Part number
6ES7526-1BH00-0AB0
Model no
F-DI 16x24VDC
$920.12 In stock · 50+ Dispatch Planned dispatch date. We aim to ship within 1 business day. Depending on warehouse workload it can take 2–3 business days. · From Türkiye
SIMATIC S7-1500

Siemens 6ES7526-1BH00-0AB0 SIMATIC ET 200MP F-DI 16x24VDC PROFIsafe SIL3 Fail-safe PLC I/O Module

SIMATIC ET 200MP F-DI 16x24VDC PROFIsafe, 16 fail-safe DC inputs, SIL 3 / PLe

Rated operational voltage
24 V AC
Communication
PROFIsafe
EAN
4047623405955
Description

About the F-DI 16x24VDC

The Siemens 6ES7526-1BH00-0AB0 is a SIMATIC ET 200MP fail-safe digital input module (F-DI 16x24VDC PROFIsafe) with sixteen 24 V DC safety inputs rated up to Performance Level e per ISO 13849-1 and SIL 3 per IEC 61508. It mounts on the ET 200MP backplane in a 35 mm module width and carries safety data over PROFIsafe into the F-CPU's safety program.

Certifications & Standards

  • ISO 13849-1 PLe
  • IEC 61508 SIL 3

Selection Notes

16 fail-safe channels on one 35 mm module cover a full safety zone (E-stops, guard doors, light curtains) without stacking multiple smaller F-DI modules, which keeps the ET 200MP rack shorter and cuts engineering points. The PLe / SIL 3 rating and PFH below 1.00E-09 1/h qualify it for the highest safety category most machine-safety applications require, so pick a lower-channel-count F-DI variant only when the panel has fewer safety signals to save rack width.

Applications

Wiring emergency-stop circuits, safety door interlocks, light curtains, and two-hand controls into a SIMATIC S7-1500 / ET 200MP safety program over PROFIsafe, in machine safety and process-safety installations that require SIL 3 / PLe certification.

Specification

Full specification

76 values · Last verified 01 Nov 2026

General information 6

Product type designation F-DI 16x24VDC
Firmware version: FW update possible Yes
Product function: I&M data Yes; I&M0 to I&M3
Engineering with: STEP 7 TIA Portal configurable/integrated from version V13 SP1 with HSP 0086
Operating mode: DI Yes
Operating mode: MSI No

Supply voltage 5

Rated value (DC) 24 V
permissible range, lower limit (DC) 19.2 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes
power supply according to NEC Class 2 required No

Input current 2

Current consumption (rated value) 50 mA; without load
Current consumption, max. 60 mA; without load
Show all 76 specifications ↓ Show less ↑63 more values in Identification, Encoder supply, Power, Power loss, Address area, Hardware configuration, Digital inputs, Interrupts/diagnostics/status information, Potential separation, Isolation, Standards, approvals, certificates, Ambient conditions, Dimensions, Version Classification, Logistics.

Identification 10

Part number 6ES7526-1BH00-0AB0
Type designation F-DI 16x24VDC
Brand Siemens
Condition New, factory sealed
Source Siemens and its authorised distributors
Warranty Manufacturer warranty
Lifecycle status Active, in production
EAN 4047623405955
ETIM class EC001419
eCl@ss 27242204

Encoder supply 5

Number of outputs 4
Short-circuit protection Yes; Electronic (response threshold 0.7 A to 1.8 A)
24 V encoder supply: 24 V Yes; min. L+ (-1.5 V)
24 V encoder supply: Short-circuit protection Yes
24 V encoder supply: Output current, max. 300 mA; Max. 100 mA when mounted vertically

Power 1

Power consumption from the backplane bus 0.9 W

Power loss 1

Power loss, typ. 4.6 W

Address area 2

Address space per module: Inputs 9 byte; S7-300/400F CPU, 8 byte
Address space per module: Outputs 5 byte; S7-300/400F CPU, 4 byte

Hardware configuration 2

Automatic encoding Yes
Electronic coding element type F Yes

Digital inputs 10

Number of digital inputs 16
Sourcing/sinking input Yes; P-reading
Input characteristic curve in accordance with IEC 61131, type 1 Yes
Input voltage: Rated value (DC) 24 V
Input voltage: for signal "0" -30 to +5 V
Input voltage: for signal "1" +15 to +30 V
Input current: for signal "1", typ. 3.7 mA
Input delay (for rated value of input voltage) for standard inputs: parameterizable Yes
Cable length: shielded, max. 1 000 m
Cable length: unshielded, max. 500 m

Interrupts/diagnostics/status information 12

Diagnostics function Yes
Alarms: Diagnostic alarm Yes
Alarms: Hardware interrupt No
Diagnoses: Monitoring the supply voltage Yes
Diagnoses: Wire break No
Diagnoses: Short-circuit Yes
Diagnoses: Group error Yes
Diagnostics indication LED: RUN LED Yes; green LED
Diagnostics indication LED: ERROR LED Yes; red LED
Diagnostics indication LED: Channel status display Yes; green LED
Diagnostics indication LED: for channel diagnostics Yes; red LED
Diagnostics indication LED: for module diagnostics Yes; red LED

Potential separation 1

Potential separation channels: between the channels and backplane bus Yes

Isolation 1

Isolation tested with 707 V DC (type test)

Standards, approvals, certificates 5

Suitable for safety functions Yes
Highest safety class achievable in safety mode: Performance level according to ISO 13849-1 PLe
Highest safety class achievable in safety mode: SIL acc. to IEC 61508 Probability of failure (for service life of 20 years and repair time of 100 hours) SIL 3
Highest safety class achievable in safety mode: Low demand mode: PFDavg in accordance with SIL3 < 5.00E-05
Highest safety class achievable in safety mode: High demand/continuous mode: PFH in accordance with SIL3 < 1.00E-09 1/h

Ambient conditions 2

Ambient temperature during operation: horizontal installation, min. 0 °C
Ambient temperature during operation: vertical installation, min. 0 °C

Dimensions 1

Width 35 mm

Version Classification 4

eClass 16 27-24-22-04
ETIM 10 EC001419
IDEA 4 3566
UNSPSC 15 32-15-17-05

Logistics 6

Net weight 0.333 kg
Country of origin DE
Shipping weight 0.833 kg
Ships from Türkiye
Dispatch 18 Nov
Stock In stock

Source: manufacturer data · Last verified: 01 Nov 2026

Documents

Documents for 6ES7526-1BH00-0AB0

No documents are on file for this part yet.

Ask us for the datasheet
Certifications

Certifications and standards

  • Suitable for safety functions
Quick answers

Questions about the F-DI 16x24VDC

Which supply voltage is F-DI 16x24VDC rated for?

The rated operational voltage of F-DI 16x24VDC is 24 V AC.

What is the HS code of F-DI 16x24VDC for customs?

The tariff (HS) code on file for F-DI 16x24VDC is 85389091.

What is the EAN of F-DI 16x24VDC?

The EAN (GTIN) of F-DI 16x24VDC is 4047623405955.

Where does F-DI 16x24VDC ship from, and how fast?

F-DI 16x24VDC ships from Türkiye. Shipping calculated at checkout · import duties and taxes paid on arrival. Stock items are dispatched within 1–2 business days.

Guides

Guides for PLC & controllers

All guides for PLC & controllers
Reviews

Customer reviews

Series

Siemens SIMATIC S7-1500

Brand
Siemens
Series
SIMATIC S7-1500
$920.12 In stock · 18 Nov
Quote

Get a Quote

F-DI 16x24VDC

Genuine parts

Genuine, factory-sealed parts

Siemens · 6ES7526-1BH00-0AB0

Every part on Stoklink is new, unused and made by the manufacturer named on the page.

Condition
New and unused, in the manufacturer's factory-sealed packaging.
Sourced from
Siemens and its authorised distributors.
Warranty
The manufacturer's warranty applies.
If a part is not genuine
We refund the full amount.

Added to cart Could not add to cart

View cart