- Home
- Power Contactors (AC-3)
- Schneider Electric LC1E630M7 Easy TeSys Control LC1E 630A 3P 400V 335kW Contactor Schneider Electric LC1E630M7 Easy TeSys Control LC1E 630A 3P 400V 335kW Contactor
Schneider Electric LC1E630M7 Easy TeSys Control LC1E 630A 3P 400V 335kW Contactor
Schneider Electric LC1E630M7 Easy TeSys Control LC1E 630A 3P 400V 335kW Contactor
Get Quote
- Description
The Schneider Electric LC1E630M7 is a 3-pole Easy TeSys Control contactor rated 630 A (AC-3) at up to 440 V AC, built for direct-on-line motor control up to 335 kW at 400 V. It carries a 220 V AC coil and no built-in auxiliary contact, making it a bar-terminal power contactor for plate-mounted motor starter and switching panels.
Technical Specifications
| Reference | LC1E630M7 |
| Brand | Schneider Electric |
| Range | Easy TeSys Control |
| Device short name | LC1E |
| Product type | Contactor |
| Poles | 3P (3 NO) |
| Rated operational current (Ie) AC-3 | 630 A at <=440 V AC |
| Rated operational current (Ie) AC-1 | 1000 A at <=440 V AC |
| Motor power | 335 kW at 400 V AC |
| Control circuit voltage (Uc) | 220 V AC |
| Auxiliary contact composition | Without |
| Rated insulation voltage (Ui) | 690 V |
| Rated impulse withstand voltage (Uimp) | 8 kV |
| Rated short-time withstand current (Icw) | 5050 A / 10 s |
| Rated making capacity | 6300 A at 440 V AC |
| Rated breaking capacity | 5040 A at 440 V |
| Maximum operating rate | 1200 cyc/h at 55 C |
| Mounting support | Plate |
| IP degree of protection | IP00 |
| Ambient operating temperature | -5...55 C |
| Dimensions (H x W x D) | 304 x 309 x 255 mm |
| Net weight | 18.6 kg |
Certifications & Standards
- CB Scheme
- CCC
- CE
- EAC
- EN/IEC 60947-1
- EN/IEC 60947-4-1
- GB/T 14048.1
- GB/T 14048.4
Selection Notes
The 630 A AC-3 rating supports direct-on-line starting of motors up to 335 kW at 400 V AC, a step above the lower-current members of this power-contactor frame. Bar terminals with a 60 x 5 mm busbar cross-section and a 58 N.m power-circuit tightening torque reflect the bolted, high-current connections needed at this rating. The 5050 A / 10 s short-time withstand current gives margin to hold through fault current until the 800 A gG upstream fuses clear. With no built-in auxiliary contact, an add-on auxiliary contact block is required for any status or interlock signal.