Programmable Logic Controller Guide: Selection, Application, and Maintenance for Engineers
PLC selection guide for engineers covering IEC 61131 compliance, Siemens, Rockwell, Schneider, ABB comparison, scan time sizing, and wiring. Shop at Stoklink.
We sell remaining stock while it lasts.
No replacement announced yet. Tell us the application and we will propose an alternative.
The Siemens 6ES7552-1AA00-0AB0 is a SIMATIC S7-1500 TM Timer DIDQ 16x24V module providing up to 8 time-stamped digital inputs and 16 digital outputs, up to 16 of which carry a time stamp, at 24 V DC, with integrated counting, PWM, and oversampling functions. It runs on two separate 24 V DC load voltages and mounts directly on the S7-1500 rail.
Up to 16 of the digital outputs and up to 8 of the digital inputs can carry a hardware time stamp, so event sequencing on fast machine cycles does not depend on the CPU scan cycle catching the edge. PWM output and oversampling on the DQ side let a single channel generate a pulse train or sample faster than the base cycle time, useful where a standard fixed-sample DI/DQ module would miss short pulses. Four integrated counters, up to 200 kHz with quadruple evaluation on 24 V incremental encoders, cover speed or position feedback from simple 2-wire proximity sensors without a dedicated high-speed counting module. Two separate 24 V load-voltage groups, 1L+ for inputs and 2L+ for the encoder and output side, let a fault on one circuit be cleared without dropping the other.
Event logging and fast sequencing where the timing of a digital signal edge matters, such as packaging machines correlating a sensor trip with an actuator response, or PWM-driven valve control combined with time-stamped feedback for diagnostics.
| Product type designation | TM Timer DIDQ 16x24V |
|---|---|
| Product function: I&M data | Yes; I&M 0 |
| Product function: Isochronous mode | Yes |
| Engineering with: STEP 7 TIA Portal configurable/integrated from version | V13 Update 3 |
| Rail mounting | Yes; S7-1500 mounting rail |
|---|
| Load voltage 1L+: Rated value (DC) | 24 V |
|---|---|
| Load voltage 1L+: permissible range, lower limit (DC) | 19.2 V |
| Load voltage 1L+: permissible range, upper limit (DC) | 28.8 V |
| Load voltage 1L+: Reverse polarity protection | Yes; against destruction |
| Load voltage 2L+: Rated value (DC) | 24 V |
| Load voltage 2L+: permissible range, lower limit (DC) | 19.2 V |
| Load voltage 2L+: permissible range, upper limit (DC) | 28.8 V |
| Load voltage 2L+: Reverse polarity protection | Yes; against destruction |
| Part number | 6ES7552-1AA00-0AB0 |
|---|---|
| Type designation | TM Timer DIDQ 16x24V |
| Brand | Siemens |
| Condition | New, factory sealed |
| Source | Siemens and its authorised distributors |
| Warranty | Manufacturer warranty |
| Lifecycle status | Discontinued by the manufacturer |
| EAN | 4047623403791 |
| from load voltage 1L+ (without load), max. | 40 mA; without load |
|---|---|
| from load voltage 2L+ (without load), max. | 30 mA; without load |
| Number of outputs | 8; max. depending on parameterization |
|---|---|
| 24 V encoder supply: 24 V | Yes; L+ (-0.8 V) |
| 24 V encoder supply: Short-circuit protection | Yes |
| 24 V encoder supply: Output current, max. | 1.2 A; Total current of all encoders / channels, max. 0.5 A per output |
| Power consumption from the backplane bus | 1.3 W |
|---|
| Power loss, typ. | 5 W |
|---|
| Address space per module: Inputs | 44 byte |
|---|---|
| Address space per module: Outputs | 74 byte |
| Number of digital inputs | 8; max. depending on parameterization |
|---|---|
| Digital inputs, parameterizable | Yes |
| Input characteristic curve in accordance with IEC 61131, type 3 | Yes |
| Digital input functions, parameterizable: Digital input with time stamp | Yes |
| Digital input functions, parameterizable: Number, max. | 8 |
| Digital input functions, parameterizable: Counter | Yes |
| Digital input functions, parameterizable: Counter for incremental encoder | Yes |
| Digital input functions, parameterizable: Digital input with oversampling | Yes |
| Digital input functions, parameterizable: HW enable for digital input | Yes |
| Input voltage: Type of input voltage | DC |
| Input voltage: Rated value (DC) | 24 V |
| Input voltage: for signal "0" | -5 ... +5 V |
| Input voltage: for signal "1" | +11 to +30V |
| Input voltage: permissible voltage at input, min. | -30 V; -5 V continuous, -30 V brief reverse polarity protection |
| Input voltage: permissible voltage at input, max. | 30 V |
| Input current: for signal "1", typ. | 2.5 mA |
| Input delay (for rated value of input voltage): Minimum pulse width for program reactions for standard inputs | 3 µs; for parameterization "none" |
| Input delay (for rated value of input voltage): parameterizable | Yes; none / 0.05 / 0.1 / 0.4 / 0.8 ms |
| Cable length: shielded, max. | 1 000 m; Depending on sensor, cable quality and rate of change |
| Cable length: unshielded, max. | 600 m; Depending on sensor, cable quality and rate of change |
| Type of digital output | Transistor |
|---|---|
| Number of digital outputs | 16; max. depending on parameterization |
| in groups of | 8 |
| Current-sinking | Yes; With High Speed output |
| Current-sourcing | Yes |
| Digital outputs, parameterizable | Yes |
| Short-circuit protection | Yes; electronic/thermal |
| Response threshold, typ. | 1.7 A with Standard output, 0.5 A with High Speed output |
| Limitation of inductive shutdown voltage to | -0.8 V |
| Controlling a digital input | Yes |
| Digital output functions, parameterizable: Digital output with time stamp | Yes |
| Digital output functions, parameterizable: Number, max. | 16 |
| Digital output functions, parameterizable: PWM output | Yes |
| Switching capacity of the outputs: with resistive load, max. | 0.5 A; 0.1 A with High Speed output |
| Switching capacity of the outputs: on lamp load, max. | 5 W; 1 W with High Speed output |
| Load resistance range: lower limit | 48 Ω; 240 ohm with High Speed output |
| Load resistance range: upper limit | 12 kΩ |
| Output voltage: Type of output voltage | DC |
| Output voltage: for signal "0", max. | 1 V; With High Speed output |
| Output voltage: for signal "1", min. | 23.2 V; L+ (-0.8 V) |
| Output current: for signal "1" rated value | 0.5 A; 0.1 A with High Speed output, observe derating |
| Output current: for signal "1" permissible range, max. | 0.6 A; 0.12 A with High Speed output, observe derating |
| Output current: for signal "1" minimum load current | 2 mA |
| Output current: for signal "0" residual current, max. | 0.5 mA |
| Output delay with resistive load: "0" to "1", max. | 1 µs; With High Speed output, 5 µs with Standard output |
| Output delay with resistive load: "1" to "0", max. | 1 µs; With High Speed output, 6 µs with Standard output |
| Switching frequency: with resistive load, max. | 10 kHz |
| Switching frequency: on lamp load, max. | 10 Hz |
| Total current of the outputs: Current per group, max. | 4 A |
| Total current of the outputs: Current per module, max. | 8 A; Observe derating |
| Cable length: shielded, max. | 1 000 m; depending on load and cable quality |
| Cable length: unshielded, max. | 600 m; depending on load and cable quality |
| Connectable encoders: Incremental encoder (asymmetrical) | Yes |
|---|---|
| Connectable encoders: 24 V initiator | Yes |
| Connectable encoders: 2-wire sensor | Yes |
| Connectable encoders: permissible quiescent current (2-wire sensor), max. | 1.5 mA |
| Encoder signals, incremental encoder (asymmetrical): Input voltage | 24 V |
| Encoder signals, incremental encoder (asymmetrical): Input frequency, max. | 50 kHz |
| Encoder signals, incremental encoder (asymmetrical): Counting frequency, max. | 200 kHz; with quadruple evaluation |
| Encoder signals, incremental encoder (asymmetrical): Cable length, shielded, max. | 600 m; Depending on input frequency, encoder and cable quality; max. 200 m at 50 kHz |
| Encoder signals, incremental encoder (asymmetrical): Incremental encoder with A/B tracks, 90° phase offset | Yes |
| Encoder signals, incremental encoder (asymmetrical): pulse encoder | Yes |
| Interface types: Input characteristic curve in accordance with IEC 61131, type 3 | Yes |
| Bus cycle time (TDP), min. | 250 µs |
|---|---|
| Jitter, max. | 1 µs |
| Diagnostics function | Yes |
|---|---|
| Substitute values connectable | Yes |
| Alarms: Diagnostic alarm | Yes |
| Diagnoses: Monitoring the supply voltage | Yes |
| Diagnoses: Short-circuit | Yes |
| Diagnostics indication LED: RUN LED | Yes; green LED |
| Diagnostics indication LED: ERROR LED | Yes; red LED |
| Diagnostics indication LED: MAINT LED | Yes; Yellow LED |
| Diagnostics indication LED: Monitoring of the supply voltage (PWR-LED) | Yes; green LED |
| Diagnostics indication LED: Channel status display | Yes; green LED |
| Diagnostics indication LED: for channel diagnostics | Yes; red LED |
| Counter | Yes |
|---|---|
| Number of counters | 4 |
| Counting frequency, max. | 200 kHz; with quadruple evaluation |
| Counting functions: Continuous counting | Yes |
| Position detection: Incremental acquisition | Yes |
| Potential separation channels: between the channels and backplane bus | Yes |
|---|
| Isolation tested with | 707 V DC (type test) |
|---|
| Ambient temperature during operation: horizontal installation, min. | 0 °C |
|---|---|
| Ambient temperature during operation: vertical installation, min. | 0 °C |
| Altitude during operation relating to sea level: Installation altitude above sea level, max. | 5 000 m; restrictions for installation altitudes > 2 000 m, see ET 200MP system manual |
| to SIMATIC S7-1500 | Yes |
|---|
| Width | 35 mm |
|---|---|
| Height | 147 mm |
| Depth | 129 mm |
| Weight, approx. | 320 g |
|---|
| Net weight | 0.436 kg |
|---|---|
| Country of origin | DE |
| Shipping weight | 0.936 kg |
| Ships from | Türkiye |
| Dispatch | — |
| Stock | On request |
Source: manufacturer data · Last verified: 01 Nov 2026
No documents are on file for this part yet.
Ask us for the datasheetThe rated current of TM Timer DIDQ 16x24V is 0.5 A.
The rated operational voltage of TM Timer DIDQ 16x24V is 24 V AC.
The tariff (HS) code on file for TM Timer DIDQ 16x24V is 85389091.
The EAN (GTIN) of TM Timer DIDQ 16x24V is 4047623403791.
TM Timer DIDQ 16x24V ships from Türkiye. Shipping calculated at checkout · import duties and taxes paid on arrival.
PLC selection guide for engineers covering IEC 61131 compliance, Siemens, Rockwell, Schneider, ABB comparison, scan time sizing, and wiring. Shop at Stoklink.
Learn how a PLC works, including scan cycle, I/O sizing, IEC 61131-3 programming, and hardware selection for ABB, Schneider, and Siemens. Shop at Stoklink.
Master PLC system components: CPU, power supply, I/O modules, communication interfaces, and software with sizing formulas and selection tips. Shop at Stoklink.