Part number
6ES7138-7BB00-0AB0
Model no
Watchdog module
$282.56 On request Dispatch — · From TürkiyeGet a Quote
SIMATIC ET 200SP

Siemens 6ES7138-7BB00-0AB0 SIMATIC ET 200iSP Watchdog Module Ex ib IIC T4 Remote I/O Accessory

SIMATIC ET200iSP watchdog module for power-bus group-fault monitoring, Ex ib IIC T4 Gb, 24V DC, IP30.

Product type designation
Watchdog module
HW functional status
4
Firmware version
V1.0.2
EAN
4019169149105
Description

About the Watchdog module

The Siemens 6ES7138-7BB00-0AB0 is a watchdog module for the SIMATIC ET 200iSP intrinsically safe I/O station, monitoring the connected digital output modules on the power bus and reporting a group fault through its red SF LED. It runs from a 20.4-28.8 V DC supply, mounts on rail, front, or wall, and is rated IP30 with Ex ib IIC T4 Gb / Ex ib I Mb approval for Zone 1 gas and Group I mining areas.

Certifications & Standards

  • GL
  • ABS
  • BV
  • DNV

Selection Notes

This module has no digital inputs or fieldbus interfaces of its own; its job is watchdog supervision of the ET 200iSP power bus, so it is needed only when the station includes digital output modules whose power-bus feed must be monitored for a stuck or failed watchdog cycle. Its Ex ib IIC T4 Gb / Ex ib I Mb rating covers both surface gas Zone 1 installations and underground Group I mining areas from the same catalog number. The four marine class approvals (GL, ABS, BV, DNV) make it usable on shipboard hazardous-area I/O stations without a separate maritime-rated variant.

Specification

Full specification

73 values · Last verified 01 Nov 2026

General information 3

Product type designation Watchdog module
HW functional status 4
Firmware version V1.0.2

Installation type/mounting 4

Rack mounting No
Front mounting Yes
Rail mounting Yes
Wall mounting/direct mounting Yes

Supply voltage 3

Type of supply voltage DC
permissible range, lower limit (DC) 20.4 V
permissible range, upper limit (DC) 28.8 V
Show all 73 specifications ↓ Show less ↑63 more values in Identification, Input current, Power loss, Hardware configuration, Digital inputs, Interfaces, Protocols, Interrupts/diagnostics/status information, Ex(i) characteristics, Potential separation, Permissible potential difference, Degree and class of protection, Standards, approvals, certificates, Connection method, Dimensions, Logistics.

Identification 10

Part number 6ES7138-7BB00-0AB0
Type designation Watchdog module
Brand Siemens
Condition New, factory sealed
Source Siemens and its authorised distributors
Warranty Manufacturer warranty
Lifecycle status Active, in production
EAN 4019169149105
ETIM class EC001599
eCl@ss 27242604

Input current 1

from load voltage (power bus), max. 2 mA * number of connected digital output modules

Power loss 1

Power loss, typ. 50 mW

Hardware configuration 1

Fieldbus connection via separate transceiver Yes

Digital inputs 1

Number of digital inputs 0

Interfaces 2

Number of PROFINET interfaces 0
Number of RS 485 interfaces 0

Protocols 3

Supports protocol for PROFINET IO No
PROFIsafe No
PROFIBUS No

Interrupts/diagnostics/status information 3

Diagnoses: Diagnostic information readable Yes
Diagnostics indication LED: Group error SF (red) Yes
Diagnostics indication LED: Status indicator digital input (green) Yes

Ex(i) characteristics 6

Module for Ex(i) protection Yes; for more Co/Lo combinations, see certificate IECEx KEM 06.0026
maximum values for connecting terminals for gas group IIC: Uo (no-load voltage), max. 12.7 V
maximum values for connecting terminals for gas group IIC: Io (short-circuit current), max. 329 mA
maximum values for connecting terminals for gas group IIC: Po (power output), max. 0.91 W
maximum values for connecting terminals for gas group IIC: Co (permissible external capacity), max. 1 µF
maximum values for connecting terminals for gas group IIC: Lo (permissible external inductivity), max. 0.3 mH

Potential separation 2

between the channels and backplane bus Yes
between channels and powerbus Yes

Permissible potential difference 1

between different circuits 60 V DC/30 V AC

Degree and class of protection 1

IP degree of protection IP30

Standards, approvals, certificates 21

CE mark CE 0344
UKCA mark DEKRA 21UKEX0028 Importer UK: Siemens plc Manchester M20 2UR
cULus LISTED E334384
FM approval CLASSIFIED 3025852
Suitable for safety functions No
INMETRO certificate UL-BR 12.0075
reference designation according to IEC 81346-2 (2009) K
Use in hazardous areas: ATEX marking II 2 G Ex ib IIC T4 Gb I M2 Ex ib I Mb
Use in hazardous areas: ATEX certificate KEMA 06 ATEX 0086
Use in hazardous areas: IECEx IECEx KEM 06.0026
Use in hazardous areas: CCC Ex 2020322316002993
Use in hazardous areas: EAC Ex 1Ex ib IIC T4 Gb PB Ex ib I Mb
Use in hazardous areas: FM marking Class I, Zone 1 AEx ib IIC T4 Ex ib IIC T4 NI, Class I, Division 2, GP. A,B,C,D T4 DIP, Class II, III, GP. E,F,G
Use in hazardous areas: Explosion protection category for gas ATEX gas explosion protection, Zone 1
Use in hazardous areas: Explosion protection category for dust No
Use in hazardous areas: associated equipment (Ex ia) No
Use in hazardous areas: associated equipment (Ex ib) Yes
Marine approval: Germanischer Lloyd (GL) Yes
Marine approval: American Bureau of Shipping (ABS) Yes
Marine approval: Bureau Veritas (BV) Yes
Marine approval: Det Norske Veritas (DNV) Yes

Connection method 1

Design of electrical connection Screw/spring-type terminal

Dimensions 3

Width 30 mm
Height 129 mm
Depth 136.5 mm

Logistics 6

Net weight 0.253 kg
Country of origin DE
Shipping weight 0.753 kg
Ships from Türkiye
Dispatch —
Stock On request

Source: manufacturer data · Last verified: 01 Nov 2026

Documents

Documents for 6ES7138-7BB00-0AB0

No documents are on file for this part yet.

Ask us for the datasheet
Certifications

Certifications and standards

  • ATEX
  • Germanischer Lloyd (GL)
  • American Bureau of Shipping (ABS)
  • Bureau Veritas (BV)
  • Det Norske Veritas (DNV)
Quick answers

Questions about the Watchdog module

What is the HS code of Watchdog module for customs?

The tariff (HS) code on file for Watchdog module is 85389091.

What is the EAN of Watchdog module?

The EAN (GTIN) of Watchdog module is 4019169149105.

Where does Watchdog module ship from, and how fast?

Watchdog module ships from Türkiye. Shipping calculated at checkout · import duties and taxes paid on arrival.

Guides

Guides for PLC & controllers

All guides for PLC & controllers
Reviews

Customer reviews

Series

Siemens SIMATIC ET 200SP

Brand
Siemens
Series
SIMATIC ET 200SP
$282.56 On request
Get a Quote
Quote

Get a Quote

Watchdog module

Genuine parts

Genuine, factory-sealed parts

Siemens · 6ES7138-7BB00-0AB0

Every part on Stoklink is new, unused and made by the manufacturer named on the page.

Condition
New and unused, in the manufacturer's factory-sealed packaging.
Sourced from
Siemens and its authorised distributors.
Warranty
The manufacturer's warranty applies.
If a part is not genuine
We refund the full amount.

Added to cart Could not add to cart

View cart