How to Select an Interface Relay for PLC Outputs
A step-by-step guide to matching PLC output type, coil voltage and current, contact rating, and socket style when selecting an interface relay.
- Part number
- 6BK1622-0AA00-0AA0
- Model no
- PN/M-Bus LINK
In stock · 23
Dispatch
Planned dispatch date. We aim to ship within 1 business day. Depending on warehouse workload it can take 2–3 business days.
· From Türkiye
0
Siemens has announced the end of 6BK1622-0AA00-0AA0
Once production ends, supply depends on remaining stock.
No replacement announced yet. Tell us the application and we will propose an alternative.
SIMATIC MICRO-DRIVESiemens 6BK1622-0AA00-0AA0 SIMATIC PN/M-Bus LINK PROFINET 40-Device Telecontrol Module
SIMATIC PN/M-Bus LINK, PROFINET to M-Bus gateway, master for up to 40 devices
Description
About the PN/M-Bus LINK
About the PN/M-Bus LINK
The Siemens 6BK1622-0AA00-0AA0 is a SIMATIC PN/M-Bus LINK coupling module that bridges a PROFINET network to an M-Bus field bus, acting as M-Bus master for up to 40 connected meters. It runs on 24 V DC (20.4-28.8 V), has two RJ45 PROFINET ports with an integrated switch, and carries IP20 protection.
Certifications & Standards
- CE
- RoHS
Selection Notes
The 40-device M-Bus master capacity and 300 m max cable length size this LINK module for a full sub-metering branch rather than a handful of meters, so count connected M-Bus devices against that 40-unit ceiling before adding more. Two RJ45 ports with an integrated switch let it sit in a PROFINET line topology without a separate switch upstream. It is rated to -25°C on the low end, so verify the installation location's minimum temperature against that limit in unheated cabinets.
Applications
Bridges PROFINET-based automation and building-management systems to M-Bus energy and utility meters for centralized remote metering and consumption monitoring.
Specification
Full specification
General information 7
| Product type designation | PN/M-Bus LINK |
|---|---|
| Firmware version | V1.0.0 |
| FW update possible | Yes |
| Product function: I&M data | Yes |
| Product function: Isochronous mode | No |
| Engineering with: STEP 7 TIA Portal configurable/integrated from version | STEP 7 V15 or higher |
| Engineering with: PROFINET from GSD version/GSD revision | GSDML V2.3.x |
Installation type/mounting 5
| Mounting | DIN rail, wall mounting, portrait mounting |
|---|---|
| Mounting position | any |
| Recommended mounting position | Horizontal |
| Rail mounting | Yes |
| Control cabinet installation | Yes |
Supply voltage 8
| Type of supply voltage | DC |
|---|---|
| Rated value (DC) | 24 V |
| permissible range, lower limit (DC) | 20.4 V |
| permissible range, upper limit (DC) | 28.8 V |
| Reverse polarity protection | Yes |
| Overvoltage protection | Yes |
| Short-circuit protection | Yes |
| Mains buffering: Mains/voltage failure stored energy time | 10 ms; PN side |
Show all 94 specifications ↓ Show less ↑74 more values in Identification, Input current, Power loss, Interfaces, 1. Interface, 2. Interface, Interrupts/diagnostics/status information, Potential separation, Degree and class of protection, Standards, approvals, certificates, Ambient conditions, Dimensions, Weights, Logistics.
Identification 10
| Part number | 6BK1622-0AA00-0AA0 |
|---|---|
| Type designation | PN/M-Bus LINK |
| Brand | Siemens |
| Condition | New, factory sealed |
| Source | Siemens and its authorised distributors |
| Warranty | Manufacturer warranty |
| Lifecycle status | Phase-out announced by the manufacturer |
| EAN | 4025515739623 |
| ETIM class | EC001423 |
| eCl@ss | 27242208 |
Input current 2
| Current consumption (rated value) | 0.11 A; At 24 V and 5 loads |
|---|---|
| Current consumption, max. | 0.4 A; At 20.4 V, 40 loads + 100 mA short-circuit current |
Power loss 1
| Power loss, typ. | 2.4 W |
|---|
Interfaces 6
| Supports protocol for PROFINET IO: automatic detection of transmission rate | No |
|---|---|
| Supports protocol for PROFINET IO: Transmission rate, max. | 100 Mbit/s |
| Supports protocol for PROFINET IO: Number of RJ45 ports | 2 |
| Supports protocol for PROFINET IO: Number of FC (FastConnect) connections | 2 |
| PROFINET functions: Assignment of the IP address, supported | Yes |
| PROFINET functions: Assignment of the device name, supported | Yes |
1. Interface 12
| Interface type | M-Bus master |
|---|---|
| Isolated | No |
| Interface types: Number of ports | 1 |
| Interface types: Design of the connection | 3-wire screw-type terminal |
| M-Bus: Bus voltage, typ. | 36 V |
| M-Bus: Transmission rate, min. | 300 bit/s |
| M-Bus: Transmission rate, max. | 9 600 bit/s |
| M-Bus: max. number of devices | 40 |
| M-Bus: Short-circuit detection | Yes |
| M-Bus: short-circuit proof | Yes |
| M-Bus: Connectable conductor cross-section | 1.5 mm2 |
| M-Bus: Cable length, max. | 300 m |
2. Interface 7
| Interface type | PROFINET |
|---|---|
| Isolated | Yes; 1 500 V AC or 2 250 V DC |
| Interface types: RJ 45 (Ethernet) | Yes |
| Interface types: Number of ports | 2 |
| Interface types: integrated switch | Yes |
| Protocols: PROFINET IO Device | Yes |
| Protocols: Open IE communication | Yes |
Interrupts/diagnostics/status information 8
| Status indicator | Yes |
|---|---|
| Alarms | Yes |
| Diagnostics function | Yes |
| Diagnostics indication LED: RUN LED | Yes |
| Diagnostics indication LED: ERROR LED | Yes |
| Diagnostics indication LED: MAINT LED | Yes |
| Diagnostics indication LED: LINK LED | Yes |
| Diagnostics indication LED: RX/TX LED | Yes |
Potential separation 1
| Potential separation exists | Yes |
|---|
Degree and class of protection 1
| IP degree of protection | IP20 |
|---|
Standards, approvals, certificates 7
| CE mark | Yes |
|---|---|
| RoHS conformity | Yes |
| Ecological footprint: environmental product declaration Global warming potential | Yes |
| Ecological footprint: global warming potential, (total) [CO2 eq] | 50.8 kg |
| Ecological footprint: global warming potential, (during production) [CO2 eq] | 14.4 kg |
| Ecological footprint: global warming potential, (during operation) [CO2 eq] | 36.8 kg |
| Ecological footprint: global warming potential, (after end of life cycle) [CO2 eq] | -0.52 kg |
Ambient conditions 9
| Ambient temperature during operation: horizontal installation, min. | -25 °C |
|---|---|
| Ambient temperature during operation: vertical installation, min. | -25 °C |
| Ambient temperature during operation: ceiling installation, min. | -25 °C |
| Ambient temperature during operation: ceiling installation, max. | 45 °C |
| Ambient temperature during operation: floor installation, min. | -25 °C |
| Ambient temperature during operation: floor installation, max. | 45 °C |
| Ambient temperature during storage/transportation: min. | -40 °C |
| Ambient temperature during storage/transportation: max. | 70 °C |
| Relative humidity: Operation, max. | 95 % |
Dimensions 3
| Width | 70 mm |
|---|---|
| Height | 112 mm |
| Depth | 75 mm |
Weights 1
| Weight, approx. | 215 g |
|---|
Logistics 6
| Net weight | 0.273 kg |
|---|---|
| Country of origin | DE |
| Shipping weight | 0.773 kg |
| Ships from | Türkiye |
| Dispatch | 13 Nov |
| Stock | In stock |
Source: manufacturer data · Last verified: 01 Nov 2026
Documents
Documents for 6BK1622-0AA00-0AA0
No documents are on file for this part yet.
Ask us for the datasheet
Certifications
Certifications and standards
- CE mark
- RoHS conformity
Quick answers
Questions about the PN/M-Bus LINK
What is the rated current of PN/M-Bus LINK?
The rated current of PN/M-Bus LINK is 0.11 A.
Which supply voltage is PN/M-Bus LINK rated for?
The rated operational voltage of PN/M-Bus LINK is 24 V AC.
What is the HS code of PN/M-Bus LINK for customs?
The tariff (HS) code on file for PN/M-Bus LINK is 85176200.
What is the EAN of PN/M-Bus LINK?
The EAN (GTIN) of PN/M-Bus LINK is 4025515739623.
Where does PN/M-Bus LINK ship from, and how fast?
PN/M-Bus LINK ships from Türkiye. Shipping calculated at checkout · import duties and taxes paid on arrival. Stock items are dispatched within 1–2 business days.
Guides
Guides for PLC & controllers
Main Types of Programmable Logic Controllers: A Complete PLC Guide
Compare the 5 main PLC types, IEC 61131-3 languages, scan-time sizing, and brand options to choose the right controller for your plant. Shop at...
Programmable Logic Controller Guide: Selection, Application, and Maintenance for Engineers
PLC selection guide for engineers covering IEC 61131 compliance, Siemens, Rockwell, Schneider, ABB comparison, scan time sizing, and wiring. Shop at Stoklink.
Reviews
Customer reviews
Series
Siemens SIMATIC MICRO-DRIVE
- Brand
- Siemens
- Series
- SIMATIC MICRO-DRIVE
