Programmable Logic Controller Guide: Selection, Application, and Maintenance for Engineers
PLC selection guide for engineers covering IEC 61131 compliance, Siemens, Rockwell, Schneider, ABB comparison, scan time sizing, and wiring. Shop at Stoklink.
Once production ends, supply depends on remaining stock.
No replacement announced yet. Tell us the application and we will propose an alternative.
The Siemens 6ES7154-2AA01-0AB0 IM 154-2 DP HF is the High Feature PROFIBUS DP interface module for the SIMATIC ET 200pro distributed I/O station, adding PROFIsafe support on top of the standard 12 Mbit/s DP connection so the same station can mix fail-safe F-DI/F-DO modules with standard I/O. It addresses 244 bytes of inputs and 244 bytes of outputs and supports hot swapping of downstream modules.
PROFIsafe support is what sets the HF, High Feature, variant apart from the standard ET 200pro interface module: it lets the same station carry fail-safe F-DI, F-DI/F-DO and F-Switch modules alongside standard I/O on one PROFIBUS DP segment. Everything else, 12 Mbit/s with automatic detection, the 244/244 byte address space, hot-swap support, matches the standard module, so the choice comes down to whether the station needs a safety function at all. Like the other ET 200pro interface and power modules, it mounts on a separately ordered connection module rather than directly to the backplane.
| Product type designation | IM 154-2 DP HF |
|---|---|
| Vendor identification (VendorID) | 8119 H |
| Rated value (DC) | 24 V |
|---|---|
| Reverse polarity protection | Yes; against destruction |
| Short-circuit protection | Yes; over exchangeable fuses |
| power supply according to NEC Class 2 required | No |
| Load voltage 2L+: Rated value (DC) | 24 V |
| Load voltage 2L+: Reverse polarity protection | Yes; against destruction |
| from supply voltage 1L+, max. | 200 mA |
|---|
| Part number | 6ES7154-2AA01-0AB0 |
|---|---|
| Type designation | IM 154-2 DP HF |
| Brand | Siemens |
| Condition | New, factory sealed |
| Source | Siemens and its authorised distributors |
| Warranty | Manufacturer warranty |
| Lifecycle status | Phase-out announced by the manufacturer |
| EAN | 4025515078388 |
| ETIM class | EC001604 |
| eCl@ss | 27242608 |
| Power loss, typ. | 5 W |
|---|
| Address space per module: Inputs | 244 byte |
|---|---|
| Address space per module: Outputs | 244 byte |
| Interfaces/bus type | PROFIBUS DP |
|---|
| RS 485: Transmission rate, max. | 12 Mbit/s |
|---|---|
| RS 485: automatic detection of transmission rate | Yes |
| Supports protocol for PROFINET IO | No |
|---|---|
| PROFIsafe | Yes |
| PROFIBUS | Yes |
| EtherNet/IP | No |
| PROFIBUS DP Services: SYNC capability | Yes |
| PROFIBUS DP Services: FREEZE capability | Yes |
| PROFIBUS DP Services: Direct data exchange (slave-to-slave communication) | Yes |
| Alarms: Diagnostic alarm | Yes; Parameterizable |
|---|---|
| Alarms: Hardware interrupt | Yes; Parameterizable |
| Diagnostics indication LED: For load voltage monitoring | Yes |
| Diagnostics indication LED: Bus fault BF (red) | Yes |
| Diagnostics indication LED: Group error SF (red) | Yes |
| Diagnostics indication LED: Monitoring 24 V voltage supply ON (green) | Yes |
| between supply voltage and electronics | Yes |
|---|
| Isolation tested with | 707 V DC (type test) |
|---|
| Ambient temperature during operation: min. | -25 °C |
|---|---|
| Ambient temperature during operation: max. | 55 °C |
| Ambient temperature during storage/transportation: min. | -40 °C |
| Ambient temperature during storage/transportation: max. | 70 °C |
| Width | 90 mm |
|---|---|
| Height | 130 mm |
| Depth | 60 mm |
| Weight, approx. | 375 g |
|---|
| China RoHS Manufacturer Declara- | tion |
|---|
| Net weight | 0.403 kg |
|---|---|
| Country of origin | DE |
| Shipping weight | 0.903 kg |
| Ships from | Türkiye |
| Dispatch | — |
| Stock | On request |
Source: manufacturer data · Last verified: 01 Nov 2026
No documents are on file for this part yet.
Ask us for the datasheetThe rated operational voltage of IM 154-2 DP HF is 24 V DC.
The tariff (HS) code on file for IM 154-2 DP HF is 85176200.
The EAN (GTIN) of IM 154-2 DP HF is 4025515078388.
IM 154-2 DP HF ships from Türkiye. Shipping calculated at checkout · import duties and taxes paid on arrival.
PLC selection guide for engineers covering IEC 61131 compliance, Siemens, Rockwell, Schneider, ABB comparison, scan time sizing, and wiring. Shop at Stoklink.
Learn how a PLC works, including scan cycle, I/O sizing, IEC 61131-3 programming, and hardware selection for ABB, Schneider, and Siemens. Shop at Stoklink.
Master PLC system components: CPU, power supply, I/O modules, communication interfaces, and software with sizing formulas and selection tips. Shop at Stoklink.