- Home
- ABB
- ABB 1SCA153458R1001 OXB250E3S3QT 4P 250A 18kA Automatic Transfer Switch ABB 1SCA153458R1001 OXB250E3S3QT 4P 250A 18kA Automatic Transfer Switch
ABB 1SCA153458R1001 OXB250E3S3QT 4P 250A 18kA Automatic Transfer Switch
ABB 1SCA153458R1001 OXB250E3S3QT 4P 250A 18kA Automatic Transfer Switch
Get Quote
- Description
ABB's OXB250E3S3QT, SKU 1SCA153458R1001, is a 4-pole, 250 A TruONE automatic transfer switch with a switched neutral and an 18 kA, 0.3 s short-time withstand rating. The Level 3 LCD controller gives on-site visibility into transfer parameters, and supply cabling connects at the top with the load wired at the bottom (QT).
Technical Specifications
| SKU | 1SCA153458R1001 |
| Brand | ABB |
| Series | Automatic Transfer Switches TruONE |
| Catalog Designation | OXB250E3S3QT |
| EAN | 6417019844848 |
| Number of Poles | 4P |
| Fourth Pole Position | Left and right side |
| Fourth Pole Type | Switched, simultaneous function |
| Rated Operational Voltage | 200-480 V AC (main circuit) |
| Rated Operational Current AC-31B (Ie) | 250 A at 200-415 V AC |
| Rated Operational Current AC-32B (Ie) | 250 A at 200-415 V AC |
| Rated Operational Current AC-33B (Ie) | 250 A at 200-415 V AC |
| Conventional Free-air Thermal Current (Ith) | 250 A at 40 degC |
| Rated Short-time Withstand Current (Icw) | 18 kA for 0.3 s |
| Rated Insulation Voltage (Ui) | 1000 V |
| Rated Impulse Withstand Voltage (Uimp) | 8 kV |
| Rated Frequency | 50-60 Hz |
| Transition Type | Delayed (I-O-II) |
| Controller Type | Level 3 (LCD) |
| Line Terminal Position | Supply top, load bottom |
| Terminal Type | Bolt |
| Handle Type | Direct Mount |
| Degree of Protection | IP20 (front) |
| Pollution Degree | 3 |
| Power Loss | 9.7 W per pole, 29.1 W total |
| Dimensions (W x H x D) | 375 x 305 x 183 mm |
| Net Weight | 15.57 kg |
Certifications & Standards
- IEC 60947-6-1
Selection Notes
The OXB250E3S3QT carries the 250 A rating within the same S-coded, 4-pole frame as its lower-current siblings, switching the neutral along with the three phases for installations where that is required. Its Level 3 LCD controller sits between the base Level 2 DIP and the touchscreen Level 4, giving an on-site display for transfer events without the full interface. QT termination routes supply cabling in at the top of the enclosure rather than the bottom, the reverse of the QB layout.