- Home
- DIN Rail Power Supplies (24V DC)
- Siemens 6EP3333-7LB00-0AX0 SITOP PSU6200 24V/3.7A NEC Class 2 PSU Siemens 6EP3333-7LB00-0AX0 SITOP PSU6200 24V/3.7A NEC Class 2 PSU
Siemens 6EP3333-7LB00-0AX0 SITOP PSU6200 24V/3.7A NEC Class 2 PSU
Siemens 6EP3333-7LB00-0AX0 SITOP PSU6200 24V/3.7A NEC Class 2 PSU
Get Quote
- Description
The Siemens 6EP3333-7LB00-0AX0 is a SITOP PSU6200 power supply that converts a 120-240 V AC (or 120-240 V DC) input into a stabilized 24 V DC output rated 3.7 A, certified to NEC Class 2 per UL 1310. It reaches 89.3% efficiency at 89 W typical supplied power and weighs 0.7 kg.
Technical Specifications
| SKU | 6EP3333-7LB00-0AX0 |
| Brand | Siemens |
| Series | SITOP PSU6200 |
| Product Designation | Power supply SITOP PSU6200 |
| Input Type | 1-phase AC or DC, wide range |
| Input Voltage | AC 120 ... 240 V / DC 120 ... 240 V |
| Line Frequency | 50/60 Hz |
| Output Voltage | 24 V DC, adjustable 24-28 V via potentiometer |
| Output Current, rated | 3.7 A |
| Supplied Power, typical | 89 W |
| Efficiency | 89.3 % |
| Power Loss, typical / no-load | 11 W / 2.2 W |
| Diagnostic Output | Electronic contact for DC O.K. |
| NEC Class 2 | Yes, per UL 1310, File E151273 |
| Overvoltage Protection | < 32 V |
| Short-Circuit Protection | Shutdown and periodic restart attempts |
| Galvanic Isolation | Yes, SELV/ES1 acc. to IEC 62368-1 |
| Protection Class | IP20 |
| Enclosure (W x H x D) | 35 x 135 x 125 mm |
| Mounting | DIN rail EN 60715 35x7.5/15 |
| Ambient Temperature (operation) | -30 ... +70 °C |
| Net Weight | 0.7 kg |
Certifications & Standards
- CE
- UKCA
- EAC
- RCM
- NEC Class 2
- SEMI F47
- CB
- Shipbuilding
- ABS
- DNV
- EPD
Selection Notes
NEC Class 2 certification to UL 1310 lets this PSU6200 variant feed low-voltage control and signaling circuits in US installations without the conduit and disconnect requirements of a Class 1 supply, a distinction the plain PSU6200 24 V/1.3 A and 12 A models do not carry. At 3.7 A it sits between the 1.3 A and 12 A PSU6200 24 V models, sized for a mid-size panel of relays, sensors and a small controller while keeping the Class 2 listing that larger-current units give up.
Applications
Fits US-market panels where the 24 V DC circuit must qualify as NEC Class 2 — signaling, alarm, or low-energy control wiring — at a load in the few-amp range.