Schneider Electric LUCAX6B TeSys U Standard Control Unit 0.15-0.6 A 24 V AC Motor Starter Module

The Schneider Electric LUCAX6B is a TeSys U standard control unit with an adjustable motor current range of 0.15-0.6 A, inserted into a compatible power base to form a starter controller for 3-phase motors up to 0.09 kW at 400-440 V AC. It provides Class 10 thermal overload protection, phase-failure sensing, and a 24 V AC control coil.

Technical Specifications

Certifications & Standards

• CE
• UL
• CSA
• CCC
• EAC
• ASEFA
• ATEX
• Marine
• EN 60947-6-2
• IEC 60947-6-2
• UL 60947-4-1
• CSA C22.2 No 60947-4-1

Selection Notes

Set Ir within the 0.15-0.6 A window to match the motor's full-load current; Class 10 tripping at 14.2 x Ir covers standard-duty starts without needing a slower overload class. This standard control unit covers basic overload, short-circuit, phase-failure and earth-fault protection without a remote diagnostic output - pick it over the advanced control unit in this current range when the panel doesn't need a thermal-alarm signal or local test push button.