Part number
LUCB1XBL
Model no
LUCB
$85.33 On request Dispatch — · From TürkiyeGet a Quote
TeSys Ultra

Schneider Electric LUCB1XBL TeSys U Advanced Control Unit 0.35-1.4 A 24 V DC Motor Starter Module

TeSys U advanced control unit, 0.35-1.4 A adjustable, Class 10 with diagnostics, 24 V DC coil

Rated current
1.4 A
EAN
3389110364071
Description

About the LUCB

The Schneider Electric LUCB1XBL is a TeSys U advanced control unit providing adjustable thermal-magnetic motor protection from 0.35 to 1.4 A plus diagnostic outputs. Plugged into an advanced LUB120, LUB320, or LUB380 power base, it forms a starter-controller with Class 10 overload tripping, phase-failure sensing, earth-fault detection, a thermal-alarm signal via a LUFDA or LULC module, and a test pushbutton for 3-phase motors up to 0.25 kW at 400 V, controlled from a 24 V DC supply.

Certifications & Standards

  • CE
  • UL
  • CSA
  • CCC
  • EAC
  • IEC 60947-6-2
  • UL 60947-4-1
  • CSA C22.2 No 60947-4-1

Selection Notes

The LUCB1XBL shares the LUCB1XB's 0.35-1.4 A diagnostic protection but runs from a 24 V DC control bus, matching the LU2B12BL/LU2B32BL/LU2B38BL reversing bases where reversing and overload diagnostics are both required. Alarm wiring runs through a local LUFDA module or a remote LULC module depending on where the signal needs to surface. Drop to the plain LUCA1XBL if the alarm output adds unnecessary wiring.

Specification

Full specification

62 values · Last verified 30 Oct 2026

Main 19

Range TeSys
Range of Product TeSys Ultra
Product name TeSys Ultra
Device short name LUCB
Product or Component Type Advanced control unit
Device Application Motor control, Motor protection
Product Specific Application Basic protection and advanced functions, communication
main function available Earth fault protection, Protection against phase failure and phase imbalance, Protection against overload and short-circuit, Manual reset
Product compatibility Power base LUB12, Power base LUB32, Power base LUB38, Power base LUB120, Power base LUB320, Power base LUB380, Reversing contactor breaker LU2B12BL, Reversing contactor breaker LU2B32BL, Reversing contactor breaker LU2B38BL
[Ue] rated operational voltage 690 V AC
Network frequency 40...60 Hz
Load type 3-phase motor self-cooled
Utilisation category AC-43, AC-44, AC-41
Motor power kW 0.25 kW 400...440 V AC 50/60 Hz
rated motor current adjustment range 0.35…1.4 A
Thermal overload class Class 10 40…60 Hz -13…158 °F (-25…70 °C) IEC 60947-6-2, Class 10 40…60 Hz -13…158 °F (-25…70 °C) UL 508
Tripping threshold 14.2 x Ir +/- 20 %
Phase failure sensitivity Yes
[Uc] control circuit voltage 24 V DC

Complementary 15

Control circuit voltage limits 20...27 V DC 24 V in operation, 14.5 V DC 24 V drop-out
Typical current consumption 130 mA 24 V DC I maximum while closing with LUB12, 220 mA 24 V DC I maximum while closing with LUB32, 220 mA 24 V DC I maximum while closing with LUB38, 60 mA 24 V DC I rms sealed with LUB12, 80 mA 24 V DC I rms sealed with LUB32, 80 mA 24 V DC I rms sealed with LUB38
Heat dissipation 2 W control circuit with LUB12, 3 W control circuit with LUB32, 3 W control circuit with LUB38
Operating time 35 ms opening with LUB12 control circuit, 35 ms opening with LUB32 control circuit, 35 ms opening with LUB38 control circuit, 70 ms closing with LUB12 control circuit, 70 ms closing with LUB32 control circuit, 70 ms closing with LUB38 control circuit
Reset Manual reset
Standards EN 60947-6-2, IEC 60947-6-2, UL 60947-4-1, with phase barrier, CSA C22.2 No 60947-4-1, with phase barrier
Product Certifications CE, UL, CSA, CCC, EAC, ASEFA, ATEX, Marine
[Ui] rated insulation voltage 690 V IEC 60947-6-2, 600 V UL 60947-4-1, 600 V CSA C22.2 No 60947-4-1
[Uimp] rated impulse withstand voltage 6 kV IEC 60947-6-2
Safe separation of circuit 400 V SELV between the control and auxiliary circuits IEC 60947-1, 400 V SELV between the control or auxiliary circuit and the main circuit IEC 60947-1
Fixing mode Plug-in (front face)
Width 1.8 in (45 mm)
Height 2.6 in (66 mm)
Depth 2.4 in (60 mm)
Compatibility code LUCB

Environment 14

IP degree of protection IP20 front panel and wired terminals IEC 60947-1, IP20 other faces IEC 60947-1, IP40 front panel outside connection zone IEC 60947-1
Protective treatment TH IEC 60068
Ambient air temperature for operation -13…158 °F (-25…70 °C)
Ambient Air Temperature for Storage -40…185 °F (-40…85 °C)
Operating altitude 6561.68 ft (2000 m)
Fire resistance 1760 °F (960 °C) parts supporting live components IEC 60695-2-12, 1202 °F (650 °C) IEC 60695-2-12
Shock resistance 10 gn power poles open IEC 60068-2-27, 15 gn power poles closed IEC 60068-2-27
Vibration resistance 2 gn 5…300 Hz power poles open IEC 60068-2-6, 4 gn 5…300 Hz power poles closed IEC 60068-2-6
Resistance to electrostatic discharge 8 kV 3 in open air IEC 61000-4-2, 8 kV 4 on contact IEC 61000-4-2
Resistance to radiated fields 9.1 V/m (10 V/m) 3 IEC 61000-4-3
Resistance to fast transients 2 kV 3 serial link IEC 61000-4-4, 4 kV 4 all circuits except for serial link IEC 61000-4-4
Immunity to radioelectric fields 10 V IEC 61000-4-6
Immunity to microbreaks 3 ms
Immunity to voltage dips 70 % / 500 ms IEC 61000-4-11
Show all 62 specifications ↓ Show less ↑14 more values in Identification, Contractual warranty, Logistics.

Identification 8

Part number LUCB1XBL
Type designation LUCB
Brand Schneider Electric
Condition New, factory sealed
Source Schneider Electric and its authorised distributors
Warranty Manufacturer warranty
Lifecycle status Active, in production
EAN 3389110364071

Contractual warranty 1

Warranty (in months) 18

Logistics 5

Country of origin FR
Shipping weight 0.119 kg
Ships from Türkiye
Dispatch —
Stock On request

Source: manufacturer data · Last verified: 30 Oct 2026

Documents

Documents for LUCB1XBL

No documents are on file for this part yet.

Ask us for the datasheet
Certifications

Certifications and standards

  • UL
  • CSA
  • CE
  • CCC
  • EAC
  • Marine
  • EN 60947-6-2
  • IEC 60947-6-2
  • UL 60947-4-1
  • with phase barrier
Quick answers

Questions about the LUCB

What is the rated current of LUCB?

The rated current of LUCB is 1.4 A.

What is the HS code of LUCB for customs?

The tariff (HS) code on file for LUCB is 853650.

What is the EAN of LUCB?

The EAN (GTIN) of LUCB is 3389110364071.

Where does LUCB ship from, and how fast?

LUCB ships from Türkiye. Shipping calculated at checkout · import duties and taxes paid on arrival.

Guides

Guides for motor starters

All guides for motor starters
Reviews

Customer reviews

Series

Schneider Electric TeSys Ultra

Brand
Schneider Electric
Series
TeSys Ultra
$85.33 On request
Get a Quote
Quote

Get a Quote

LUCB

Genuine parts

Genuine, factory-sealed parts

Schneider Electric · LUCB1XBL

Every part on Stoklink is new, unused and made by the manufacturer named on the page.

Condition
New and unused, in the manufacturer's factory-sealed packaging.
Sourced from
Schneider Electric and its authorised distributors.
Warranty
The manufacturer's warranty applies.
If a part is not genuine
We refund the full amount.

Added to cart Could not add to cart

View cart