Programmable Logic Controller Guide: Selection, Application, and Maintenance for Engineers
PLC selection guide for engineers covering IEC 61131 compliance, Siemens, Rockwell, Schneider, ABB comparison, scan time sizing, and wiring. Shop at Stoklink.
- Part number
- 6ES7132-7RD11-0AB0
- Model no
- 4DQ 17.4 V DC/27 mA
- ATEX
SIMATIC ET 200SPSiemens 6ES7132-7RD11-0AB0 SIMATIC ET 200iSP 4DQ 17.4VDC/27mA H-Shutdown Ex ib Remote I/O Module
SIMATIC ET200iSP intrinsically safe 4DQ module, 17.4VDC/27mA, Ex ib, H-shutdown, IP30.
Description
About the 4DQ 17.4 V DC/27 mA
About the 4DQ 17.4 V DC/27 mA
The Siemens 6ES7132-7RD11-0AB0 is a SIMATIC ET 200iSP electronic module with 4 intrinsically safe digital outputs rated 17.4 V DC at 27 mA, built for Ex ib (ia Ga) IIC T4 Gb gas zones and Ex ib [ia IIIC Da] IIC T4 Gb dust zones with an H-shutdown input circuit. It mounts on the ET200iSP rail with screw or spring terminals and IP30 protection.
Certifications & Standards
- GL
- ABS
- BV
- DNV
Selection Notes
Electrically this module matches the L-shutdown 17.4 V/27 mA variant point for point - same Uao, Ri, and Uo/Io/Po loop values - and differs only in carrying the H-shutdown input circuit instead of L. Choose between the two strictly by which shutdown-circuit threshold the safety loop documentation calls for; the output-side wiring and Ex loop calculations are identical either way. The two-output parallel-switching option for uprating still applies.
Specification
Full specification
General information 3
| Product type designation | 4DQ 17.4 V DC/27 mA |
|---|---|
| HW functional status | 7 |
| Firmware version | V3.0.0 |
Installation type/mounting 4
| Rack mounting | No |
|---|---|
| Front mounting | Yes |
| Rail mounting | Yes |
| Wall mounting/direct mounting | No |
Supply voltage 1
| Type of supply voltage | DC |
|---|
Show all 96 specifications ↓ Show less ↑88 more values in Identification, Input current, Power loss, Address area, Hardware configuration, Digital outputs, Interfaces, Protocols, Interrupts/diagnostics/status information, Ex(i) characteristics, Potential separation, Degree and class of protection, Standards, approvals, certificates, Connection method, Dimensions, Weights, Logistics.
Identification 10
| Part number | 6ES7132-7RD11-0AB0 |
|---|---|
| Type designation | 4DQ 17.4 V DC/27 mA |
| Brand | Siemens |
| Condition | New, factory sealed |
| Source | Siemens and its authorised distributors |
| Warranty | Manufacturer warranty |
| Lifecycle status | Active, in production |
| EAN | 4019169150217 |
| ETIM class | EC001599 |
| eCl@ss | 27242604 |
Input current 2
| Current consumption, typ. | 260 mA |
|---|---|
| from load voltage (power bus), max. | 300 mA |
Power loss 1
| Power loss, typ. | 2.1 W |
|---|
Address area 1
| Address space per module: Address space per module, max. | 2 byte |
|---|
Hardware configuration 1
| Fieldbus connection via separate transceiver | Yes |
|---|
Digital outputs 16
| Type of digital output | Transistor |
|---|---|
| Number of digital outputs | 4; additionally 1 intrinsically-safe input for H shutdown |
| Short-circuit protection | Yes |
| No-load voltage Uao (DC) | 17.4 V |
| Internal resistor Ri | 150 Ω |
| Trend key points E: Voltage Ue (DC) | 13.3 V |
| Trend key points E: Current Ie | 27 mA |
| Output voltage: Type of output voltage | DC |
| Output current: for signal "1" rated value | 0.027 A |
| Output delay with resistive load: "0" to "1", max. | 2 ms |
| Output delay with resistive load: "1" to "0", max. | 1.5 ms |
| Parallel switching of two outputs: for uprating | Yes |
| Switching frequency: with resistive load, max. | 100 Hz |
| Switching frequency: with inductive load, max. | 2 Hz |
| Cable length: shielded, max. | 500 m |
| Cable length: unshielded, max. | 500 m |
Interfaces 2
| Number of PROFINET interfaces | 0 |
|---|---|
| Number of RS 485 interfaces | 0 |
Protocols 3
| Supports protocol for PROFINET IO | No |
|---|---|
| PROFIsafe | No |
| PROFIBUS | No |
Interrupts/diagnostics/status information 8
| Diagnostics function | Yes |
|---|---|
| Alarms: Diagnostic alarm | Yes; Parameterizable |
| Alarms: Hardware interrupt | No |
| Diagnoses: Diagnostic information readable | Yes |
| Diagnoses: Wire break | Yes |
| Diagnoses: Short-circuit | Yes |
| Diagnostics indication LED: Group error SF (red) | Yes |
| Diagnostics indication LED: Status indicator digital output (green) | Yes |
Ex(i) characteristics 9
| Module for Ex(i) protection | Yes; for more Co/Lo combinations, see certificate IECEx KEM 05.0011 |
|---|---|
| maximum values for connecting terminals for gas group IIC: Uo (no-load voltage), max. | 19.4 V |
| maximum values for connecting terminals for gas group IIC: Io (short-circuit current), max. | 132 mA |
| maximum values for connecting terminals for gas group IIC: Po (power output), max. | 0.64 W |
| maximum values for connecting terminals for gas group IIC: Co (permissible external capacity), max. | 0.23 µF |
| maximum values for connecting terminals for gas group IIC: Lo (permissible external inductivity), max. | 1.9 mH |
| maximum values for connecting terminals for gas group IIC: Ui (intrinsically safe input voltage), max. | 28 V; switch input circuit |
| maximum values for connecting terminals for gas group IIC: Pi (intrinsically safe input power), max. | 1.2 W; switch input circuit |
| maximum values for connecting terminals for gas group IIC: Ci (internal capacity), max. | 3 nF; switch input circuit |
Potential separation 2
| Potential separation digital outputs: between the channels | No |
|---|---|
| Potential separation digital outputs: between the channels and backplane bus | Yes |
Degree and class of protection 1
| IP degree of protection | IP30 |
|---|
Standards, approvals, certificates 21
| CE mark | CE 0344 |
|---|---|
| UKCA mark | DEKRA 21UKEX0085 Importer UK: Siemens plc Manchester M20 2UR |
| cULus | LISTED E334384 |
| FM approval | CLASSIFIED 3025852 |
| Suitable for safety functions | No |
| INMETRO certificate | UL-BR 12.0073 |
| reference designation according to IEC 81346-2 (2009) | K |
| Use in hazardous areas: ATEX marking | II 2 G (1) G Ex ib [ia Ga] IIC T4 Gb II 2 G (1) D Ex ib [ia IIIC Da] IIC T4 Gb I M2 Ex ib [ia] I Mb |
| Use in hazardous areas: ATEX certificate | KEMA 04 ATEX 1249 |
| Use in hazardous areas: IECEx | IECEx KEM 05.0011 |
| Use in hazardous areas: CCC Ex | 2020322316002945 |
| Use in hazardous areas: EAC Ex | PB Ex ib [ia] I Mb 1Ex ib [ia Ga] IIC T4 Gb [Ex ia Da] IIIC |
| Use in hazardous areas: FM marking | Class I, Zone 1 AEx ib [ia] IIC T4 Ex ib IIC T4 NI, Class I, DIV.2, GP. A,B,C,D T4 AIS, Class I, DIV.1, GP. A,B,C,D T4 DIP Class II, III, GP. E,F,G |
| Use in hazardous areas: Explosion protection category for gas | ATEX gas explosion protection, Zone 1 |
| Use in hazardous areas: Explosion protection category for dust | ATEX dust explosion protection, Zone 21 always install in corresponding enclosure |
| Use in hazardous areas: associated equipment (Ex ia) | Yes |
| Use in hazardous areas: associated equipment (Ex ib) | Yes |
| Marine approval: Germanischer Lloyd (GL) | Yes |
| Marine approval: American Bureau of Shipping (ABS) | Yes |
| Marine approval: Bureau Veritas (BV) | Yes |
| Marine approval: Det Norske Veritas (DNV) | Yes |
Connection method 1
| Design of electrical connection | Screw/spring-type terminal |
|---|
Dimensions 3
| Width | 30 mm |
|---|---|
| Height | 129 mm |
| Depth | 136.5 mm |
Weights 1
| Weight, approx. | 255 g |
|---|
Logistics 6
| Net weight | 0.341 kg |
|---|---|
| Country of origin | DE |
| Shipping weight | 0.841 kg |
| Ships from | Türkiye |
| Dispatch | — |
| Stock | On request |
Source: manufacturer data · Last verified: 01 Nov 2026
Documents
Documents for 6ES7132-7RD11-0AB0
No documents are on file for this part yet.
Ask us for the datasheet
Certifications
Certifications and standards
- ATEX
- Germanischer Lloyd (GL)
- American Bureau of Shipping (ABS)
- Bureau Veritas (BV)
- Det Norske Veritas (DNV)
Quick answers
Questions about the 4DQ 17.4 V DC/27 mA
What is the rated current of 4DQ 17.4 V DC/27 mA?
The rated current of 4DQ 17.4 V DC/27 mA is 0.027 A.
What is the HS code of 4DQ 17.4 V DC/27 mA for customs?
The tariff (HS) code on file for 4DQ 17.4 V DC/27 mA is 85389091.
What is the EAN of 4DQ 17.4 V DC/27 mA?
The EAN (GTIN) of 4DQ 17.4 V DC/27 mA is 4019169150217.
Where does 4DQ 17.4 V DC/27 mA ship from, and how fast?
4DQ 17.4 V DC/27 mA ships from Türkiye. Shipping calculated at checkout · import duties and taxes paid on arrival.
Guides
Guides for PLC & controllers
What Is a Programmable Logic Controller and How Does It Work
Learn how a PLC works, including scan cycle, I/O sizing, IEC 61131-3 programming, and hardware selection for ABB, Schneider, and Siemens. Shop at Stoklink.
Main Components of a PLC System: Complete Guide for Engineers
Master PLC system components: CPU, power supply, I/O modules, communication interfaces, and software with sizing formulas and selection tips. Shop at Stoklink.
Reviews
Customer reviews
Series
Siemens SIMATIC ET 200SP
- Brand
- Siemens
- Series
- SIMATIC ET 200SP
