Programmable Logic Controller Guide: Selection, Application, and Maintenance for Engineers
PLC selection guide for engineers covering IEC 61131 compliance, Siemens, Rockwell, Schneider, ABB comparison, scan time sizing, and wiring. Shop at Stoklink.
The Siemens 6ES7141-4BF00-0AB0 is a SIMATIC ET 200pro digital input module, EM 8DI 24V DC High Feature, with 8 sink-type (P-reading) channels, per-channel wire-break and short-circuit diagnostics, and a parameterizable input delay from 0.5 to 20 ms. It runs on a 24 V DC supply and requires the connection module 6ES7194-4..00-0AA0 ordered separately.
The High Feature (HF) designation is why to choose this module over a Standard-Feature 8DI module: it adds per-channel wire-break and short-circuit diagnostics with a parameterizable 0.5/3/15/20 ms input delay, so a fault is isolated to one sensor rather than reported at module level. The 8 electronically short-circuit-protected encoder supply outputs let 2-wire sensors draw power directly from the module instead of a separate 24 V distribution block. The connection module 6ES7194-4..00-0AA0 must be ordered separately; only the electronic module and bus module are included here.
Digital sensor and limit switch wiring on a SIMATIC ET 200pro DIN-rail or field-mounted station where per-channel fault isolation to a specific sensor is needed.
| Rated value (DC) | 24 V |
|---|---|
| Reverse polarity protection | Yes; against destruction; load increasing |
| from supply voltage 1L+, max. | 40 mA |
|---|---|
| from backplane bus 3.3 V DC, max. | 20 mA |
| Number of outputs | 8 |
|---|---|
| Short-circuit protection | Yes; per channel, electronic |
| Output current: up to 55 °C, max. | 1 A |
| Part number | 6ES7141-4BF00-0AB0 |
|---|---|
| Brand | Siemens |
| Condition | New, factory sealed |
| Source | Siemens and its authorised distributors |
| Warranty | Manufacturer warranty |
| Lifecycle status | Active, in production |
| EAN | 4025515072584 |
| ETIM class | EC001599 |
| eCl@ss | 27242604 |
| Power loss, typ. | 2.5 W |
|---|
| Address space per module: Address space per module, max. | 1 byte |
|---|
| Number of digital inputs | 8 |
|---|---|
| Sourcing/sinking input | P-reading |
| Input characteristic curve in accordance with IEC 61131, type 1 | No |
| Number of simultaneously controllable inputs all mounting positions: up to 55 °C, max. | 8 |
| Input voltage: Rated value (DC) | 24 V |
| Input voltage: for signal "0" | -3 to +5V |
| Input voltage: for signal "1" | +11 to +30V |
| Input current: for signal "1", typ. | 7 mA |
| Input delay (for rated value of input voltage) for standard inputs: parameterizable | Yes |
| Cable length: unshielded, max. | 30 m |
| Connectable encoders: 2-wire sensor | Yes |
|---|---|
| Connectable encoders: permissible quiescent current (2-wire sensor), max. | 1.5 mA |
| Diagnostics function | Yes; channel by channel, parameterizable |
|---|---|
| Alarms: Diagnostic alarm | Yes |
| Alarms: Hardware interrupt | Yes |
| Diagnoses: Diagnostic information readable | Yes |
| Diagnoses: Wire break | Yes; Monitoring, I < 0.3 mA; per channel |
| Diagnoses: Short-circuit | Yes; channel by channel |
| Diagnostics indication LED: Group error SF (red) | Yes |
| Diagnostics indication LED: Status indicator digital input (green) | Yes; Per channel |
| between backplane bus and all other circuit components | Yes |
|---|---|
| Potential separation digital inputs: between the channels | No |
| Potential separation digital inputs: between the channels and backplane bus | Yes |
| Isolation tested with | 707 V DC (type test) |
|---|
| Width | 45 mm |
|---|---|
| Height | 130 mm |
| Depth | 35 mm; without terminal module |
| Weight, approx. | 140 g |
|---|
| Net weight | 0.18 kg |
|---|---|
| Country of origin | DE |
| Shipping weight | 0.68 kg |
| Ships from | Türkiye |
| Dispatch | — |
| Stock | On request |
Source: manufacturer data · Last verified: 01 Nov 2026
No documents are on file for this part yet.
Ask us for the datasheetThe rated operational voltage of 6ES7141-4BF00-0AB0 is 24 V AC.
The tariff (HS) code on file for 6ES7141-4BF00-0AB0 is 85389091.
The EAN (GTIN) of 6ES7141-4BF00-0AB0 is 4025515072584.
6ES7141-4BF00-0AB0 ships from Türkiye. Shipping calculated at checkout · import duties and taxes paid on arrival.
PLC selection guide for engineers covering IEC 61131 compliance, Siemens, Rockwell, Schneider, ABB comparison, scan time sizing, and wiring. Shop at Stoklink.
Learn how a PLC works, including scan cycle, I/O sizing, IEC 61131-3 programming, and hardware selection for ABB, Schneider, and Siemens. Shop at Stoklink.
Master PLC system components: CPU, power supply, I/O modules, communication interfaces, and software with sizing formulas and selection tips. Shop at Stoklink.