Siemens 6EP1336-3BA10 SITOP PSU8200 24V DC 20A Stabilized Power Supply

The Siemens 6EP1336-3BA10 is a SITOP PSU8200 stabilized power supply that converts 120-230 V AC or 110-220 V DC input into a regulated 24 V DC output rated at 20 A. Efficiency is 94 percent, output voltage is adjustable from 24 to 28 V via potentiometer, and the unit snaps onto a 35 mm DIN rail for cabinet mounting.

Technical Specifications

Certifications & Standards

• CE
• UKCA
• EAC
• RCM
• SEMI F47
• CB
• Shipbuilding
• ABS
• DNV
• EPD

Selection Notes

The 20 A rating and 480 W typical output place this variant above the smaller PSU8200 models in the same family, sized for a fuller PLC rack plus I/O and sensor loads rather than a single controller. The 150 percent overload capability for up to 5 seconds per minute covers inrush from contactors or solenoids without oversizing the base rating. Wide-range AC/DC input (120-230 V AC or 110-220 V DC) lets one unit serve either a single-phase AC feed or a DC-fed cabinet without a separate input variant. The adjustable 24-28 V output compensates for cable voltage drop on long field runs to remote I/O.

Applications

Powering SIMATIC PLC racks, distributed I/O, and sensor/actuator loops in control cabinets fed from single-phase or two-phase AC or DC. The ABS and DNV marine classifications make it suitable for shipboard automation panels alongside standard industrial installations.