- Home
- Power Quality, Metering & Power Supplies
- Schneider Electric METSEPM5100 PowerLogic PM5100 Power Meter Class 0.5S Flush Mount Pulse Power Meter Schneider Electric METSEPM5100 PowerLogic PM5100 Power Meter Class 0.5S Flush Mount Pulse Power Meter
Schneider Electric METSEPM5100 PowerLogic PM5100 Power Meter Class 0.5S Flush Mount Pulse Power Meter
Schneider Electric METSEPM5100 PowerLogic PM5100 Power Meter Class 0.5S Flush Mount Pulse Power Meter
Get Quote
- Description
The Schneider Electric METSEPM5100 is a PowerLogic PM5100 flush-mount power meter, measuring energy, active and reactive power, voltage, current, frequency, power factor, and harmonics up to the 15th order with Class 0.5S accuracy to IEC 62053-22. It reads out on a 96 x 96 mm monochrome graphic LCD, provides one pulse output and 33 configurable alarms, and has no communication port.
Technical Specifications
| Reference | METSEPM5100 |
| Brand | Schneider Electric |
| Range | PowerLogic PM5000 |
| Product type | Power meter |
| Accuracy class | Class 0.5S active energy IEC 62053-22 |
| Measurement accuracy | Active energy +/- 0.5 %, voltage +/- 0.5 %, current +/- 0.5 %, frequency +/- 0.05 % |
| Rated supply voltage (Us) | 90...450 V AC 45...65 Hz or 100...300 V DC |
| Rated current (In) | 1 A / 5 A |
| Network frequency | 50 Hz / 60 Hz |
| Type of network | 1P+N, 3P, 3P+N |
| Measurement voltage | 35...760 V AC between phases, 20...400 V AC phase to neutral |
| Power quality analysis | Up to the 15th harmonic |
| Sampling rate | 64 samples/cycle |
| Display type | Monochrome graphic LCD, 128 x 128 pixels |
| Outputs | 1 pulse (energy) |
| Alarms | 33 configurable |
| Communication | None |
| Mounting mode | Flush-mounted |
| Dimensions (W x H x D) | 96 x 96 x 72 mm |
| IP degree of protection | IP54 display, IP30 rear |
| Net weight | 380 g |
Certifications & Standards
- CE
- cULus
- IEC 61010-1
- EN 50470-1
- IEC 62053-22
Selection Notes
The METSEPM5100 is the no-communication entry point of the PM5000 flush-mount line, giving Class 0.5S accuracy and 33 alarms with only a pulse output for remote counting. It fits a panel where the reading is checked locally; once the installation needs to poll the meter over Modbus, the METSEPM5110 adds RS485 in the identical body and display.