- Home
- DIN Rail Power Supplies (24V DC)
- Schneider Electric ABL8RED24400 Phaseo Redundancy Module 24 V DC 40 A Power Supply Schneider Electric ABL8RED24400 Phaseo Redundancy Module 24 V DC 40 A Power Supply
Schneider Electric ABL8RED24400 Phaseo Redundancy Module 24 V DC 40 A Power Supply
Schneider Electric ABL8RED24400 Phaseo Redundancy Module 24 V DC 40 A Power Supply
Get Quote
- Description
The Schneider Electric ABL8RED24400 is a Phaseo redundancy module that keeps a 24 V DC auxiliary circuit powered if one of two parallel ABL8 power supplies fails. It accepts a 24-28.8 V DC input from each supply and delivers up to 40 A of combined output. A front LED per input reports supply status for fast diagnosis on the panel.
Technical Specifications
| Reference | ABL8RED24400 |
| GTIN | 3389119406871 |
| Brand | Schneider Electric |
| Range | Phaseo |
| Product Type | Redundancy module |
| Input Voltage | 24-28.8 V DC |
| Input Voltage Limits | 22-30 V |
| Input Current | 20 A |
| Maximum Output Current | 40 A |
| Output Coupling | Parallel |
| Mounting | 35 mm symmetrical DIN rail |
| IP Degree of Protection | IP20 (IEC 60529) |
| Dielectric Strength | 500 V input-ground / 500 V output-ground |
| Operating Temperature | -25 to 60 °C |
| Storage Temperature | -40 to 85 °C |
| MTBF | 2,488,391 h at 24 V DC (UTE C80-810) |
| Net Weight | 0.7 kg |
Certifications & Standards
- CE
- EAC
- RCM
- CSA C22.2 No 60950-1
- UL 508
Selection Notes
Choose the ABL8RED24400 when two ABL8RP or ABL8WP power supplies feed the same 24 V DC bus and the installation cannot tolerate a single power-supply failure taking the bus down; either unit can carry the full 40 A load if the other trips. Use the buffer module in the same series instead when the concern is a brief mains interruption rather than supply redundancy.