Part number
6ES7422-1BH11-0AA0
$660.33 On request Dispatch — · From TürkiyeGet a Quote
Manufacturer phase-out

Siemens has announced the end of 6ES7422-1BH11-0AA0

Once production ends, supply depends on remaining stock.

No replacement announced yet. Tell us the application and we will propose an alternative.

SIMATIC S7-400

Siemens 6ES7422-1BH11-0AA0 SIMATIC S7-400 SM 422 16DO 24V DC 2A PLC I/O Module

Siemens SM 422 SIMATIC S7-400 digital output module, 16 x 24 V DC isolated outputs, 2 A per channel.

Rated current
2 A
EAN
4019169043045
Description

About the 6ES7422-1BH11-0AA0

The Siemens 6ES7422-1BH11-0AA0 SIMATIC S7-400 SM 422 module provides 16 isolated digital outputs rated 24 V DC, 2 A per channel, with electronic short-circuit protection tripping between 2.8 and 6 A. Outputs are grouped in isolated blocks of 8, and two outputs in the same group can be paralleled for redundant control of one load. Rated current derates above 40 degrees C.

Selection Notes

Rated 2 A per channel with a 2.8-6 A short-circuit trip threshold, this module suits solenoids and small motor starters switched directly from 24 V DC. Current derates from 3 A total up to 40°C to 2 A per pair of adjacent outputs above 40°C, so channel loading and cabinet temperature both matter at full load. Parallel outputs can be wired for redundant control of one load (same group only), not for uprating current – use a higher-current output module instead if a single load exceeds 2 A. Groups of 8 isolated channels keep 24 V DC output circuits separate from the backplane and from each other in blocks.

Specification

Full specification

54 values · Last verified 01 Nov 2026

Supply voltage 3

Load voltage L+: Rated value (DC) 24 V
Load voltage L+: permissible range, lower limit (DC) 20.4 V
Load voltage L+: permissible range, upper limit (DC) 28.8 V

Input current 2

from load voltage L+ (without load), max. 30 mA
from backplane bus 5 V DC, max. 160 mA

Power loss 1

Power loss, typ. 5 W
Show all 54 specifications ↓ Show less ↑48 more values in Identification, Digital outputs, Interrupts/diagnostics/status information, Potential separation, Isolation, Dimensions, Weights, Approvals / Certificates, Logistics.

Identification 7

Part number 6ES7422-1BH11-0AA0
Brand Siemens
Condition New, factory sealed
Source Siemens and its authorised distributors
Warranty Manufacturer warranty
Lifecycle status Phase-out announced by the manufacturer
EAN 4019169043045

Digital outputs 24

Number of digital outputs 16
Short-circuit protection Yes; Clocked electronically
Response threshold, typ. 2.8 to 6 A
Limitation of inductive shutdown voltage to -30 V
Controlling a digital input Yes; possible
Switching capacity of the outputs: on lamp load, max. 10 W
Load resistance range: lower limit 24 Ω
Load resistance range: upper limit 4 kΩ
Output voltage: for signal "1", min. L+ (-0.5 V)
Output current: for signal "1" rated value 2 A
Output current: for signal "1" permissible range, min. 5 mA
Output current: for signal "1" permissible range, max. 2.4 A
Output current: for signal "0" residual current, max. 0.5 mA
Output delay with resistive load: "0" to "1", max. 1 ms
Output delay with resistive load: "1" to "0", max. 1 ms
Parallel switching of two outputs: for uprating No; Not possible
Parallel switching of two outputs: for redundant control of a load Yes; possible (only outputs of the same group)
Switching frequency: with resistive load, max. 100 Hz
Switching frequency: with inductive load, max. 0.1 Hz
Switching frequency: with inductive load (acc. to IEC 60947-5-1, DC13), max. 0.2 Hz; 0.2 Hz at 1 A; 0.1 Hz at 2 A
Switching frequency: on lamp load, max. 10 Hz
Total current of the outputs (per group) all mounting positions: up to 40 °C, max. 3 A
Cable length: shielded, max. 1 000 m
Cable length: unshielded, max. 600 m

Interrupts/diagnostics/status information 1

Diagnostics function No

Potential separation 3

Potential separation digital outputs: between the channels Yes
Potential separation digital outputs: between the channels, in groups of 8
Potential separation digital outputs: between the channels and backplane bus Yes

Isolation 1

Isolation tested with 500 V DC

Dimensions 3

Width 25 mm
Height 290 mm
Depth 210 mm

Weights 1

Weight, approx. 600 g

Approvals / Certificates 2

General Product Approval Miscellaneous For use in hazard-
General Product Approval EMV ous locations

Logistics 6

Net weight 0.792 kg
Country of origin DE
Shipping weight 1.292 kg
Ships from Türkiye
Dispatch —
Stock On request

Source: manufacturer data · Last verified: 01 Nov 2026

Documents

Documents for 6ES7422-1BH11-0AA0

No documents are on file for this part yet.

Ask us for the datasheet
Quick answers

Questions about the 6ES7422-1BH11-0AA0

What is the rated current of 6ES7422-1BH11-0AA0?

The rated current of 6ES7422-1BH11-0AA0 is 2 A.

What is the HS code of 6ES7422-1BH11-0AA0 for customs?

The tariff (HS) code on file for 6ES7422-1BH11-0AA0 is 85389091.

What is the EAN of 6ES7422-1BH11-0AA0?

The EAN (GTIN) of 6ES7422-1BH11-0AA0 is 4019169043045.

Where does 6ES7422-1BH11-0AA0 ship from, and how fast?

6ES7422-1BH11-0AA0 ships from Türkiye. Shipping calculated at checkout · import duties and taxes paid on arrival.

Guides

Guides for PLC & controllers

All guides for PLC & controllers
Reviews

Customer reviews

Series

Siemens SIMATIC S7-400

Brand
Siemens
Series
SIMATIC S7-400
$660.33 On request
Get a Quote
Quote

Get a Quote

Genuine parts

Genuine, factory-sealed parts

Siemens · 6ES7422-1BH11-0AA0

Every part on Stoklink is new, unused and made by the manufacturer named on the page.

Condition
New and unused, in the manufacturer's factory-sealed packaging.
Sourced from
Siemens and its authorised distributors.
Warranty
The manufacturer's warranty applies.
If a part is not genuine
We refund the full amount.

Added to cart Could not add to cart

View cart