Programmable Logic Controller Guide: Selection, Application, and Maintenance for Engineers
PLC selection guide for engineers covering IEC 61131 compliance, Siemens, Rockwell, Schneider, ABB comparison, scan time sizing, and wiring. Shop at Stoklink.
The Siemens 6ES7144-4FF01-0AB0 is a SIMATIC ET 200pro High Feature analog input module with 4 voltage channels covering 0 to 10 V, 1 to 5 V, -5 to +5 V and -10 to +10 V. It resolves 15 bit plus sign with a linearity error of only 0.0075%, and it mounts on the ET 200pro bus module with a separate connection module ordered apart.
The four selectable voltage ranges, including bipolar +/-5 V and +/-10 V, mean this module covers most standard sensor and transducer voltage outputs without a separate range-specific part. Its 15-bit-plus-sign resolution and 0.0075% linearity error are High Feature grade, worth choosing over a standard-accuracy analog input module wherever a control loop is sensitive to measurement noise, and the parameterizable smoothing (1x/4x/16x/64x cycle time) trades response speed for further noise reduction when the process is slow.
Fits ET 200pro stations reading analog voltage signals from process transmitters, potentiometers or 0-10 V sensors where measurement accuracy matters, such as level, position or setpoint feedback loops.
| Rated value (DC) | 24 V |
|---|---|
| Reverse polarity protection | Yes; against destruction |
| from supply voltage 1L+, max. | 40 mA; Typical |
|---|---|
| from backplane bus 3.3 V DC, max. | 12 mA; Typical |
| Number of outputs | 4 |
|---|---|
| Short-circuit protection | Yes; per module, electronic to frame |
| Output current: up to 55 °C, max. | 1 A |
| Part number | 6ES7144-4FF01-0AB0 |
|---|---|
| Brand | Siemens |
| Condition | New, factory sealed |
| Source | Siemens and its authorised distributors |
| Warranty | Manufacturer warranty |
| Lifecycle status | Active, in production |
| EAN | 4047623403227 |
| ETIM class | EC001596 |
| eCl@ss | 27242601 |
| Power loss, typ. | 1.1 W |
|---|
| Address space per module: Address space per module, max. | 8 byte |
|---|
| Number of analog inputs | 4 |
|---|---|
| permissible input voltage for voltage input (destruction limit), max. | 35 V |
| Cycle time (all channels) max. | 5 ms |
| Input ranges (rated values), voltages: 0 to +10 V | Yes |
| Input ranges (rated values), voltages: 1 V to 5 V | Yes |
| Input ranges (rated values), voltages: -10 V to +10 V | Yes |
| Input ranges (rated values), voltages: -5 V to +5 V | Yes |
| Cable length: shielded, max. | 30 m |
| Measurement principle | integrating |
|---|---|
| Integration and conversion time/resolution per channel: Resolution with overrange (bit including sign), max. | 15 bit; 15 bit + sign at ±10 V, at ±5 V; 15 bit at 0 V to 10 V, at 1 V to 5 V |
| Integration and conversion time/resolution per channel: Integration time (ms) | 60 / 20 / 16.7 / 0.3 |
| Integration and conversion time/resolution per channel: Interference voltage suppression for interference frequency f1 in Hz | 16,67 / 50 / 60 / 3 600 |
| Integration and conversion time/resolution per channel: Conversion time (per channel) | 60.8 ms / 20.8 ms / 17.5 ms / 1.1 ms |
| Smoothing of measured values: parameterizable | Yes |
| Smoothing of measured values: Step: None | Yes; 1x cycle time |
| Smoothing of measured values: Step: low | Yes; 4x cycle time |
| Smoothing of measured values: Step: Medium | Yes; 16x cycle time |
| Smoothing of measured values: Step: High | Yes; 64x cycle time |
| Connection of signal encoders: for voltage measurement | Yes |
|---|
| Linearity error (relative to input range), (+/-) | 0.0075 % |
|---|---|
| Temperature error (relative to input range), (+/-) | 0.00075 %/K |
| Crosstalk between the inputs, min. | -70 dB |
| Repeat accuracy in steady state at 25 °C (relative to input range), (+/-) | 0.004 % |
| Operational error limit in overall temperature range: Voltage, relative to input range, (+/-) | 0.1 % |
| Basic error limit (operational limit at 25 °C): Voltage, relative to input range, (+/-) | 0.075 % |
| Interference voltage suppression for f = n x (f1 +/- 0.5 %), f1 = interference frequency: Series mode interference (peak value of interference < rated value of input range), min. | 60 dB |
| Diagnostics function | Yes |
|---|---|
| Alarms: Diagnostic alarm | Yes; Parameterizable |
| Alarms: Hardware interrupt | Yes; (limit value alarm), can be parameterized for channel 0 |
| Diagnoses: Diagnostic information readable | Yes |
| Diagnoses: Wire break | Yes; at 1 to 5 V |
| Diagnoses: short-circuit | Yes; at 1 to 5 V |
| Diagnostics indication LED: Group error SF (red) | Yes |
| Potential separation analog inputs: between the channels | No |
|---|---|
| Potential separation analog inputs: between the channels and backplane bus | Yes |
| Between the inputs and MANA (UCM) | 10 Vpp AC |
|---|
| Isolation tested with | 707 V DC (type test) |
|---|
| Width | 45 mm |
|---|---|
| Height | 130 mm |
| Depth | 35 mm |
| Weight, approx. | 150 g |
|---|
| ETIM | 8 EC001596 |
|---|---|
| IDEA | 4 3562 |
| UNSPSC | 15 32-15-17-05 |
| Net weight | 0.177 kg |
|---|---|
| Country of origin | DE |
| Shipping weight | 0.677 kg |
| Ships from | Türkiye |
| Dispatch | — |
| Stock | On request |
Source: manufacturer data · Last verified: 01 Nov 2026
No documents are on file for this part yet.
Ask us for the datasheetThe rated operational voltage of 6ES7144-4FF01-0AB0 is 24 V AC.
The tariff (HS) code on file for 6ES7144-4FF01-0AB0 is 85389091.
The EAN (GTIN) of 6ES7144-4FF01-0AB0 is 4047623403227.
6ES7144-4FF01-0AB0 ships from Türkiye. Shipping calculated at checkout · import duties and taxes paid on arrival.
PLC selection guide for engineers covering IEC 61131 compliance, Siemens, Rockwell, Schneider, ABB comparison, scan time sizing, and wiring. Shop at Stoklink.
Learn how a PLC works, including scan cycle, I/O sizing, IEC 61131-3 programming, and hardware selection for ABB, Schneider, and Siemens. Shop at Stoklink.
Master PLC system components: CPU, power supply, I/O modules, communication interfaces, and software with sizing formulas and selection tips. Shop at Stoklink.