- Home
- Motor Control & Protection
- Schneider Electric LE1M35U722 TeSys LE Enclosed DOL Starter 12-16 A 7.5 kW 240 V AC Coil IP65 Motor Starter Schneider Electric LE1M35U722 TeSys LE Enclosed DOL Starter 12-16 A 7.5 kW 240 V AC Coil IP65 Motor Starter
Schneider Electric LE1M35U722 TeSys LE Enclosed DOL Starter 12-16 A 7.5 kW 240 V AC Coil IP65 Motor Starter
Schneider Electric LE1M35U722 TeSys LE Enclosed DOL Starter 12-16 A 7.5 kW 240 V AC Coil IP65 Motor Starter
Get Quote
- Description
The Schneider Electric LE1M35U722 is a TeSys LE enclosed direct-on-line starter combining an LC1K contactor and an LR2K thermal overload relay in a single IP65 ABS enclosure. It covers the 12-16 A thermal setting range for AC-3 motor loads up to 7.5 kW at 380/400 V, with a 240 V AC 50/60 Hz control coil and a sealed green start / red stop pushbutton pair.
Technical Specifications
| Reference | LE1M35U722 |
| Brand | Schneider Electric |
| Range | TeSys |
| Product Name | TeSys LE |
| Device Short Name | LE1M |
| Product Type | Enclosed DOL starter |
| Utilisation Category | AC-3 |
| Thermal Protection Adjustment Range | 12…16 A |
| Motor Power | 7.5 kW at 380/400 V AC 50/60 Hz (4 kW at 220/230 V AC) |
| Control Circuit Voltage [Uc] | 240 V AC 50/60 Hz |
| Device Composition | Contactor, thermal overload relay, earth terminal, neutral terminal |
| Control Type | Push-button start (green I), push-button stop/reset (red O) |
| Local Signalling | Yellow operating LED |
| Material | ABS (acrylonitrile butadiene-styrene) |
| IP Degree of Protection | IP65 (IEC 60529) |
| Ambient Air Temperature for Operation | -5…40 °C |
| Width x Height x Depth | 78 x 160 x 108 mm |
| Net Weight | 0.6 kg |
Certifications & Standards
- UKCA
- IEC 60947-4-1
Selection Notes
The 12-16 A thermal range sizes this starter for the 7.5 kW point on the AC-3 motor power curve at 400 V; pick the next thermal range up if the nameplate full-load current sits above 16 A rather than relying on the overload margin. The IP65 enclosure lets it sit directly on a machine frame or outdoor panel without a separate control cabinet, and the built-in pushbuttons remove the need for door-mounted start/stop stations.