Siemens 6SL3310-1GE36-1AA3 SINAMICS G130 Power Module 605A 315kW VFD Power Module

The Siemens SINAMICS G130 6SL3310-1GE36-1AA3 is a 380-480 V three-phase, IP00 power module rated 605 A / 315 kW, built as a 6-pulse supply without power recovery. It includes the CIM and Drive-CLiQ cable but ships without a control module, so a separate control unit is required to commission it.

Technical Specifications

Selection Notes

At 605 A / 315 kW, and IP00 rather than the IP20 rating used on the lower-power frames in this range, this module is meant for installation inside a closed cabinet rather than direct wall mounting, factor that into the enclosure design. Step up to a higher-current frame if the motor's nameplate current exceeds 605 A, or down for smaller loads rather than running this frame under-utilized. Its 6-pulse, non-power-recovery design also dissipates braking energy instead of returning it to the line, so plan for a braking resistor where the duty cycle involves frequent deceleration.

Applications

Sized for larger 380-480 V three-phase motor loads up to roughly 315 kW, including compressors, large pumps, and extruders, installed inside a cabinet that provides the enclosure rating the open IP00 module doesn't supply on its own at this power level, with the control unit and cabling specified separately.