Part number
6ES7407-0DA02-0AA0
$552.69 On request Dispatch — · From TürkiyeGet a Quote
SIMATIC S7-400

Siemens 6ES7407-0DA02-0AA0 SIMATIC S7-400 PS407 4A Wide-Range Power Supply

SIMATIC S7-400 PS407 power supply, 120/230 V AC/DC wide-range input, 5 V DC/4 A backplane output.

Rated current
4 A
Rated operational voltage
120–230 V AC
Motor power
0.052 kW
EAN
4019169141987
Description

About the 6ES7407-0DA02-0AA0

The Siemens 6ES7407-0DA02-0AA0 SIMATIC S7-400 PS407 power supply is a wide-range unit for 120 or 230 V AC or DC input at 47 to 63 Hz, delivering 5 V DC at 4 A to the backplane bus plus 24 V DC at up to 0.5 A. Typical active power input is 52 W. It occupies one rack slot and weighs 760 g.

Certifications & Standards

  • BIS

Selection Notes

The PS407 4 A runs directly from 120/230 V AC or DC mains without a separate 24 V DC source, which makes it the choice when the installation only has AC or DC line power at the rack rather than a regulated DC bus. Its 4 A backplane-bus rating suits a lightly loaded single-segment rack; choose the higher-current wide-range variant when the combined 5 V DC module load exceeds 4 A.

Applications

Its 47 to 63 Hz frequency tolerance and dual 120/230 V AC or DC rating let the same unit run on either voltage without rewiring, useful where a rack ships to sites with different mains standards. Compliance with IEC 61000-3-2 and IEC 61000-3-3 limits its harmonic current draw on the AC supply.

Specification

Full specification

56 values · Last verified 01 Nov 2026

Supply voltage 10

Rated value (DC): 120 V DC Yes
Rated value (DC): 230 V DC Yes
Rated value (AC): 120 V AC Yes
Rated value (AC): 230 V AC Yes
Line frequency: Rated value 50 Hz Yes
Line frequency: Rated value 60 Hz Yes
Line frequency: permissible range, lower limit 47 Hz
Line frequency: permissible range, upper limit 63 Hz
Mains buffering: Mains/voltage failure stored energy time 20 ms
Mains buffering: Mains buffering according to NAMUR recommendation Yes

Input current 6

Rated value at 120 V DC 350 mA
Rated value at 230 V DC 190 mA
Rated value at 120 V AC 0.42 A
Rated value at 230 V AC 0.22 A
Inrush current, max. 8.5 A; Full width at half maximum 5 ms
Leakage current, max. 5 mA

Output voltage 3

Type of output voltage DC
Rated value (DC): 5 V DC Yes
Rated value (DC): 24 V DC Yes
Show all 56 specifications ↓ Show less ↑37 more values in Identification, Output current, Power, Power loss, Battery, Hardware configuration, Potential separation, Isolation, EMC, Degree and class of protection, Standards, approvals, certificates, Ambient conditions, Connection method, Dimensions, Weights, Approvals / Certificates, Logistics.

Identification 9

Part number 6ES7407-0DA02-0AA0
Brand Siemens
Condition New, factory sealed
Source Siemens and its authorised distributors
Warranty Manufacturer warranty
Lifecycle status Active, in production
EAN 4019169141987
ETIM class EC000599
eCl@ss 27242209

Output current 3

for backplane bus (5 V DC), max. 4 A; no base load required
for backplane bus (24 V DC), max. 0.5 A; idling-proof
Short-circuit protection Yes

Power 1

Active power input, typ. 52 W

Power loss 1

Power loss, typ. 20 W

Battery 1

Backup battery: Backup battery (optional) Yes; 1x lithium AA; 3.6 V / 2.2 Ah

Hardware configuration 1

Slots: required slots 1

Potential separation 1

primary/secondary Yes

Isolation 1

Overvoltage category II

EMC 1

Compliance with line harmonic distortion limits: Compliance with line harmonic distortion acc. to IEC 61000-3-2, IEC 61000-3-3 Yes

Degree and class of protection 1

Equipment protection class I, with protective conductor

Standards, approvals, certificates 2

FM approval Yes; Ta: 0 °C to 70 °C T4
BIS Yes

Ambient conditions 2

Ambient temperature during operation: min. 0 °C
Ambient temperature during operation: max. 60 °C

Connection method 1

Design of electrical connection 3x 1.5 mm2, solid or stranded wire with end sleeve, external diameter 3 mm to 9 mm

Dimensions 3

Width 25 mm
Height 290 mm
Depth 217 mm

Weights 1

Weight, approx. 760 g

Approvals / Certificates 2

General Product Approval Miscellaneous For use in hazard-
General Product Approval EMV ous locations

Logistics 6

Net weight 0.959 kg
Country of origin DE
Shipping weight 1.459 kg
Ships from Türkiye
Dispatch —
Stock On request

Source: manufacturer data · Last verified: 01 Nov 2026

Documents

Documents for 6ES7407-0DA02-0AA0

No documents are on file for this part yet.

Ask us for the datasheet
Certifications

Certifications and standards

  • BIS
Quick answers

Questions about the 6ES7407-0DA02-0AA0

What is the rated current of 6ES7407-0DA02-0AA0?

The rated current of 6ES7407-0DA02-0AA0 is 4 A.

Which supply voltage is 6ES7407-0DA02-0AA0 rated for?

The rated operational voltage of 6ES7407-0DA02-0AA0 is 120–230 V AC.

What motor power is 6ES7407-0DA02-0AA0 rated for?

The rated motor power of 6ES7407-0DA02-0AA0 is 0.052 kW.

What is the HS code of 6ES7407-0DA02-0AA0 for customs?

The tariff (HS) code on file for 6ES7407-0DA02-0AA0 is 85044095.

What is the EAN of 6ES7407-0DA02-0AA0?

The EAN (GTIN) of 6ES7407-0DA02-0AA0 is 4019169141987.

Where does 6ES7407-0DA02-0AA0 ship from, and how fast?

6ES7407-0DA02-0AA0 ships from Türkiye. Shipping calculated at checkout · import duties and taxes paid on arrival.

Guides

Guides for PLC & controllers

All guides for PLC & controllers
Reviews

Customer reviews

Series

Siemens SIMATIC S7-400

Brand
Siemens
Series
SIMATIC S7-400
$552.69 On request
Get a Quote
Quote

Get a Quote

Genuine parts

Genuine, factory-sealed parts

Siemens · 6ES7407-0DA02-0AA0

Every part on Stoklink is new, unused and made by the manufacturer named on the page.

Condition
New and unused, in the manufacturer's factory-sealed packaging.
Sourced from
Siemens and its authorised distributors.
Warranty
The manufacturer's warranty applies.
If a part is not genuine
We refund the full amount.

Added to cart Could not add to cart

View cart