Programmable Logic Controller Guide: Selection, Application, and Maintenance for Engineers
PLC selection guide for engineers covering IEC 61131 compliance, Siemens, Rockwell, Schneider, ABB comparison, scan time sizing, and wiring. Shop at Stoklink.
The Siemens 6ES7154-3AB00-0AB0 is a SIMATIC ET 200pro interface module (IM 154-3 PN HF) that connects the ET 200pro I/O station to PROFINET IO through an integrated switch with IRT support. It runs from a 24 V DC supply, addresses 256 bytes of inputs and 256 bytes of outputs, and adds PROFIsafe for fail-safe communication. A connection module (6ES7194-4AK00-0AA0) is required and ordered separately.
The HF designation on the IM 154-3 PN is what unlocks IRT and PROFIsafe support, so it is the interface module to choose when the ET 200pro station sits on an isochronous PROFINET segment or needs fail-safe I/O; a non-HF module would drop both. Hot swapping means a module can be replaced without powering down the station, and the separately fused lower-part connector protects the electronics from a short on the load side. The connection module 6ES7194-4AK00-0AA0 must be ordered separately to complete the mechanical mounting.
Head module for an ET 200pro remote I/O station on a PROFINET line, particularly where isochronous or PROFIsafe fail-safe I/O runs on the same network segment as standard I/O.
| Product type designation | IM 154-3 PN HF |
|---|---|
| Vendor identification (VendorID) | 0x002A |
| Device identifier (DeviceID) | 0x0305 |
| Product function: IRT | Yes |
| Rated value (DC) | 24 V |
|---|---|
| Reverse polarity protection | Yes; against destruction |
| Short-circuit protection | Yes; Fuse in lower part is exchangeable, the fuse on the IM-LP is not |
| power supply according to NEC Class 2 required | No |
| Load voltage 2L+: Rated value (DC) | 24 V |
| Load voltage 2L+: Reverse polarity protection | Yes; against destruction |
| from supply voltage 1L+, max. | 300 mA |
|---|
| Part number | 6ES7154-3AB00-0AB0 |
|---|---|
| Type designation | IM 154-3 PN HF |
| Brand | Siemens |
| Condition | New, factory sealed |
| Source | Siemens and its authorised distributors |
| Warranty | Manufacturer warranty |
| Lifecycle status | Active, in production |
| EAN | 4047623407874 |
| ETIM class | EC001604 |
| eCl@ss | 27242608 |
| Power loss, typ. | 5 W |
|---|
| Address space per module: Inputs | 256 byte |
|---|---|
| Address space per module: Outputs | 256 byte |
| Interfaces/bus type | PROFINET IO |
|---|
| M12 port: Autonegotiation | Yes |
|---|---|
| M12 port: Transmission rate, max. | 100 Mbit/s |
| Supports protocol for PROFINET IO | Yes |
|---|---|
| PROFIsafe | Yes |
| PROFIBUS | No |
| EtherNet/IP | No |
| Protocols (Ethernet): SNMP | Yes |
| Protocols (Ethernet): LLDP | Yes |
| Protocols (Ethernet): ping | Yes |
| Protocols (Ethernet): ARP | Yes |
| Redundancy mode Media redundancy: MRP | Yes |
| Alarms: Diagnostic alarm | Yes; Parameterizable |
|---|---|
| Alarms: Hardware interrupt | Yes; Parameterizable |
| Diagnostics indication LED: MAINT LED | Yes |
| Diagnostics indication LED: LINK LED | Yes |
| Diagnostics indication LED: RX/TX LED | Yes |
| Diagnostics indication LED: For load voltage monitoring | Yes |
| Diagnostics indication LED: Bus fault BF (red) | Yes |
| Diagnostics indication LED: Group error SF (red) | Yes |
| Diagnostics indication LED: Monitoring 24 V voltage supply ON (green) | Yes |
| between backplane bus and electronics | No |
|---|---|
| between supply voltage and electronics | Yes |
| Isolation tested with | 707 V DC (type test) |
|---|
| Ambient temperature during operation: min. | -25 °C |
|---|---|
| Ambient temperature during operation: max. | 55 °C |
| Ambient temperature during storage/transportation: min. | -40 °C |
| Ambient temperature during storage/transportation: max. | 70 °C |
| Width | 90 mm |
|---|---|
| Height | 130 mm |
| Depth | 60 mm |
| Weight, approx. | 375 g |
|---|
| Net weight | 0.409 kg |
|---|---|
| Country of origin | DE |
| Shipping weight | 0.909 kg |
| Ships from | Türkiye |
| Dispatch | — |
| Stock | On request |
Source: manufacturer data · Last verified: 01 Nov 2026
No documents are on file for this part yet.
Ask us for the datasheetThe rated operational voltage of IM 154-3 PN HF is 24 V AC.
The tariff (HS) code on file for IM 154-3 PN HF is 85176200.
The EAN (GTIN) of IM 154-3 PN HF is 4047623407874.
IM 154-3 PN HF ships from Türkiye. Shipping calculated at checkout · import duties and taxes paid on arrival.
PLC selection guide for engineers covering IEC 61131 compliance, Siemens, Rockwell, Schneider, ABB comparison, scan time sizing, and wiring. Shop at Stoklink.
Learn how a PLC works, including scan cycle, I/O sizing, IEC 61131-3 programming, and hardware selection for ABB, Schneider, and Siemens. Shop at Stoklink.
Master PLC system components: CPU, power supply, I/O modules, communication interfaces, and software with sizing formulas and selection tips. Shop at Stoklink.