- Home
- Motor Control & Protection
- Schneider Electric LE1D09Q7 TeSys Deca Enclosed DOL Starter 3P 9 A 4 kW 380 V AC Coil IP65 Motor Starter Schneider Electric LE1D09Q7 TeSys Deca Enclosed DOL Starter 3P 9 A 4 kW 380 V AC Coil IP65 Motor Starter
Schneider Electric LE1D09Q7 TeSys Deca Enclosed DOL Starter 3P 9 A 4 kW 380 V AC Coil IP65 Motor Starter
Schneider Electric LE1D09Q7 TeSys Deca Enclosed DOL Starter 3P 9 A 4 kW 380 V AC Coil IP65 Motor Starter
Get Quote
- Description
The Schneider Electric LE1D09Q7 is a TeSys Deca enclosed DOL starter rated 9 A AC-3, protecting motors up to 4 kW at 400 V with a pre-wired LC1D contactor inside an IP65 polycarbonate enclosure. It runs on a 380 V AC control circuit, switches on and off via built-in green start and red stop pushbuttons, and ships without a thermal overload relay, which must be ordered separately.
Technical Specifications
| Reference | LE1D09Q7 |
| Brand | Schneider Electric |
| Range | TeSys Deca |
| GTIN | 3389110572537 |
| Device Short Name | LE1D |
| Product Type | Enclosed DOL Starter |
| Device Composition | Contactor (thermal overload relay ordered separately) |
| Utilisation Category | AC-3 |
| Conventional Enclosed Thermal Current (Ithe) | 9 A |
| Motor Power, 230 V | 2.2 kW |
| Motor Power, 400 V | 4 kW |
| Motor Power, 415 V | 4 kW |
| Motor Power, 440 V | 4 kW |
| Motor Power, 500 V | 5.5 kW |
| Motor Power, 690 V | 5.5 kW |
| Control Circuit Voltage (Uc) | 380 V AC 50/60 Hz |
| Control Type | Push-button start (green I) / stop-reset (red O) |
| Cable Entries | 2 x ISO20 top / 2 x ISO20 bottom |
| IP Degree of Protection | IP65 (IEC 60529) |
| IK Degree of Protection | IK07 (IEC 60529) |
| Material | Polycarbonate |
| Ambient Air Temperature for Operation | -5...40 °C |
| Dimensions (H x W x D) | 166 mm x 88 mm x 128.5 mm |
| Net Weight | 0.92 kg |
Certifications & Standards
- CB Scheme
- CE
- UKCA
- IEC 60947-4-1
Selection Notes
The 9 A AC-3 rating covers motors up to 4 kW at 400 V; step up to the next LE1D frame size in the same enclosure style rather than running this one above its rated current. The starter ships with the LC1D contactor pre-wired but deliberately omits a thermal overload relay — add one sized to the motor's full-load current before commissioning, since the enclosure gives no overload protection without it. The IP65/IK07 polycarbonate housing with ISO cable glands suits wall or machine mounting in washdown or dusty areas without a separate enclosure.