- Home
- ABB
- ABB 2CSA255103R1134 DS-ARC1 C13 A30 1P+N 13A 7.5kA Arc Fault Detection Device (AFDD) ABB 2CSA255103R1134 DS-ARC1 C13 A30 1P+N 13A 7.5kA Arc Fault Detection Device (AFDD)
ABB 2CSA255103R1134 DS-ARC1 C13 A30 1P+N 13A 7.5kA Arc Fault Detection Device (AFDD)
ABB 2CSA255103R1134 DS-ARC1 C13 A30 1P+N 13A 7.5kA Arc Fault Detection Device (AFDD)
Get Quote
- Description
Rated 1P+N, 13 A, curve C, 30 mA Type A and 7.5 kA breaking capacity, the ABB 2CSA255103R1134 DS-ARC1 C13 A30 is an arc fault detection device with integrated RCBO in three DIN-rail modules. It protects one final circuit against arc faults, overload, short-circuit and earth-fault current in a single device.
Technical Specifications
| SKU | 2CSA255103R1134 |
| Brand | ABB |
| Series | Arc Fault Detection Devices with Integrated Overcurrent and Residual Current Protection - AFDD+RCBO |
| Catalog Designation | DS-ARC1 C13 A30 |
| EAN | 8012542748311 |
| Number of Poles | 1P+N |
| Rated Current (In) | 13 A |
| Tripping Characteristic | C |
| Rated Residual Current | 30 mA |
| Type of Residual Current | Type A |
| Rated Ultimate Short-Circuit Breaking Capacity (Icu) | 7.5 kA |
| Rated Service Short-Circuit Breaking Capacity (Ics) | 6 kA |
| Rated Residual Breaking Capacity (IΔm) | 6 kA |
| Rated Operational Voltage | 230...240 V AC |
| Rated Insulation Voltage (Ui) | 500 V |
| Rated Impulse Withstand Voltage (Uimp) | 4 kV |
| Rated Frequency (f) | 50 … 60 Hz |
| Overvoltage Category | III |
| Power Loss | Total 2.0 W |
| Degree of Protection | Terminals IP20 | Housing IP40 |
| Number of Modules | 3 |
| Product Net Width | 52.5 mm |
| Product Net Weight | 240 g |
Certifications & Standards
- IEC/EN 62606
- IEC/EN 61009-1
- IEC/EN 61009-2-1
Selection Notes
At 13 A, the C curve's 5-to-10 times In magnetic trip threshold suits a circuit with motor, transformer or similar inrush that a B13 A30 device would risk tripping on start-up. This rating sits between the 10 A and 20 A versions in the same C-curve line; a resistive 13 A circuit without significant inrush is better matched to the B-curve equivalent instead.