Programmable Logic Controller Guide: Selection, Application, and Maintenance for Engineers
PLC selection guide for engineers covering IEC 61131 compliance, Siemens, Rockwell, Schneider, ABB comparison, scan time sizing, and wiring. Shop at Stoklink.
The Siemens 6ES7145-4FF00-0AB0 is a SIMATIC ET 200pro EM 4AO-U HF electronic module with 4 voltage analog outputs (0-10 V, 1-5 V, or -10 V to +10 V), 15-bit resolution, and per-channel short-circuit protection. It runs from a 24 V DC supply, draws 65 mA rated current, and needs the connection module IO 6ES7194-4..00-0AA0, sold as a separate line item, to complete an ET 200pro station.
15-bit resolution on the -10 V to +10 V and 0-10 V ranges (14-bit on 1-5 V) gives finer output steps than a standard-feature analog module, useful for closed-loop setpoint outputs that need tight linearity. Per-channel electronic short-circuit protection to chassis lets one shorted output be cleared without taking down the other three channels. Connecting it into an ET 200pro station additionally requires the IO connection module 6ES7194-4..00-0AA0, sold as a separate line item.
Fits closed-loop analog setpoint outputs at -10 to +10 V, 0-10 V, or 1-5 V for valve positioners, drive references, or process control loops on an ET 200pro station.
| Rated value (DC) | 24 V |
|---|---|
| Reverse polarity protection | Yes; against destruction |
| from supply voltage 1L+, max. | 65 mA |
|---|---|
| from backplane bus 3.3 V DC, max. | 10 mA |
| Number of outputs | 4 |
|---|---|
| Short-circuit protection | Yes; per module |
| Output current: up to 55 °C, max. | 1 A |
| Part number | 6ES7145-4FF00-0AB0 |
|---|---|
| Brand | Siemens |
| Condition | New, factory sealed |
| Source | Siemens and its authorised distributors |
| Warranty | Manufacturer warranty |
| Lifecycle status | Active, in production |
| EAN | 4025515072621 |
| ETIM class | EC001596 |
| eCl@ss | 27242601 |
| Power loss, typ. | 1.7 W |
|---|
| Address space per module: Address space per module, max. | 8 byte |
|---|
| Number of analog outputs | 4 |
|---|---|
| Voltage output, short-circuit protection | Yes; per channel, electronic to chassis |
| Voltage output, short-circuit current, max. | 50 mA |
| Cycle time (all channels) max. | 3 ms |
| Output ranges, voltage: 0 to 10 V | Yes |
| Output ranges, voltage: 1 V to 5 V | Yes |
| Output ranges, voltage: -10 V to +10 V | Yes |
| Connection of actuators: for voltage output two-wire connection | Yes |
| Connection of actuators: for voltage output four-wire connection | Yes |
| Load impedance (in rated range of output): with voltage outputs, min. | 1 000 Ω |
| Destruction limits against externally applied voltages and currents: Voltages at the outputs towards MANA | 16 V; Permanent |
| Cable length: shielded, max. | 30 m |
| Integration and conversion time/resolution per channel: Resolution with overrange (bit including sign), max. | 15 bit; at -10 to +10 V; 14 bit at 1 to 5 V; 15 bit at 0 to 10 V |
|---|---|
| Integration and conversion time/resolution per channel: Conversion time (per channel) | 0.7 ms |
| Settling time: for resistive load | 0.1 ms |
| Settling time: for capacitive load | 6 ms |
| Output ripple (relative to output range, bandwidth 0 to 50 kHz), | 0.02 % |
|---|
| Linearity error (relative to output range), (+/-) | 0.1 % |
|---|---|
| Temperature error (relative to output range), (+/-) | 0.01 %/K |
| Repeat accuracy in steady state at 25 °C (relative to output range), (+/-) | 0.05 % |
| Operational error limit in overall temperature range: Voltage, relative to output range, (+/-) | 0.2 % |
| Basic error limit (operational limit at 25 °C): Voltage, relative to output range, (+/-) | 0.15 % |
| Substitute values connectable | Yes |
|---|---|
| Alarms: Diagnostic alarm | Yes; Parameterizable |
| Alarms: Hardware interrupt | No |
| Diagnoses: Diagnostic information readable | Yes |
| Diagnoses: Wire break | No |
| Diagnoses: Short-circuit | Yes; per channel, not in zero range |
| Diagnostics indication LED: Group error SF (red) | Yes |
| Potential separation analog outputs: between the channels | No |
|---|---|
| Potential separation analog outputs: between the channels and backplane bus | Yes |
| Isolation tested with | 707 V DC (type test) |
|---|
| Width | 45 mm |
|---|---|
| Height | 130 mm |
| Depth | 35 mm |
| Weight, approx. | 150 g |
|---|
| Net weight | 0.181 kg |
|---|---|
| Country of origin | DE |
| Shipping weight | 0.681 kg |
| Ships from | Türkiye |
| Dispatch | — |
| Stock | On request |
Source: manufacturer data · Last verified: 01 Nov 2026
No documents are on file for this part yet.
Ask us for the datasheetThe rated operational voltage of 6ES7145-4FF00-0AB0 is 24 V AC.
The tariff (HS) code on file for 6ES7145-4FF00-0AB0 is 85389091.
The EAN (GTIN) of 6ES7145-4FF00-0AB0 is 4025515072621.
6ES7145-4FF00-0AB0 ships from Türkiye. Shipping calculated at checkout · import duties and taxes paid on arrival.
PLC selection guide for engineers covering IEC 61131 compliance, Siemens, Rockwell, Schneider, ABB comparison, scan time sizing, and wiring. Shop at Stoklink.
Learn how a PLC works, including scan cycle, I/O sizing, IEC 61131-3 programming, and hardware selection for ABB, Schneider, and Siemens. Shop at Stoklink.
Master PLC system components: CPU, power supply, I/O modules, communication interfaces, and software with sizing formulas and selection tips. Shop at Stoklink.