Part number
BLRCH339A407B48
$162.55 On request Dispatch — · From TürkiyeGet a Quote
PowerLogic

Schneider Electric BLRCH339A407B48 VarPlus Can HDuty 33.9 kvar 480 V 50 Hz Power Factor Correction Capacitor

Schneider Electric BLRCH339A407B48 — VarPlus Can HDuty power factor correction capacitor, 33.9 kvar at 480 V, 50 Hz.

Rated operational voltage
480 V AC
Description

About the BLRCH339A407B48

The Schneider Electric BLRCH339A407B48 is a VarPlus Can HDuty power factor correction capacitor rated 33.9 kvar at 480 V, 50 Hz (40.7 kvar at 60 Hz). Built with a metallized polypropylene film dielectric and a 1.8× In continuous overcurrent rating for networks with up to 20% harmonic content, it connects through a stud terminals in a 116 mm diameter, IP00 enclosure weighing 4.1 kg.

Certifications & Standards

  • IEC 60831-1
  • IEC 60831-2

Selection Notes

HDuty (heavy duty) construction gives the BLRCH339A407B48 a 1.8× In continuous overcurrent capacity, so it stays within rating on networks where variable-speed drives or rectifiers push harmonic distortion toward the 20% ceiling — a standard-duty capacitor sized only for the fundamental would overheat under the same load. At 480 V the unit delivers 33.9 kvar on a 50 Hz network or 40.7 kvar on a 60 Hz network from the same can, useful when the same bank design serves both European and North American sites. Pick this variant to match bus voltage directly rather than relying on a transformer tap; the 116 mm x 321 mm can and stud terminals keep the footprint compact for panel-mounted power factor correction banks.

Specification

Full specification

55 values · Last verified 30 Oct 2026

Main 11

Range PowerLogic
Range of product PowerLogic
Product or component type Heavy duty capacitor
Product name PowerLogic PFC Capacitor
Network frequency 50/60 Hz
Series name HDuty
Network harmonic content <= 20 %
Electrical parameters 33.9 kvar 480 V 50 Hz, 40.7 kvar 480 V 60 Hz
Maximum permissible voltage 1.1 x Un (8 hours over 24 hours)
continuous overcurrent capacity 1.8 x In
Rated voltage 480 V AC 50/60 Hz

Complementary 15

Dielectric losses < 0.2 W/kvar
Power losses < 0.5 W/kVAr
Capacitance tolerance - 5 % to 10 %
Voltage test 2.15 x Un AC between terminals for 10 s, <= 660 V - 3 kV AC between terminal and container for 10 s, >= 660 V - 6 kV AC between terminal and container for 10 s
Inrush current 250 x In
Maximum switching operation per year 7000
Service life in hours 130000 h
Dielectric material Metallized polypropylene film with Zn/Al alloy, special resistivity & profile, special edge (wave cut)
Impregnation material Non-PCB dry PUR resin, Biodegradable
Type of installation Indoor installation
Connections - terminals Stud terminals
Mounting mode Upright/horizontal
Diameter 116 mm
Height 321 mm
Net weight 4.1 kg

Environment 6

Standards IEC 60831-1, IEC 60831-2
IP degree of protection IP00
Operating altitude 2000 m
Temperature class D
Ambient air temperature for operation -25…55 °C
Relative humidity 95 %
Show all 55 specifications ↓ Show less ↑23 more values in Identification, Contractual warranty, Logistics.

Identification 6

Part number BLRCH339A407B48
Brand Schneider Electric
Condition New, factory sealed
Source Schneider Electric and its authorised distributors
Warranty Manufacturer warranty
Lifecycle status Active, in production

Contractual warranty 1

Warranty (in months) 18

Logistics 16

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 18.000 cm
Package 1 Width 18.000 cm
Package 1 Length 38.000 cm
Package 1 Weight 4.124 kg
Unit Type of Package 2 S06
Number of Units in Package 2 12
Package 2 Height 75.000 cm
Package 2 Width 60.000 cm
Package 2 Length 80.000 cm
Package 2 Weight 61.984 kg
Shipping weight 4.1 kg
Ships from Türkiye
Dispatch —
Stock On request

Source: manufacturer data · Last verified: 30 Oct 2026

Documents

Documents for BLRCH339A407B48

No documents are on file for this part yet.

Ask us for the datasheet
Certifications

Certifications and standards

  • IEC 60831-1
  • IEC 60831-2
Quick answers

Questions about the BLRCH339A407B48

Which supply voltage is BLRCH339A407B48 rated for?

The rated operational voltage of BLRCH339A407B48 is 480 V AC.

What is the HS code of BLRCH339A407B48 for customs?

The tariff (HS) code on file for BLRCH339A407B48 is 853210.

Where does BLRCH339A407B48 ship from, and how fast?

BLRCH339A407B48 ships from Türkiye. Shipping calculated at checkout · import duties and taxes paid on arrival.

Guides

Guides for power factor correction

All guides for power factor correction
Reviews

Customer reviews

Series

Schneider Electric PowerLogic

Brand
Schneider Electric
Series
PowerLogic
$162.55 On request
Get a Quote
Quote

Get a Quote

Genuine parts

Genuine, factory-sealed parts

Schneider Electric · BLRCH339A407B48

Every part on Stoklink is new, unused and made by the manufacturer named on the page.

Condition
New and unused, in the manufacturer's factory-sealed packaging.
Sourced from
Schneider Electric and its authorised distributors.
Warranty
The manufacturer's warranty applies.
If a part is not genuine
We refund the full amount.

Added to cart Could not add to cart

View cart