- Home
- ABB
- ABB 2CSF202401R1900 F202 A-100/0.03 AP-R 2P 100A 30mA Type A High Residual Current Circuit Breaker (RCCB) ABB 2CSF202401R1900 F202 A-100/0.03 AP-R 2P 100A 30mA Type A High Residual Current Circuit Breaker (RCCB)
ABB 2CSF202401R1900 F202 A-100/0.03 AP-R 2P 100A 30mA Type A High Residual Current Circuit Breaker (RCCB)
ABB 2CSF202401R1900 F202 A-100/0.03 AP-R 2P 100A 30mA Type A High Residual Current Circuit Breaker (RCCB)
Get Quote
- Description
The ABB 2CSF202401R1900 F202 A-100/0.03 AP-R is a 2-pole residual current circuit breaker rated 100 A with a 30 mA Type A APR trip and a 10 ms delay. That short delay filters out transient leakage spikes from switch-mode loads, reducing nuisance tripping while still meeting the 30 mA personal-protection threshold.
Technical Specifications
| SKU | 2CSF202401R1900 |
| Brand | ABB |
| Series | F202 |
| Catalog Designation | F202 A-100/0.03 AP-R |
| EAN | 8012542916505 |
| Type of Residual Current | Type A APR |
| Operating Characteristic | 10 ms Delay (High Immunity) |
| Number of Poles | 2P |
| Rated Current (In) | 100 A |
| Rated Residual Current | 30 mA |
| Rated Voltage (Ur) | 230 V |
| Rated Insulation Voltage (Ui) | 500 V |
| Rated Impulse Withstand Voltage (Uimp) | 4 kV |
| Rated Conditional Short-Circuit Current (Inc) | 10 kA |
| Test Voltage (Ut) | 170-254 V |
| Maximum Surge Current | 3 kA |
| Rated Frequency | 50/60 Hz |
| Power Loss | 13 W total |
| Degree of Protection | Terminals IP20 | Housing IP40 |
| Net Width | 35 mm |
| Net Height | 85 mm |
| Net Depth | 69 mm |
| Net Weight | 200 g |
Certifications & Standards
- IEC/EN 61008
- UL 1053
Selection Notes
The AP-R's 10 ms switching delay and higher 3 kA surge-withstand rating, versus roughly 0.25 kA on the standard instantaneous F202 AC models, are what let it ride through transient leakage from VFDs, switch-mode supplies, and similar electronic loads without tripping. At 30 mA it still meets the sensitivity needed for personal protection on a final circuit, unlike the 300 mA selective variant sized for a main incomer. Choose the 80 A rated version in the same AP-R line where the connected load is lighter and a lower terminal current rating is acceptable.