- Home
- Contactor Relays & Auxiliary Contactors
- Schneider Electric CAD50ABD TeSys Deca Control Relay 5 NO 24 V DC Coil Snap-In Auxiliary Contactor Schneider Electric CAD50ABD TeSys Deca Control Relay 5 NO 24 V DC Coil Snap-In Auxiliary Contactor
Schneider Electric CAD50ABD TeSys Deca Control Relay 5 NO 24 V DC Coil Snap-In Auxiliary Contactor
Schneider Electric CAD50ABD TeSys Deca Control Relay 5 NO 24 V DC Coil Snap-In Auxiliary Contactor
Get Quote
- Description
The Schneider Electric CAD50ABD is a TeSys Deca control relay with a 5 NO contact composition, rated 10 A Ith at up to 690 V AC, and a 24 V DC control circuit. It switches electromagnetic loads in AC-15 and DC-13 duty and wires into the control circuit of a motor starter or automation panel through snap-in terminals.
Technical Specifications
| Reference | CAD50ABD |
| Brand | Schneider Electric |
| Range | TeSys Deca |
| Product Type | Control relay |
| GTIN | 3606487541271 |
| Pole Contact Composition | 5 NO |
| Utilisation Category | AC-15, AC-14, DC-13 |
| [Ue] Rated Operational Voltage | ≤ 690 V AC, 25...400 Hz |
| [Uc] Control Circuit Voltage | 24 V DC |
| [Ith] Conventional Free Air Thermal Current | 10 A |
| Rated Making Capacity (Irms) | 140 A AC / 250 A DC |
| [Icw] Rated Short-Time Withstand Current | 100 A (1 s) / 120 A (500 ms) / 140 A (100 ms) |
| [Ui] Rated Insulation Voltage | 690 V |
| [Uimp] Rated Impulse Withstand Voltage | 6 kV |
| Maximum Operating Rate | 180 cyc/min |
| Connections - Terminals | Snap-In terminal |
| Mounting Support | 35 mm DIN rail or plate (screw) |
| IP Degree of Protection | IP2X (front face) |
| Ambient Air Temperature for Operation | -40...60 °C (up to 70 °C with derating) |
| Dimensions (H x W x D) | 107 x 45 x 93 mm |
| Net Weight | 562 g |
| Units per Package | 15 |
Certifications & Standards
- CE
- UKCA
- cULus
- CCC
- EN/IEC 60947-5-1
Selection Notes
Pick the CAD50ABD where the panel needs 5 NO switching in one block — the DC coil draws no steady-state inrush current once energised and avoids AC coil hum, which suits control circuits fed from a DC supply or battery backup. The snap-in wiring style is the other variant axis in this family: snap-in terminals wire without tools, which speeds up panel assembly on repeat builds. At 10 A Ith and a 100 A / 1 s short-time withstand, the CAD50ABD is sized for auxiliary and interlock duty alongside a main contactor, not as the load-switching device itself.