- Home
- Servo Motors
- Siemens 1FL2105-4AF01-0HB0 SIMOTICS S-1FL2 400V 2.10kW Servo Motor Siemens 1FL2105-4AF01-0HB0 SIMOTICS S-1FL2 400V 2.10kW Servo Motor
Siemens 1FL2105-4AF01-0HB0 SIMOTICS S-1FL2 400V 2.10kW Servo Motor
Siemens 1FL2105-4AF01-0HB0 SIMOTICS S-1FL2 400V 2.10kW Servo Motor
Get Quote
- Description
The Siemens 1FL2105-4AF01-0HB0 is a SIMOTICS S-1FL2 servo motor for 400 V 3AC supply, rated 6.6 Nm / 2.10 kW at 3,000 rpm with 5.6 A rated current, an 8 Nm standstill torque, and a 17-bit absolute single-turn encoder for use with a SINAMICS S200 drive. Maximum output is 25.30 Nm and 24.0 A for short-duration overload.
Technical Specifications
| Order Number | 1FL2105-4AF01-0HB0 |
| Brand | Siemens |
| Series | SIMOTICS S-1FL2 |
| EAN | 4034106452933 |
| Country of Origin | CN |
| Cooling | Natural cooling |
| Static Torque | 8.00 Nm |
| Static Current | 6.70 A |
| Maximum Torque | 25.30 Nm |
| Maximum Current | 24.00 A |
| Maximum Speed | 6,000 rpm |
| Rotor Moment of Inertia | 2.6500 kgcm² |
| Weight | 7.80 kg |
| Rated Speed | 3,000 rpm |
| Rated Torque | 6.60 Nm |
| Rated Current | 5.60 A |
| Rated Power | 2.10 kW |
| Encoder | Absolute single-turn, 17-bit |
| Connector | Angular connector |
| Protection Class | IP65, with oil seal |
| Shaft Height | 52 mm |
| Flange Size (AB) | 105 mm |
| Centering Ring (N) | 95 mm |
| Hole Circle (M) | 115 mm |
| Screw-on Hole (S) | 9.0 mm |
| Overall Length (LB) | 210.9 mm |
| Diameter of Shaft (D) | 19 mm |
| Length of Shaft (E) | 45 mm |
| Length of Flange Diagonal (P) | 135 mm |
Selection Notes
This 0HB0 variant carries an angular connector and no holding brake, running on a plain shaft with tolerance N, pick it over a braked variant for horizontal axes where gravity won't move the load at standstill. At 6.6 Nm rated torque and 2.10 kW rated power in a 52 mm shaft height, it's the mid-power point among the S-1FL2 motors matched to the SINAMICS S200 drive family; smaller shaft-height motors in the same series top out well below this torque, and larger shaft-height frames carry more continuous torque for heavier axes.
Applications
Suited to single-axis servo motion on packaging, palletizing, and material-handling equipment driven by a SINAMICS S200, where the 6.6 Nm continuous / 25.3 Nm peak torque covers indexing and pick-and-place loads.