Programmable Logic Controller Guide: Selection, Application, and Maintenance for Engineers
PLC selection guide for engineers covering IEC 61131 compliance, Siemens, Rockwell, Schneider, ABB comparison, scan time sizing, and wiring. Shop at Stoklink.
- Part number
- 6ES7132-6MD00-0BB1
- Model no
- RQ 4x120 V DC ... 230 V AC/5 A NO MA ST
SIMATIC ET 200SPSiemens 6ES7132-6MD00-0BB1 SIMATIC ET 200SP RQ NO-MA 4x120VDC-230VAC/5A ST Module
SIMATIC ET 200SP relay module, 4x NO with manual operation, 5A, 24-120VDC/24-230VAC.
Description
About the RQ 4x120 V DC ... 230 V AC/5 A NO MA ST
About the RQ 4x120 V DC ... 230 V AC/5 A NO MA ST
The Siemens 6ES7132-6MD00-0BB1 is a SIMATIC ET 200SP relay module with 4 normally-open outputs rated 5 A at 24-120 V DC or 24-230 V AC, fitted with a manual operation feature for each channel. It runs on 24 V DC, mounts on BU type B0 or B1, and is rated for 7,000,000 operating cycles per relay.
Selection Notes
The manual-operation feature on each of the 4 normally-open contacts lets a technician force a channel during commissioning or maintenance without touching the PLC program, which is the main reason to choose this variant over a plain relay output module. Its 7,000,000 operating-cycle rating is well above the isolated CO relay module's 1,000,000 cycles, so it suits circuits with more frequent switching. Protect each output with the specified 6 A quick-response fuse before commissioning.
Specification
Full specification
General information 16
| Product type designation | RQ 4x120 V DC ... 230 V AC/5 A NO MA ST |
|---|---|
| HW functional status | From FS03 |
| Firmware version: FW update possible | Yes |
| usable BaseUnits | BU type B0, B1 |
| Color code for module-specific color-coded label | CC40 |
| Product function: I&M data | Yes; I&M0 to I&M3 |
| Product function: Isochronous mode | No |
| Engineering with: STEP 7 TIA Portal configurable/integrated from version | V13 SP1 |
| Engineering with: STEP 7 configurable/integrated from version | V5.5 SP3 / - |
| Engineering with: PROFIBUS from GSD version/GSD revision | One GSD file each, Revision 3 and 5 and higher |
| Engineering with: PROFINET from GSD version/GSD revision | GSDML V2.3 |
| Operating mode: DQ | Yes |
| Operating mode: DQ with energy-saving function | No |
| Operating mode: PWM | No |
| Operating mode: Oversampling | No |
| Operating mode: MSO | No |
Supply voltage 4
| Rated value (DC) | 24 V |
|---|---|
| permissible range, lower limit (DC) | 19.2 V |
| permissible range, upper limit (DC) | 28.8 V |
| Reverse polarity protection | Yes |
Input current 1
| Current consumption, max. | 100 mA; without load |
|---|
Show all 102 specifications ↓ Show less ↑81 more values in Identification, Power loss, Address area, Hardware configuration, Digital outputs, Interrupts/diagnostics/status information, Potential separation, Permissible potential difference, Isolation, Standards, approvals, certificates, Ambient conditions, Dimensions, Weights, Logistics.
Identification 10
| Part number | 6ES7132-6MD00-0BB1 |
|---|---|
| Type designation | RQ 4x120 V DC ... 230 V AC/5 A NO MA ST |
| Brand | Siemens |
| Condition | New, factory sealed |
| Source | Siemens and its authorised distributors |
| Warranty | Manufacturer warranty |
| Lifecycle status | Active, in production |
| EAN | 4047623406624 |
| ETIM class | EC001599 |
| eCl@ss | 27242604 |
Power loss 1
| Power loss, typ. | 1.5 W |
|---|
Address area 2
| Address space per module: Inputs | 1 byte; + 1 byte for QI information |
|---|---|
| Address space per module: Outputs | 1 byte |
Hardware configuration 5
| Automatic encoding | Yes |
|---|---|
| Mechanical coding element | Yes |
| Type of mechanical coding element | type C |
| Selection of BaseUnit for connection variants: 2-wire connection | BU type B1 |
| Selection of BaseUnit for connection variants: 3-wire connection | BU type B0 |
Digital outputs 25
| Type of digital output | Relays |
|---|---|
| Number of digital outputs | 4 |
| Current-sinking | Yes |
| Current-sourcing | Yes |
| Digital outputs, parameterizable | Yes |
| Short-circuit protection | No |
| Switching frequency: with resistive load, max. | 2 Hz |
| Switching frequency: with inductive load (acc. to IEC 60947-5-1, DC13), max. | 0.5 Hz; provide one freewheeling diode for switching frequencies higher than 0.1 Hz |
| Switching frequency: on lamp load, max. | 2 Hz |
| Total current of the outputs: Current per channel, max. | 5 A |
| Total current of the outputs: Current per module, max. | 20 A |
| Total current of the outputs (per module) horizontal installation: up to 50 °C, max. | 20 A |
| Relay outputs: Number of relay outputs | 4 |
| Relay outputs: Rated supply voltage of relay coil L+ (DC) | 24 V |
| Relay outputs: Current consumption of relays (coil current of all relays), max. | 40 mA |
| Relay outputs: external protection for relay outputs | Yes, with miniature fuse max. 6 A tripping current and quick-response tripping characteristic |
| Relay outputs: Number of operating cycles, max. Switching capacity of contacts | 7 000 000; see additional description in the manual |
| Relay outputs: with inductive load, max. | 2 A; see additional description in the manual |
| Relay outputs: with resistive load, max. | 5 A; see additional description in the manual |
| Relay outputs: Thermal continuous current, max. | 5 A |
| Relay outputs: Switching current, min. | 100 mA; 5 V DC |
| Relay outputs: Rated switching voltage (DC) | 24 V DC to 120 V DC |
| Relay outputs: Rated switching voltage (AC) | 24V AC to 230V AC |
| Cable length: shielded, max. | 1 000 m |
| Cable length: unshielded, max. | 200 m |
Interrupts/diagnostics/status information 11
| Diagnostics function | Yes |
|---|---|
| Substitute values connectable | Yes |
| Alarms: Diagnostic alarm | Yes |
| Diagnoses: Monitoring the supply voltage | Yes |
| Diagnoses: Wire break | No |
| Diagnoses: Short-circuit | No |
| Diagnoses: Group error | Yes |
| Diagnostics indication LED: Monitoring of the supply voltage (PWR-LED) | Yes; green PWR LED |
| Diagnostics indication LED: Channel status display | Yes; green LED |
| Diagnostics indication LED: for channel diagnostics | No |
| Diagnostics indication LED: for module diagnostics | Yes; green/red DIAG LED |
Potential separation 3
| Potential separation channels: between the channels | Yes |
|---|---|
| Potential separation channels: between the channels and backplane bus | Yes |
| Potential separation channels: between the channels and the power supply of the electronics | Yes |
Permissible potential difference 1
| between channels and backplane bus/supply voltage | 240 V AC |
|---|
Isolation 3
| Isolation tested with tested with | 2 500 V DC (type test) |
|---|---|
| between channels and backplane bus/supply voltage | 2 500 V DC |
| between backplane bus and supply voltage | 707 V DC (type test) |
Standards, approvals, certificates 6
| Suitable for safety functions | No |
|---|---|
| Ecological footprint: environmental product declaration Global warming potential | Yes |
| Ecological footprint: global warming potential, (total) [CO2 eq] | 25.5 kg |
| Ecological footprint: global warming potential, (during production) [CO2 eq] | 3.54 kg |
| Ecological footprint: global warming potential, (during operation) [CO2 eq] | 22.1 kg |
| Ecological footprint: global warming potential, (after end of life cycle) [CO2 eq] | -0.137 kg |
Ambient conditions 4
| Ambient temperature during operation: horizontal installation, min. | -30 °C |
|---|---|
| Ambient temperature during operation: vertical installation, min. | -30 °C |
| Altitude during operation relating to sea level: Installation altitude above sea level, max. | 2 000 m; On request: Installation altitudes greater than 2 000 m |
| Absolute humidity: dew point, min. | -60 °C; suitable for dry room applications |
Dimensions 3
| Width | 20 mm |
|---|---|
| Height | 73 mm |
| Depth | 58 mm |
Weights 1
| Weight, approx. | 45 g |
|---|
Logistics 6
| Net weight | 0.054 kg |
|---|---|
| Country of origin | DE |
| Shipping weight | 0.554 kg |
| Ships from | Türkiye |
| Dispatch | — |
| Stock | On request |
Source: manufacturer data · Last verified: 01 Nov 2026
Documents
Documents for 6ES7132-6MD00-0BB1
No documents are on file for this part yet.
Ask us for the datasheet
Quick answers
Questions about the RQ 4x120 V DC ... 230 V AC/5 A NO MA ST
What is the rated current of RQ 4x120 V DC ... 230 V AC/5 A NO MA ST?
The rated current of RQ 4x120 V DC ... 230 V AC/5 A NO MA ST is 5 A.
Which supply voltage is RQ 4x120 V DC ... 230 V AC/5 A NO MA ST rated for?
The rated operational voltage of RQ 4x120 V DC ... 230 V AC/5 A NO MA ST is 24–230 V AC.
What is the HS code of RQ 4x120 V DC ... 230 V AC/5 A NO MA ST for customs?
The tariff (HS) code on file for RQ 4x120 V DC ... 230 V AC/5 A NO MA ST is 85389091.
What is the EAN of RQ 4x120 V DC ... 230 V AC/5 A NO MA ST?
The EAN (GTIN) of RQ 4x120 V DC ... 230 V AC/5 A NO MA ST is 4047623406624.
Where does RQ 4x120 V DC ... 230 V AC/5 A NO MA ST ship from, and how fast?
RQ 4x120 V DC ... 230 V AC/5 A NO MA ST ships from Türkiye. Shipping calculated at checkout · import duties and taxes paid on arrival.
Guides
Guides for PLC & controllers
What Is a Programmable Logic Controller and How Does It Work
Learn how a PLC works, including scan cycle, I/O sizing, IEC 61131-3 programming, and hardware selection for ABB, Schneider, and Siemens. Shop at Stoklink.
Main Components of a PLC System: Complete Guide for Engineers
Master PLC system components: CPU, power supply, I/O modules, communication interfaces, and software with sizing formulas and selection tips. Shop at Stoklink.
Reviews
Customer reviews
Series
Siemens SIMATIC ET 200SP
- Brand
- Siemens
- Series
- SIMATIC ET 200SP
