- Home
- Servo Motors
- Siemens 1FL2102-4AF00-0HC0 SIMOTICS S-1FL2 100W 400V 3000 rpm Servo Motor Siemens 1FL2102-4AF00-0HC0 SIMOTICS S-1FL2 100W 400V 3000 rpm Servo Motor
Siemens 1FL2102-4AF00-0HC0 SIMOTICS S-1FL2 100W 400V 3000 rpm Servo Motor
Siemens 1FL2102-4AF00-0HC0 SIMOTICS S-1FL2 100W 400V 3000 rpm Servo Motor
Get Quote
- Description
The Siemens 1FL2102-4AF00-0HC0 is a SIMOTICS S-1FL2 synchronous servo motor for a 400 V 3AC supply, rated at 0.10 kW with 0.32 Nm rated and standstill torque at 3000 rpm. It has a 20 mm shaft height, a hybrid connector, a 17-bit absolute single-turn encoder, IP54 protection without an oil seal, no holding brake, and is matched to the SINAMICS S200 drive.
Technical Specifications
| SKU | 1FL2102-4AF00-0HC0 |
| Brand | Siemens |
| Series | SIMOTICS S-1FL2 |
| Product Designation | 1FL2 |
| Matching Drive | SINAMICS S200 |
| Supply Voltage | 400 V 3AC |
| Rated Power | 0.10 kW |
| Rated Torque | 0.32 Nm |
| Static Torque | 0.32 Nm |
| Maximum Torque | 1.12 Nm |
| Rated Current | 0.81 A |
| Static Current | 0.81 A |
| Maximum Current | 2.90 A |
| Rated Speed | 3000 rpm |
| Maximum Speed | 6500 rpm |
| Rotor Moment of Inertia | 0.0290 kgcm2 |
| Encoder | Absolute, single-turn, 17-bit, hybrid connector (AS17bit) |
| Shaft Height | 20 mm |
| Shaft Type | Plain shaft, tolerance N |
| Degree of Protection | IP54, without oil seal |
| Holding Brake | Without |
| Cooling | Natural cooling |
| Weight | 0.38 kg |
| Flange Size (AB) | 40.6 mm |
| Centering Ring (N) | 30 mm |
| Hole Circle (M) | 46 mm |
| Screw-on Hole (S) | 4.4 mm |
| Overall Length (LB) | 80.2 mm |
| Shaft Diameter (D) | 8 mm |
| Shaft Length (E) | 25 mm |
| Flange Diagonal Length (P) | 54 mm |
| EAN | 4034106448493 |
Selection Notes
At 0.10 kW and 0.32 Nm, this 400 V winding suits pick-and-place and indexing axes needing this torque level while running from a higher supply voltage than a lower-voltage winding in the same 1FL2102 shaft-height-20 frame, which reduces current draw for the same power class. The plain shaft with no brake means the SINAMICS S200 drive must hold the axis at standstill; where the axis must stay parked with drive power removed, a holding-brake variant in the same frame is the better fit. Its 6500 rpm maximum speed against a 3000 rpm rated speed leaves headroom for short-duration overspeed moves in indexing or pick-and-place cycles.