Part number
C12N6TM160B
Model no
NSXm 160N
$561.66 On request Dispatch — · From TürkiyeGet a Quote

Schneider Electric C12N6TM160B ComPacT NSXm160N 4P 160 A 50 kA TM-D Fixed Moulded Case Circuit Breaker

Schneider Electric C12N6TM160B ComPacT NSXm160N 4P 160A TM-D, 50 kA at 415 V AC.

Rated current
160 A
Rated operational voltage
440 V AC
Description

About the NSXm 160N

The C12N6TM160B is a 4-pole (3D, neutral unprotected) Schneider Electric ComPacT NSXm160N moulded case circuit breaker rated 160 A, with a TM-D thermal-magnetic trip unit and 50 kA breaking capacity (Icu) at 380/415 V AC. Rated operational voltage (Ue) is 440 V AC. At 160 A it is the highest-current, highest-breaking-capacity option in the NSXm160 4-pole frame.

Certifications & Standards

  • EN/IEC 60947-2

Selection Notes

This is the top-spec combination in the NSXm160 4P line — full 160 A trip rating with the higher 50 kA N performance level — so it suits incomers or sub-mains where neither current nor fault level can be traded down. Against the 125 A sibling in the same N frame, choose the C12N6TM160B when the downstream cable and load are sized for the full 160 A; the 3D pole arrangement still leaves the neutral switched but unprotected on both variants.

Specification

Full specification

89 values · Last verified 30 Oct 2026

Main 21

Range ComPacT
Product name ComPacT NSXm
Device short name NSXm 160N
Product or component type Circuit breaker
Device application Distribution
Poles description 4P
Protected poles description 3D
Neutral position Left
[In] rated current 160 A at 40 °C
[Ue] rated operational voltage 440 V AC 50/60 Hz
Network type AC
Network frequency 50/60 Hz
Suitability for isolation Yes conforming to IEC 60947-2
Utilisation category Category A
[Icu] rated ultimate short-circuit breaking capacity 90 kA Icu at 220...240 V AC 50/60 Hz conforming to IEC 60947-2, 50 kA Icu at 380...415 V AC 50/60 Hz conforming to IEC 60947-2, 50 kA Icu at 440 V AC 50/60 Hz conforming to IEC 60947-2
Performance level N 50 kA 415 V AC
Trip unit name TM-D
Trip unit technology Thermal-magnetic
Trip unit protection functions LI
Control type Toggle
Circuit breaker mounting mode Fixed

Complementary 28

[Ui] rated insulation voltage 800 V AC 50/60 Hz
[Uimp] rated impulse withstand voltage 8 kV
[Ics] rated service short-circuit breaking capacity 90 kA at 220...240 V AC 50/60 Hz conforming to IEC 60947-2, 50 kA at 380...415 V AC 50/60 Hz conforming to IEC 60947-2, 50 kA at 440 V AC 50/60 Hz conforming to IEC 60947-2
Mechanical durability 20000 cycles
Electrical durability 20000 cycles at 440 V In/2, 10000 cycles at 440 V In
Power dissipation per pole 13.7 W
Mounting support Backplate
Mounting position Horizontal and vertical, Flat on the back
Upside connection Front
Downside connection Front
Connection terminals compression lug/busbar
Connection pitch 35 mm with spreaders, 27 mm without spreaders
9 mm pitches 12 module
Trip unit rating 160 A at 40 °C
Long-time pick-up adjustment type Ir (thermal protection) Adjustable
[Ir] long-time protection pick-up adjustment range 0.7...1 x In
Long-time protection delay adjustment type tr Fixed
Neutral protection settings No protection (3D)
Instantaneous protection pick-up adjustment type Ii Fixed
[Ii] instantaneous protection pick-up adjustment range 1250 A
Earth-leakage protection Without
Number of slots for electrical auxiliaries 1 slot(s) for auxiliary switch OF, 1 slot(s) for alarm switch SD, 1 slot(s) for voltage release MN or MX
Local signalling Flag (green) for presence of auxiliary contacts
Width (W) 108 mm
Height (H) 137 mm
Depth (D) 80 mm
Net weight 1.42 kg
Colour Grey (RAL 7016)

Environment 10

Standards EN/IEC 60947-2
Overvoltage category III
Electrical shock protection class Class II on front face
Pollution degree 3 conforming to IEC 60664-1
IP degree of protection IP40 conforming to IEC 60529
IK degree of protection IK07 conforming to IEC 62262
Ambient air temperature for operation -25…70 °C
Ambient air temperature for storage -50…85 °C
Relative humidity 0…95 %
Operating altitude 2000 m without derating, 5000 m with derating
Show all 89 specifications ↓ Show less ↑30 more values in Identification, Contractual warranty, Logistics.

Identification 7

Part number C12N6TM160B
Type designation NSXm 160N
Brand Schneider Electric
Condition New, factory sealed
Source Schneider Electric and its authorised distributors
Warranty Manufacturer warranty
Lifecycle status Active, in production

Contractual warranty 1

Warranty (in months) 18

Logistics 22

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 13.000 cm
Package 1 Width 12.000 cm
Package 1 Length 22.000 cm
Package 1 Weight 1.600 kg
Unit Type of Package 2 S03
Number of Units in Package 2 6
Package 2 Height 30.000 cm
Package 2 Width 30.000 cm
Package 2 Length 40.000 cm
Package 2 Weight 10.190 kg
Unit Type of Package 3 P12
Number of Units in Package 3 144
Package 3 Height 150.000 cm
Package 3 Width 80.000 cm
Package 3 Length 120.000 cm
Package 3 Weight 254.490 kg
Shipping weight 1.42 kg
Ships from Türkiye
Dispatch —
Stock On request

Source: manufacturer data · Last verified: 30 Oct 2026

Documents

Documents for C12N6TM160B

No documents are on file for this part yet.

Ask us for the datasheet
Certifications

Certifications and standards

  • EN/IEC 60947-2
Quick answers

Questions about the NSXm 160N

What is the rated current of NSXm 160N?

The rated current of NSXm 160N is 160 A.

Which supply voltage is NSXm 160N rated for?

The rated operational voltage of NSXm 160N is 440 V AC.

What is the HS code of NSXm 160N for customs?

The tariff (HS) code on file for NSXm 160N is 853620.

Where does NSXm 160N ship from, and how fast?

NSXm 160N ships from Türkiye. Shipping calculated at checkout · import duties and taxes paid on arrival.

Guides

Guides for MCCB

All guides for MCCB
Reviews

Customer reviews

Series

Schneider Electric Schneider ComPacT NSX

Brand
Schneider Electric
Series
Schneider ComPacT NSX
Series page →
Series

Other series in Molded Case Circuit Breakers (MCCB)

$561.66 On request
Get a Quote
Quote

Get a Quote

NSXm 160N

Genuine parts

Genuine, factory-sealed parts

Schneider Electric · C12N6TM160B

Every part on Stoklink is new, unused and made by the manufacturer named on the page.

Condition
New and unused, in the manufacturer's factory-sealed packaging.
Sourced from
Schneider Electric and its authorised distributors.
Warranty
The manufacturer's warranty applies.
If a part is not genuine
We refund the full amount.

Added to cart Could not add to cart

View cart