Part number
A9N61533
Model no
C60H-DC
$59.73 Low stock Dispatch Planned dispatch date. We aim to ship within 30 business days. Depending on warehouse workload it can take 1–2 business days longer. · From Türkiye
Acti9 C60H-DC

Schneider Electric A9N61533 Acti9 C60H-DC 2P 25A C Curve DC Miniature Circuit Breaker

Acti9 C60H-DC 2P 25 A C-curve DC MCB, 500 V DC Ue, Icu 20 kA at 250 V DC / 6 kA at 500 V DC, 4 modules, DIN rail.

Rated current
25 A
Poles
2P
Description

About the C60H-DC

The Schneider Electric A9N61533 is a 2-pole, 25 A, C-curve DC miniature circuit breaker from the Acti9 C60H-DC range, rated for 500 V DC operational voltage. Its thermal-magnetic trip unit covers overload and short-circuit protection, it is suitable for isolation to IEC/EN 60947-2, and it breaks 20 kA at 220-250 V DC or 6 kA at 500 V DC in a 36 mm DIN-rail body.

Certifications & Standards

  • IEC 60947-2
  • EN 60947-2
  • GB 14048.2
  • EU RoHS

Selection Notes

The A9N61533 carries its 25 A rating at a 25 °C reference, so in a sealed DC enclosure running warmer than that the usable continuous current falls; when the steady load already sits close to 25 A, the 32 A variant of the same C60H-DC frame is the safer pick. Breaking capacity depends on how high the DC bus voltage is: 20 kA Icu at 220-250 V DC, but only 10 kA at 440 V DC and 6 kA at 500 V DC, so check the prospective fault current of the battery bank or rectifier against the voltage you actually run before specifying it. With two protected poles, the positive and negative conductors are both opened and isolated, which suits floating or unearthed DC systems where either conductor can carry fault current. The C curve tolerates the moderate switch-on current of DC power supplies and small DC motors without nuisance tripping, while a B-curve breaker is the closer match for long cable runs with low fault levels.

Specification

Full specification

71 values · Last verified 30 Oct 2026

Main 15

Range Acti9
Product name Acti9 C60H-DC
Product or component type Miniature circuit-breaker
Device short name C60H-DC
Device application Distribution
Poles description 2P
Number of protected poles 2
[In] rated current 25 A at 25 °C
Network type DC
Trip unit technology Thermal-magnetic
Curve code C
Breaking capacity 10 kA Icu at 440 V DC conforming to EN 60947-2, 10 kA Icu at 440 V DC conforming to IEC 60947-2, 6 kA Icu at 500 V DC conforming to EN 60947-2, 6 kA Icu at 500 V DC conforming to IEC 60947-2, 20 kA Icu at 220 V DC conforming to GB 14048.2, 20 kA Icu at 220 V DC conforming to IEC 60947-2, 20 kA Icu at 250 V DC conforming to GB 14048.2, 20 kA Icu at 250 V DC conforming to IEC 60947-2
Utilisation category Category A conforming to EN 60947-2, Category A conforming to IEC 60947-2
Suitability for isolation Yes conforming to IEC 60947-2, Yes conforming to EN 60947-2
Standards EN 60947-2, IEC 60947-2

Complementary 20

Network frequency 50/60 Hz
[Ue] rated operational voltage 500 V DC
[Ics] rated service breaking capacity 15 kA 75 % conforming to EN 60947-2 - 220 V DC, 15 kA 75 % conforming to IEC 60947-2 - 220 V DC, 15 kA 75 % conforming to EN 60947-2 - 250 V DC, 15 kA 75 % conforming to IEC 60947-2 - 250 V DC, 4.5 kA 75 % conforming to EN 60947-2 - 500 V DC, 4.5 kA 75 % conforming to IEC 60947-2 - 500 V DC, 7.5 kA 75 % conforming to EN 60947-2 - 440 V DC, 7.5 kA 75 % conforming to IEC 60947-2 - 440 V DC
[Ui] rated insulation voltage 500 V DC conforming to IEC 60947-2, 500 V DC conforming to EN 60947-2
[Uimp] rated impulse withstand voltage 6 kV conforming to EN 60947-2, 6 kV conforming to IEC 60947-2
Contact position indicator Yes
Control type Toggle
Local signalling ON/OFF indication
Mounting mode Fixed
Mounting support 35 mm symmetrical DIN rail
Comb busbar and distribution block compatibility Top or bottom: standard
9 mm pitches 4
Net weight 0.256 kg
Colour White
Mechanical durability 20000 cycles
Electrical durability 3000 cycles L/R = 2 ms
Provision for padlocking Padlockable
Locking options description In position O
Tightening torque Power circuit: 2.5 N.m top or bottom
Earth-leakage protection Without

Environment 6

Pollution degree 3 conforming to EN 60947-2, 3 conforming to IEC 60947-2
Overvoltage category IV
Tropicalisation 2 conforming to IEC 60068-2
Operating altitude 2000 m
Ambient air temperature for operation -25…70 °C
Ambient air temperature for storage -40…85 °C
Show all 71 specifications ↓ Show less ↑30 more values in Identification, Contractual warranty, Logistics.

Identification 7

Part number A9N61533
Type designation C60H-DC
Brand Schneider Electric
Condition New, factory sealed
Source Schneider Electric and its authorised distributors
Warranty Manufacturer warranty
Lifecycle status Active, in production

Contractual warranty 1

Warranty (in months) 18

Logistics 22

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 7.500 cm
Package 1 Width 3.700 cm
Package 1 Length 8.500 cm
Package 1 Weight 233.000 g
Unit Type of Package 2 BB1
Number of Units in Package 2 6
Package 2 Height 8.400 cm
Package 2 Width 9.200 cm
Package 2 Length 22.500 cm
Package 2 Weight 1.449 kg
Unit Type of Package 3 S03
Number of Units in Package 3 72
Package 3 Height 30.000 cm
Package 3 Width 30.000 cm
Package 3 Length 40.000 cm
Package 3 Weight 17.938 kg
Shipping weight 0.256 kg
Ships from Türkiye
Dispatch 29 Dec
Stock Low stock

Source: manufacturer data · Last verified: 30 Oct 2026

Documents

Documents for A9N61533

No documents are on file for this part yet.

Ask us for the datasheet
Certifications

Certifications and standards

  • EN 60947-2
  • IEC 60947-2
Quick answers

Questions about the C60H-DC

What is the rated current of C60H-DC?

The rated current of C60H-DC is 25 A.

What is the HS code of C60H-DC for customs?

The tariff (HS) code on file for C60H-DC is 853620.

Where does C60H-DC ship from, and how fast?

C60H-DC ships from Türkiye. Shipping calculated at checkout · import duties and taxes paid on arrival. Stock items are dispatched within 30 business days.

Guides

Guides for MCB

All guides for MCB
Reviews

Customer reviews

Series

Schneider Electric Acti9 C60H-DC

Brand
Schneider Electric
Series
Acti9 C60H-DC
Series

Other series in Miniature Circuit Breakers (MCB)

$59.73 Low stock · 29 Dec
Quote

Get a Quote

C60H-DC

Genuine parts

Genuine, factory-sealed parts

Schneider Electric · A9N61533

Every part on Stoklink is new, unused and made by the manufacturer named on the page.

Condition
New and unused, in the manufacturer's factory-sealed packaging.
Sourced from
Schneider Electric and its authorised distributors.
Warranty
The manufacturer's warranty applies.
If a part is not genuine
We refund the full amount.

Added to cart Could not add to cart

View cart