- Home
- Motor Control & Protection
- Siemens 1FK7083-2AF71-1QA0 SIMOTICS S 1FK7-CT 3.3 kW 16 Nm 3000 rpm Servo Motor Siemens 1FK7083-2AF71-1QA0 SIMOTICS S 1FK7-CT 3.3 kW 16 Nm 3000 rpm Servo Motor
Siemens 1FK7083-2AF71-1QA0 SIMOTICS S 1FK7-CT 3.3 kW 16 Nm 3000 rpm Servo Motor
Siemens 1FK7083-2AF71-1QA0 SIMOTICS S 1FK7-CT 3.3 kW 16 Nm 3000 rpm Servo Motor
Get Quote
- Description
The Siemens 1FK7083-2AF71-1QA0 is a SIMOTICS S 1FK7-CT synchronous servo motor rated 3.3 kW with 16 Nm standstill torque at 100K and a 3,000 rpm rated speed. It runs on a 600 V DC link, uses natural cooling, and carries an IP64 enclosure with an absolute 20-bit single-turn DRIVE-CLiQ encoder (AS20DQI). This variant ships without a holding brake.
Technical Specifications
| SKU | 1FK7083-2AF71-1QA0 |
| Brand | Siemens |
| Series | SIMOTICS S |
| Product designation | 1FK7-CT |
| Rated power (PN) | 3.3 kW |
| DC link voltage (UDC) | 600 V |
| Standstill torque (M0) at 100K | 16 Nm |
| Rated speed (NN) | 3,000 rpm |
| Number of poles | 8 |
| Rated current | 7.2 A |
| Moment of inertia | 26.000 kgcm² |
| Efficiency | 93.0 % |
| Torque constant | 1.58 Nm/A |
| Voltage constant at 20°C | 102.5 V/1000 min⁻¹ |
| Winding resistance at 20°C | 0.38 Ω |
| Rotating field inductance | 7.0 mH |
| Electrical time constant | 18.60 ms |
| Mechanical time constant | 1.18 ms |
| Thermal time constant | 50 min |
| Shaft torsional stiffness | 101,000 Nm/rad |
| Net weight | 15.6 kg |
| Shaft height | 80 mm |
| Cooling | Natural cooling |
| Degree of protection | IP64 |
| Housing color | Anthracite (RAL 7016) |
| Encoder | Absolute single-turn, 20-bit, DRIVE-CLiQ interface (AS20DQI) |
| Holding brake | None |
| Shaft | Feather key, tolerance N |
| Power connector | 1, rotatable |
| Mounting | IMB5 (IM V1, IM V3), flange |
Selection Notes
Against the 2,000 rpm/16 Nm winding in the same frame, this 3,000 rpm version trades torque constant (1.58 Nm/A versus 2.13 Nm/A) for rated speed, raising rated power to 3.3 kW at the same 16 Nm standstill torque. Pick it when the application needs faster rapid-traverse moves at that torque level; pick the 2,000 rpm winding instead when the drive's current limit is the constraint rather than speed.
Applications
Typical use: higher-speed indexing and pick-and-place axes on SINAMICS S120/S210 lines where 16 Nm standstill torque and 3,000 rpm rated speed match the load profile.