |
| Electrical time constant | 18.60 ms |
| Mechanical time constant | 1.18 ms |
| Thermal time constant | 50 min |
| Shaft torsional stiffness | 101,000 Nm/rad |
| Net weight of the motor | 15.6 kg Permanent-magnet synchronous |
Mechanical data 16
| Motor type | motor Compact |
|---|---|
| Shaft height | 80 |
| Cooling | Natural cooling |
| Radial runout tolerance | 0.050 mm |
| Concentricity tolerance | 0.10 mm |
| Axial runout tolerance | 0.10 mm |
| Vibration severity grade | Grade A |
| Connector size | M23 |
| Degree of protection | IP64 |
| Design acc. to Code I | IM B5 (IM V1, IM V3) |
| Temperature monitoring | Pt1000 temperature sensor |
| Electrical connectors | Connectors for signals and power rotatable |
| Color of the housing | Standard (Anthracite RAL 7016) |
| Holding brake | without holding brake |
| Shaft end | Feather key |
| Encoder system | Encoder AS20DQI: absolute encoder single-turn 20 bits |
Show all 54 specifications ↓ Show less ↑19 more values in Identification, Optimum operating point, Limiting data, Recommended Motor Module, Logistics.
Identification 5
| Part number | 1FK7083-2AF71-1QA0 |
|---|---|
| Brand | Siemens |
| Condition | New, factory sealed |
| Source | Siemens and its authorised distributors |
| Warranty | Manufacturer warranty |
Optimum operating point 2
| Optimum speed | 3,000 rpm |
|---|---|
| Optimum power | 3.3 kW |
Limiting data 4
| Max. permissible speed (mech.) | 6,000 rpm |
|---|---|
| Max. permissible speed (inverter) | 5,600 rpm |
| Maximum torque | 50.0 Nm |
| Maximum current | 37.0 A |
Recommended Motor Module 4
| Rated inverter current | 9A |
|---|---|
| Maximum inverter current | 27 A |
| Maximum torque | 40.00 Nm |
| Page 1 of 1 | Generated Sun Nov 1 02:22:15 CET 2026 |
Logistics 4
| Shipping weight | 17.601 kg |
|---|---|
| Ships from | Türkiye |
| Dispatch | — |
| Stock | On request |
Source: manufacturer data · Last verified: 01 Nov 2026
Documents
Documents for 1FK7083-2AF71-1QA0
No documents are on file for this part yet.
Ask us for the datasheet
Quick answers
Questions about the 1FK7083-2AF71-1QA0
What is the rated current of 1FK7083-2AF71-1QA0?
The rated current of 1FK7083-2AF71-1QA0 is 7.2 A.
What motor power is 1FK7083-2AF71-1QA0 rated for?
The rated motor power of 1FK7083-2AF71-1QA0 is 3.3 kW.
What is the HS code of 1FK7083-2AF71-1QA0 for customs?
The tariff (HS) code on file for 1FK7083-2AF71-1QA0 is 85015220.
Where does 1FK7083-2AF71-1QA0 ship from, and how fast?
1FK7083-2AF71-1QA0 ships from Türkiye. Shipping calculated at checkout · import duties and taxes paid on arrival.
Guides
Guides for servo drives
What Benefits Do Schneider Soft Starters Offer?
Discover how Schneider soft starters reduce mechanical stress, cut energy peaks, and extend motor life across demanding industrial uses. Shop at Stoklink.
How Do Schneider Soft Starters Reduce Energy Costs?
Schneider soft starters reduce energy costs by limiting inrush current, lowering demand charges, and minimizing mechanical wear on motors. Shop at Stoklink.
Reviews
Customer reviews
Series
Siemens SIMOTICS S
- Brand
- Siemens
- Series
- SIMOTICS S
