Part number
6ES7141-6BG00-0BB0
$373.64 On request Dispatch — · From TürkiyeGet a Quote
SIMATIC ET 200eco

Siemens 6ES7141-6BG00-0BB0 SIMATIC ET 200eco PN DI 8x24VDC M12-L IP67/IP69K Remote I/O Module

SIMATIC ET 200eco PN digital input module, 8x 24V DC, PROFINET M12-L, IP65/67/69K, S2 redundancy.

Rated operational voltage
24 V AC
Communication
PROFINET IO, EtherNet/IP, Modbus TCP, MRP
EAN
4047623410881
Description

About the 6ES7141-6BG00-0BB0

The Siemens 6ES7141-6BG00-0BB0 is a SIMATIC ET 200eco PN digital input module with 8 channels of 24 V DC input, wired through 2x M12-L PROFINET ports plus M12 I/O connectors in an IP65/67/69K housing rated for washdown environments. It runs isochronous mode down to a 250 microsecond cycle and supports PROFINET S2 system redundancy with MRP media redundancy.

Selection Notes

Choose this DI module over a DIN-rail ET 200SP station when the sensors sit on the machine itself: the M12-L PROFINET ports and IP65/67/69K housing let it mount in the field, including washdown areas, without a junction box. PROFINET S2 system redundancy and MRP media redundancy make it a fit for lines that cannot tolerate a single controller or cable-break failure; skip that overhead on a simple standalone cell. The module is suitable for safety-related tripping of standard modules to PL d / SIL 2 from firmware FS01, so a fail-safe CPU can switch a standard sensor channel through it without a dedicated F-DI module.

Applications

Field-mounted digital sensor input on PROFINET networks - proximity switches, limit switches, and photoelectric sensors on conveyors and machine cells where washdown protection or network redundancy is required.

Specification

Full specification

159 values · Last verified 01 Nov 2026

General information 17

HW functional status FS05
Firmware version V5.1.x
FW update possible Yes
Vendor identification (VendorID) 002 AH
Device identifier (DeviceID) 0306 H
Manufacturer ID according to ODVA (VendorID) 04E3H
Device ID according to ODVA (Product code) 0FA4H
Product function: I&M data Yes; I&M0 to I&M3
Product function: Isochronous mode Yes
Product function: IRT Yes
Product function: Prioritized startup Yes
Engineering with: STEP 7 TIA Portal configurable/integrated from version STEP 7 V17 or higher with HSP 0363
Engineering with: PROFINET from GSD version/GSD revision GSDML V2.4.x
Engineering with: Multi Fieldbus Configuration Tool (MFCT) from V1.3 SP1
Operating mode: DI Yes
Operating mode: Counter No
Operating mode: MSI Yes

Supply voltage 5

power supply according to NEC Class 2 required No
Load voltage 1L+: Rated value (DC) 24 V
Load voltage 1L+: permissible range, lower limit (DC) 20.4 V
Load voltage 1L+: permissible range, upper limit (DC) 28.8 V
Load voltage 1L+: Reverse polarity protection Yes; Against destruction; encoder power supply outputs applied with reversed polarity

Input current 3

Current consumption (rated value) 85 mA; without load
from load voltage 1L+ (unswitched voltage) 12 A; Maximum value
from load voltage 2L+, max. 12 A; Maximum value
Show all 159 specifications ↓ Show less ↑134 more values in Identification, Encoder supply, Power loss, Address area, Hardware configuration, Digital inputs, Encoder, Interfaces, 1. Interface, Interface types, Protocols, Isochronous mode, Interrupts/diagnostics/status information, Potential separation, Isolation, Degree and class of protection, Standards, approvals, certificates, Security, Ambient conditions, Connection method, Dimensions, Weights, Version Classification, General Product Approval For use in hazardous locations, Logistics.

Identification 9

Part number 6ES7141-6BG00-0BB0
Brand Siemens
Condition New, factory sealed
Source Siemens and its authorised distributors
Warranty Manufacturer warranty
Lifecycle status Active, in production
EAN 4047623410881
ETIM class EC001599
eCl@ss 27242604

Encoder supply 3

Number of outputs 8
24 V encoder supply: Short-circuit protection Yes; per channel, electronic
24 V encoder supply: Output current, max. 100 mA; per output

Power loss 1

Power loss, typ. 7.6 W

Address area 1

Address space per module: Inputs 1 byte; + 1 byte for QI information

Hardware configuration 1

Submodules: Number of configurable submodules, max. 2

Digital inputs 11

Number of digital inputs 8
Digital inputs, parameterizable Yes
Sourcing/sinking input P-reading
Input characteristic curve in accordance with IEC 61131, type 3 Yes
Number of simultaneously controllable inputs all mounting positions: up to 60 °C, max. 8
Input voltage: Rated value (DC) 24 V
Input voltage: for signal "0" -30 to +5 V
Input voltage: for signal "1" +11 to +30V
Input current: for signal "1", typ. 2.4 mA
Input delay (for rated value of input voltage) for standard inputs: parameterizable Yes; 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms
Cable length: unshielded, max. 30 m

Encoder 2

Connectable encoders: 2-wire sensor Yes
Connectable encoders: permissible quiescent current (2-wire sensor), max. 1.5 mA

Interfaces 2

Transmission procedure 100BASE-TX
Number of PROFINET interfaces 1

1. Interface 9

Interface type PROFINET with 100 Mbit/s full duplex (100BASE-TX)
Interface types: M12 port Yes; 2x M12, 4-pin, D-coded
Interface types: Number of ports 2
Interface types: integrated switch Yes
Protocols: PROFINET IO Device Yes
Protocols: Open IE communication Yes
PROFINET IO Device Services: IRT Yes; 250 µs to 4 ms in 125 µs frame
PROFINET IO Device Services: Prioritized startup Yes
PROFINET IO Device Services: Shared device Yes

Interface types 3

M12 port: Autonegotiation Yes
M12 port: Autocrossing Yes
M12 port: Transmission rate, max. 100 Mbit/s

Protocols 36

Supports protocol for PROFINET IO Yes
PROFIsafe No
EtherNet/IP Yes
Modbus TCP Yes
Redundancy mode: PROFINET system redundancy (S2) Yes
Redundancy mode: on S7-1500R/H Yes
Redundancy mode: on S7-400H Yes
Redundancy mode: PROFINET system redundancy (R1) No
Redundancy mode: H-Sync forwarding Media redundancy Yes
Redundancy mode: MRP Yes
Redundancy mode: MRPD No
EtherNet/IP Services: CIP Implicit Messaging Yes
EtherNet/IP Services: CIP Explicit Messaging Yes
EtherNet/IP Services: CIP Safety No
EtherNet/IP Services: Shared device Yes; 2x EtherNet/IP Scanner
EtherNet/IP Services: Number of scanners with shared device, max. Updating times 2
EtherNet/IP Services: Requested Packet Interval (RPI) Redundancy mode 2 ms
EtherNet/IP Services: DLR (Device Level Ring) Address area No
EtherNet/IP Services: Address space per module, max. 20 byte
EtherNet/IP Services: LargeForwardOpen (Class3) No
Modbus TCP Services: read coils (code=1) Yes
Modbus TCP Services: read discrete inputs (code=2) Yes
Modbus TCP Services: Read Holding Registers (Code=3) Yes
Modbus TCP Services: write single coil (code=5) Yes
Modbus TCP Services: write multiple coils (code=15) Yes
Modbus TCP Services: Write Multiple Registers (Code=16) Yes
Modbus TCP Services: Parameter change by master No
Modbus TCP Services: Modbus TCP Security Protocol Address space per station No
Modbus TCP Services: Address space per station, max. 20 byte
Modbus TCP Services: Access-consistent address space Updating time 2 byte
Modbus TCP Services: I/O request interval Connections 2 ms
Modbus TCP Services: number of connections per device 12
Open IE communication: TCP/IP Yes; (only EtherNet/IP or Modbus TCP)
Open IE communication: SNMP Yes
Open IE communication: LLDP Yes
Open IE communication: ARP Yes

Isochronous mode 4

Equidistance Yes
shortest clock pulse 250 µs
max. cycle 4 ms
Jitter, max. 10 µs

Interrupts/diagnostics/status information 17

Alarms: Diagnostic alarm Yes; Parameterizable
Alarms: Maintenance interrupt Yes; Parameterizable
Alarms: Hardware interrupt Yes; Parameterizable
Diagnoses: Diagnostic information readable Yes
Diagnoses: Monitoring the supply voltage Yes
Diagnoses: parameterizable Yes
Diagnoses: Wire break Yes; DI, input current < 0.3 mA, per channel
Diagnoses: Short-circuit encoder supply Yes; Per channel group
Diagnostics indication LED: RUN LED Yes; green LED
Diagnostics indication LED: ERROR LED Yes; red LED
Diagnostics indication LED: MAINT LED Yes; Yellow LED
Diagnostics indication LED: NS LED Yes; green/red LED
Diagnostics indication LED: MS LED Yes; green/red LED
Diagnostics indication LED: IO LED Yes; red/green/yellow LEDs
Diagnostics indication LED: Channel status display Yes; green LED
Diagnostics indication LED: for channel diagnostics Yes; red LED
Diagnostics indication LED: Connection display LINK TX/RX Yes; green LED, only link

Potential separation 4

between the load voltages Yes
between Ethernet and electronics Yes
Potential separation channels: between the channels No
Potential separation channels: between the channels and the power supply of the electronics No

Isolation 2

tested with: 24 V DC circuits 707 V DC (type test)
tested with: Test voltage for interface, rms value [Vrms] 1 500 V; According to IEEE 802.3

Degree and class of protection 1

IP degree of protection IP65/67/69K

Standards, approvals, certificates 4

Suitable for safety-related tripping of standard modules Yes; from FS01
Highest safety class achievable for safety-related tripping of standard modules: Performance level according to ISO 13849-1 PL d
Use in hazardous areas: Explosion protection category for gas ATEX, UKEX, IECEx, CCCEx for Zone 2
Use in hazardous areas: Explosion protection category for dust ATEX, UKEX, IECEx, CCCEx for Zone 22

Security 2

signed firmware update Yes
securely removing data Yes

Ambient conditions 3

Ambient temperature during operation: min. -40 °C
Ambient temperature during operation: max. 60 °C
Altitude during operation relating to sea level: Ambient air temperature-barometric pressure-altitude Up to max. 5 000 m, at installation height > 2 000 m additional restrictions

Connection method 3

Design of electrical connection 4/5-pin M12 circular connectors
Design of electrical connection for the inputs and outputs M12, 5-pin, A-coded
Design of electrical connection for supply voltage M12, 4-pin, L-coded

Dimensions 3

Width 45 mm
Height 200 mm
Depth 48 mm

Weights 1

Weight, approx. 780 g

Version Classification 4

eClass 16 27-24-26-04
ETIM 10 EC001599
IDEA 4 3566
UNSPSC 15 32-15-17-05

General Product Approval For use in hazardous locations 2

China RoHS Manufacturer Declara- CCC-Ex tion Food, Pharmaceut-
For use in hazardous locations Maritime application other ical, Medical

Logistics 6

Net weight 0.813 kg
Country of origin DE
Shipping weight 1.313 kg
Ships from Türkiye
Dispatch —
Stock On request

Source: manufacturer data · Last verified: 01 Nov 2026

Documents

Documents for 6ES7141-6BG00-0BB0

No documents are on file for this part yet.

Ask us for the datasheet
Quick answers

Questions about the 6ES7141-6BG00-0BB0

Which supply voltage is 6ES7141-6BG00-0BB0 rated for?

The rated operational voltage of 6ES7141-6BG00-0BB0 is 24 V AC.

What is the HS code of 6ES7141-6BG00-0BB0 for customs?

The tariff (HS) code on file for 6ES7141-6BG00-0BB0 is 85389091.

What is the EAN of 6ES7141-6BG00-0BB0?

The EAN (GTIN) of 6ES7141-6BG00-0BB0 is 4047623410881.

Where does 6ES7141-6BG00-0BB0 ship from, and how fast?

6ES7141-6BG00-0BB0 ships from Türkiye. Shipping calculated at checkout · import duties and taxes paid on arrival.

Guides

Guides for PLC & controllers

All guides for PLC & controllers
Reviews

Customer reviews

Series

Siemens SIMATIC ET 200eco

Brand
Siemens
Series
SIMATIC ET 200eco
$373.64 On request
Get a Quote
Quote

Get a Quote

Genuine parts

Genuine, factory-sealed parts

Siemens · 6ES7141-6BG00-0BB0

Every part on Stoklink is new, unused and made by the manufacturer named on the page.

Condition
New and unused, in the manufacturer's factory-sealed packaging.
Sourced from
Siemens and its authorised distributors.
Warranty
The manufacturer's warranty applies.
If a part is not genuine
We refund the full amount.

Added to cart Could not add to cart

View cart